• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.132-136
• /
• 1999

Mechanical alloying (MA) by ball mill of $Fe_{30}Cr_{70}$ elemental powders was carried out under the nitrogen gas atmosphere. Amorphization has been observed in this case, while MA under an inert argon gas atmosphere produces the bcc solid solution. The DSC spectrum for the mechanically alloyed $(Fe_{30}Cr_{70})_{0.85}N_{0.15)$powders exhibits a sharp exothermic peak due to crystallization at about $550^{\circ}C$. Structural transformation from the bcc crystalline to amorphous states was observed through X-ray and neutron diffractions. During amorphization process the octahedral unit, which is typical of a polyhedron formed in any crystal structures, was preferentially destroyed and transformed into the tetrahedral unit. Futhermore, neutron diffraction measurements revealed that a nitrogen atom is situated at a center of the tetrahedron formed by metal atoms.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2001

The crystal structure of biotite-1M from Bancroft, Ontario, was determined by Rietveld refinement method using high-resolution neutron powder diffraction data at -26.3$^{\circ}C$, 2$0^{\circ}C$, 30$0^{\circ}C$, $600^{\circ}C$, 90$0^{\circ}C$. The crystal structure has been refined to a R sub(B) of 5.06%-11.9% and S (Goodness of fitness) of 2.97-3.94. The expansion rate of a, b, c unit cell dimensions with elevated temperature linearly increase to $600^{\circ}C$. The expansivity of the c dimension is $1.61{\times}10^{40}C^{-1}$, while $2.73{\times}10^{50}C^{-1}$ and $5.71{\times}10^{-50}C^{-1}$ for the a and b dimensions, respectively. Thus, the volume increase of the unit cell is dominated by expansion of the c axis as increasing temperature. In contrast to the trend, the expansivity of the dimensions is decreased at 90$0^{\circ}C$. It may be attributed to a change in cation size caused by dehydroxylation-oxidation of $Fe^{2+}$ to $Fe^{3+}$ in vacuum condition at such high temperature. The position of H-proton was determined by the refinement of diffraction pattern at low temperature (-2.63$^{\circ}C$). The position is 0.9103${\AA}$ from the O sub(4) location and located at atomic coordinates (x/a=0.138, y/b=0.5, z/c=0.305) with the OH vector almost normal to plane (001). According to the increase of the temperature, $\alpha$* (tetrahedral rotation angle), $t_{oct}$ (octahedral sheet thickness), mean distance increase except 90$0^{\circ}C$ data. But the trend is less clearly relative to unit cell dimension expansion because the expansion is dominant to the interlayer. Also, ${\Psi}$ (octahedral flattening angle) shows no trends as increasing temperature and it may be because the octahedron (M1, M2) is substituted by Mg and Fe.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.92-93
• /
• 2000

1961년에 비선형 광학이 시작된$^{(1)}$ 이후로 비선형 광학의 큰 응용 잠재성 때문에 많은 비선형 광학 결정이 개발되어 왔고, 현재도 많은 연구실에서 제조 및 연구되고 있다. 일단 결정이 만들어지면 결정축(X,Y,Z축)이 파악되어야 모든 연구나 응용이 가능하다. 이러한 결정축의 측정은 X선, 중성자, 또는 전자를 이용하는 회절 방법을 통하여 가능하며, 이 중 X선회절 장비가 가장 많이 쓰인다.$^{(2 4)}$ 그러나 이러한 장비들은 값이 워낙 비싸서, 결정축 측정외에 그다지 쓸모가 없는 비선형 광학 물질 제조 연구실이나 광학 연구실에서는 이 장비를 구입하기가 다소 어려운 것이 현실이다. 더구나 이 방법은 해석이 복잡하다는 단점이 있다. (중략)

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2004.05a
• /
• pp.43-44
• /
• 2004

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.189-196
• /
• 1995

Abstract The short range structure of pure $TeO_2$ glass was studied by neutron diffraction. In order to decide the values of $Te{\cdot}O$ bond length ($d_{Te-O}$) and the coordination number $(N_{Te-O})$ of oxygen atoms surrounding a Te atom, the first peak of the $Q_{max}$ = 20, 23, 25, 28 and 30 in the highly resolved RDF curves was deconvoluted by the least - squares method under the assumption that both of the pair distribution functions have a Gaussian form On the basis of these results, it is found that pure $TeO_2$ glass consists of $TeO_4$ structural units, in which Te atoms are coordinated by four oxygens and each two oxygen atoms are bonded to a Te atom with the average bond length of 1.916 $\AA$ and 2.123 $\AA$, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.167-167
• /
• 2000

전지 재료의 충방전 과정 연구에는 X-선 분말회절(x-ray powder diffraction techniques)과 중성자회절을 많이 사용하였다. 하지만 이러한 분석기술은 long-range order의 구조에 관한 정보를 제공하는데 유용하지만 atomic scale의 구조에 관한 정보를 얻기에는 한계가 있다. Li 전지에서의 전기화학적 반응에서는 cathode 물질에 포함된 전이금속의 산화, 환원 반응에 의한 Li 이온의 intercalation (charge process)과 deintercalation (discharge process) 현상이 일어난다. 이러한 충방전 과정은 알려지지 않은 다양한 형태의 위상 변화를 동반하게 되는데 x-선 이나 중성자를 이용한 powder diffraction techniques 로는 단지 정성적인 결정학적 정보를 얻을 수 있다. 따라서 최근에 원자 단위의 local structure에 관한 정보와 electrochemical state에 관한 정보를 동시에 얻을 수 있는 X-ray Absorption Fine Structure (XAFS) 분석기술을 Li 전지분석에 활용하기 시작하였다. XAFS는 하나의 x-ray 흡수원자에 대해서 주변원자들의 원자구조에 관한 정보와 구성 원소의 electrochemical state에 관한 정보를 얻을 수 있는 분석방법이다. X-ray Induced Electron Emission Spectroscopy (XIEES)는 x-ray에 의해서 방출된 전자를 검출하여 스펙트럼을 얻는 기능을 함축적으로 나타낸 것으로, x-ray를 물질 표면에 조사하여 발생하는 광전자, Auger 전자, 이차전자 등을 전자검출기(Channel Electron Multiplier: CEM)로 검출하는 기능과, 시료를 투과한 x-ray와 시료에서 발생하는 형광 x-ray를 비례계수기로 검출하는 기능을 가지고 있다. 이러한 검출 능력을 바탕으로 EXAFS, XANES, Standing Wave Technique, Elemental Composition Analysis, DXRD, Total Reflection Technique 등을 이용하여 물질을 구성하고 있는 원소의 성분, 미세원자구조, 전자구조에 관한 정보를 얻을 수 있는 새로운 spectrometer이다. 본 연구에서는 자체 개발한 XIEES의 XAFS 기능을 이용하여 여러 가지 방법으로 제조한 LiMn2-xO4와 LiMnO2, MnO2에서 Mn K-absorption edge에 대한 chemical state 변화를 측정하였다. Absorption edge에서 chemical shift를 측정하기 위해서는 방사광 가속기 수준의 에너지 분해능(~0.3eV)이 필요하다. 이번 연구에서는 SiO2(3140) monochromator를 사용하고 여기에 맞는 적절한 parameter를 적용하여 x-ray 에너지 분해능을 포항방사광가속기 수준으로 개선하였다. XIEES에서 얻은 스펙트럼과 포항방사광가속기에서 얻은 스펙트럼을 비교하였다. Chemical shift가 일어나는 경향은 두 실험 결과가 잘 일치하였다.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.38-42
• /
• 2007

The crystallographic and magnetic properties of $KFeO_2$ powder prepared by ball-mill method, have been studied by x-ray diffraction(XRD), $M\"{o}ssbauer$ spectroscopy, and vibrating sample magnetometer(VSM) measurements. The crystal structure of $KFeO_2$ powder at room temperature is determined to be an orthorhombic structure of Pbca with its lattice constants $a_0=5.557{\AA},\;b_0=11.227{\AA},\;c_0=15.890{\AA}$ by Rietveld refinement. $M\"{o}ssbauer$ spectra of $KFeO_2$ were taken at various temperatures ranging from 4.2 to 818 K. The magnetic hyperfine field and isomer shift value at 4.2 K and RT were 519 kOe, 489 kOe and 0.19 mm/s, 0.05 mm/s respectively. The average hyperfine field $H_{hf}(T)$ of the $KFeO_2$ shows a temperature dependence of $[H_{hf}(T)-H_{hf}(0)]/H_{hf}(0)=-0.36(T/T_N)^{5/2}$ for $T/T_N$<0.7, indicative of spin-wave excitation.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.38-44
• /
• 2004

The iron doped colossal magnetoresistance materials with La-Ba-Mn-O perovskites structure have been synthesized by chemical reaction of sol-gel methods. Their crystallographic and magnetic properties have been studied with x-ray diffraction, VSM, RBS, Mossbauer spectroscopy, and magnetoresistance measurements. The crystal structure of the La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$ at room temperature was determined to be orthorhombic of Pnma. The lattice parameters a$\_$0/ and c$\_$0/ increased gradually, but b$\_$0/ deceased with increase of iron substitution. The magnetization and coercivity deceased, also the Curie temperature decreased from 360 K as x increased from 0.00 to 0.05. Magnetoresistence measurements were carried out, and the maximum MR ($\Delta$$\rho$/$\rho$(0)) was observed at 281 K, about 9.5 % in 10 kOe. The temperature of maximum resistance (R$\_$MAX/) decreased with increasing substitution of Fe ions and a semiconductor-metal transition temperature (T$\_$SC-M/) decreased too. This phenomena show that ferromagnetic transition temperature decreased by substituting Fe for Mn ions, it decreases double exchange interaction. This result accords with magnetic structure of neutron diffraction. Mossbauer spectra of La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$were taken at various temperatures ranging from 15 to 350 K. With lowering temperature of the sample, two magnetic phases were increased and finally it showed the two sharp sextets of spectra at 15 K. The isomer shift at all temperature range is about 0.3 mm/s relative to Fe metal, which means that both Fe ions are Fe$\^$3+/ states.Fe$\^$3+/ states.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.318-324
• /
• 2003

The nano-scale crystallite sizes of uranium oxide powders in simulated spent fuel were measured by the neutron diffraction line broadening method in order to analyze the sintering behavior of the dry process fuel. The mixed $UO_2$ and fission product powders were dry-milled in an attritor for 30, 60, and 120 min. The diffraction patterns of the powders were obtained by using the high resolution powder diffractometer in the HANARO research reactor. Diffraction line broadening due to crystallite size was measured using various techniques such as the Stokes' deconvolution, profile fitting methods using Cauchy function, Gaussian function, and Voigt function, and the Warren-Averbach method. The non-uniform strain, stacking fault and twin probability were measured using the information from the diffraction pattern. The realistic crystallite size could be obtained after separation of the contribution from the non-uniform strain, stacking fault and twin.

• Journal of Welding and Joining
• /
• v.20 no.2
• /
• pp.50-58
• /
• 2002

Residual stress is generated in the structures as a result of irregular elastic-plastic deformation during fabrication processes such as welding, heat treatment, and mechanical processing. There are several factors attributed to the origin of residual stresses, tensile or compressive. The stresses can be determined by destructive ways or nondestructive ways using X-ray or neutron diffraction. Although X-ray diffraction is a well established technique, it is practically limited to near-surface stresses. Neutrons penetrate easily into most materials and neutron diffraction permits non-destructive evaluation of lattice strain within the bulk of large specimens because the radiation is more deeply penetrating for metallic engineering components. This paper presented application of neutron diffraction technique to the residual stress measurement using 20 mm thick welded stainless steel plate($100{\times}100 \textrm{mm}^2$)