• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.338-338
• /
• 2017

하천기본계획, 생태하천 복원사업, 또는 하천재해예방 사업 등에 의해 수행되는 하천정비사업은 홍수재해예방, 생태하천 복구 등 여러 목적에 의해 시행되고 있다. 특히 최근 이루어지는 하천정비사업은 공원, 캠핑장, 주차장 등 시민들에게 다양한 편의시설을 제공하기 위한 친수공간으로 조성되고 있다. 이러한 하천구역 내의 친수공간 조성은 홍수주의보 및 홍수경보에 대응하는 유량에 비해 상대적으로 적은 유량에도 침수피해가 발생함으로써 중소규모의 유량에 대한 홍수위험도도 함께 증가시켰다. 친수공간 및 교량하부도로 등 저수위에 대한 홍수취약구간의 홍수정보를 취득하기 위해서는 해당 위험지점의 수위관측을 통해 위험상황을 실시간으로 모니터링 하는 것이 홍수피해에 대비하고 대응하기 위한 가장 확실한 방법이다. 하지만, 예산과 인력 등의 문제로 인해 모든 지점에 대해 수위관측을 실시하여 홍수예보시스템에 의해 홍수예측정보를 제공하기에는 현실적으로 한계가 있다. 따라서 친수공간에서의 홍수피해를 최소화하기 위해, 각 친수공간의 지형정보가 인근의 홍수예보지점 또는 수위관측소 지점과 어떠한 연관성을 갖는지 분석할 필요가 있다. 본 연구에서는 1차원 수리해석 모형을 통해 원거리에 위치한 수위관측 및 홍수정보를 이용하여 하천구역내 위치한 친수공간에 대한 침수위험도를 분석하기 위한 방법론을 제시하고자 하였다. 즉, 원거리에 위치한 수위관측소의 수위 및 유량 정보를 활용하여 수위관측이 이루어지 않는 지점의 침수정보를 예측하기 위한 방법론을 제시하고자 한다. 낙동강 하류부에 대해 제시한 방법론에 의해 목표로 하는 친수공간에 대한 유량별 수위에 대한 침수도표를 작성하였다. 본 방법론과 이에 의해 작성된 친수공간의 침수도표는 취약구간에 대한 각 수위별 침수정보를 제공하기 위한 기초자료로 활용될 수 있을 것으로 판단된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.10-19
• /
• 2013

Recently, researches related to precast modular construction have been actively conducted for nuclear power plant, LNG gas tank, and small-medium PCCV as well as bridges and buildings. In this study, the precast panel cast with steel mesh reinforced mortar (SRM) which is similar reinforced ferrocement was developed for efficient precast construction, construction time reduction, and easy transportation. Mortar mixture with high strength and flowability was obtained from various case studies using silica fume and GGBS. Also, $1,200{\times}600{\times}150mm$ SRM and reinforced concrete (RC) panels were manufactured with reinforcing ratio of 2% and 4%. To verify structural performance of the SRM specimen, the basic material tests, free shrinkage test, and 3-point flexural test with a line loading were carried out. From the test results, it was determined that SRM specimens showed outstanding flexural capacity and ductility. However, the 4% reinforced SRM specimens must consider shear reinforcing to be used as a precast modular member.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.