• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.119-123
• /
• 2009

Gravity changes due to variations of groundwater level were measured at a ground water monitoring well, which is located at Kum-san, Korea, from November 2008 to September 2009 using Portable Earth Tide (PET) gravimeter. Groundwater level was monitored simultaneously with gravity observations. To extract gravity information from groundwater, we reduced gravity effect from atmospheric surface pressure, earth tides and its loading effect, polar motion and meter drift. In addition, in June 4, 2009, there was a pumping test at he observation well, and groundwater level and gravity variations were observed together successfully. Observation of gravity along with groundwater level is potentially useful for monitoring of aquifer water mass balance and water resources.

• Proceedings of the International Union of Geodesy And Geophysics Korea Journal of Geophysical Research Conference
• /
• 2003.05a
• /
• pp.19-19
• /
• 2003

본 연구에서는 국립해양조사원의 '해양2000호'를 통해 1996년과 1997년에 측정한 동해 지역의 중력자료에 대한 자료 처리를 하였다. 효과적인 자료처리를 위해 선상중력자료 처리에 필요한 각종 보정 절차와 문제점 등을 알아보았으며, 선상자료와 해면고도계자료의 비교 및 이를 통한 선상자료의 검증을 실시하였다. 선상중력자료는 측정과 처리 과정에 있어 여러 사항을 고려하여야 한다. 즉, 육상중력기점을 이용한 절대중력으로의 환산 문제, 선박 항해 위치의 부정확성에 기인하는 문제 및 중력계의 기계적 특성과 중력 측정이 이루어질 때의 해상 조건에 의한 영향 등으로 선상중력자료에 나타나는 여러 오차를 최소화하여야 한다. 선상중력자료로부터 각종 지구중력장 연구에 필요한 중력이상을 계산하기 위해 선상중력 측정시 기인되는 각종 요인의 오차를 고려한 효과적인 보정이 이루어져야 한다. 즉, 선상중력계의 기계변이 보정, 탐사선에 대한 위치 자료의 획득 및 필터링, 그리고 탐사선의 이동으로 인한 Eotvos 효과의 정확한 계산 및 보정이 필요하고, 선상중력계의 기계적 특성에 의해 나타나는 시간지연에 대한 보정도 필요하다. 또한 이러한 보정을 통해 계산한 중력 이상에서 각 교점의 오차를 보정하는 교정오차 보정도 실시하여야 한다. 특히, 탐사선의 이동으로 인한 지구자전 각속도의 상대적인 증감의 효과로 나타나는 Eotvos 효과의 영향은 선상중력자료의 정확도에 가장 큰 영향을 미친다. 이의 정확한 계산 및 보정을 위해서는 정확한 위치정보가 필요하며 본 연구에서는 이를 위해 GPS 항해정보에 대한 Kalman 필터를 실시하였고, Eotvos 효과에 대해 Savitzky-Golay 필터를 적용하여 최적의 Eotvos 보정을 시도하였다. 본 연구에서 계산된 동해지역의 중력이상에 대한 대력적인 범위는 경도 129° - 133°이고 위도 35° - 38.3° 부근이다. 이 지역에 대한 고도이상은 최소 -42.46 mGal에서 최고 161.13 mGal사이에 분포하며, 고도이상의 평균은 14.450 mGal이다. 또한 Bouguer 이상은 최소 -l5.09 mGal에서 최고 218.61 mGal이고 이의 평균은 82.681 mGal이다. 그리고 동해지역의 선상중력 측정지역에서 선상자료에 의한 중력이상과 Altimeter 자료에 의한 고도이상의 전반적인 윤곽은 비슷하면서도 일부 작은 이상의 차이가 나타났으며, 지형자료와 비교하여 보면 Altimeter에 의한 결과보다 선상측정에 의한 결과가 더욱 잘 일치하고 있어 본 연구에서 계산한 선상자료의 타당성을 알 수 있다. 고도이상의 차이는 최소 -25.94 mGal에서 최대 85.33 mGal의 차이를 보이며 차이의 평균은 3.517 mGal, RMS는 6.774 meal이다. 이는 비교적 큰 차이로 선상측정자료의 중요성과 필요성을 단적으로 나타내고 있다.

• Spatial Information Research
• /
• v.17 no.3
• /
• pp.397-404
• /
• 2009

To solve the problems of distribution and quality on land gravity data, airborne gravity survey was performed in 2008 obtaining the airborne gravity data with accuracy of 1.56mGal. Since airborne gravity data is the obtained at the flight height, it is necessary to convert the airborne gravity data to the surface to combine various gravity data and compute precision geoid. In addition, Stokes' integral radius, Stokes' kernel and the radius of terrain effect computation should be optimally determined to calculate precision geoid. In this study, we made an effort to decide the optimal parameters based on the distribution and the characteristic of gravity data. Then, two geoid models were calculated using the selected parameters and the difference of geoid was calculated with mean of -16.95cm and the standard deviation of ${\pm}8.50cm$. We consider that this difference is due to the distribution and errors on the gravity data. For future work, the study on the effect of geoid with newly obtained land gravity data ship-borne gravity data and GPS/Leveling data should be conducted. Furthermore, the study on the downward continuation and terran effect calculation should be studied in detail for better precision geoid construction.

• Journal of the Korean Chemical Society
• /
• v.39 no.11
• /
• pp.848-855
• /
• 1995

The influence of gravitational effect on the retention behaviors of polystyrene (PS) and polymethylmethacrylate (PMMA) in flat type thermal field flow fractionation (Thermal FFF) was studied. In the case of downward flow of mobile phase, the gravitational effect acting in the same direction of mobile phase flow increases as the angle of the system from the horizontal line (0˚to 60˚) increases. The decreasement of retention time of PS & PMMA was found. Also, the increasement of dimensionless λ values was found. And the difference in the retention time of PS & PMMA having different molecular weight decreases and also the resolution decreases. In the case of upward flow of mobile phase, the gravitational effect acting in the opposite direction of mobile phase flow increases as the angle of the system from the horizontal line (0˚to 60˚) increases. The increasement of retention time of PS & PMMA was found. Also, the decreasement of dimensionless λ values was found. And the difference in the retention time of PS & PMMA having different molecular weight increases and also the resolution increases.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.3
• /
• pp.255-266
• /
• 2010

In high-rise buildings, an outrigger system is frequently used as a resisting system for lateral loads. Since the outriggers tie exterior columns and an interior core, exterior columns can participate in the lateral load resisting system and the structural resistance capacity can be increased. However, the outriggers contribute for controlling gravity loads as well as lateral loads. The flows of gravity loads can be changed by the members of outriggers, for the purposes of transferring loads to mega-columns, distributing gravity loads equally among vertical members of columns, walls, or piles, minimizing differential settlements in a foundation system, and so on. In this study, by computational structural analyses of high-rise buildings over 100 floors, the effects of outriggers on controlling gravity loads are analyzed. Analyses for 3-dimensional models with or without outrigger members are performed, and then the gravity load distributions in columns and piles and foundation settlements are analyzed. Also, the effects of outriggers on gravity load controls during construction stages as well as after construction are included.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.161-166
• /
• 2006

Vertical gravity gradient measurement offers greater structural resolution and detectability than gravity alone. Practical difficulties of field measurement of vertical gravity gradient have raised questions of its accuracy and utility. But, modern automated gravimeter of $1\;{\mu}Gal$ sensitivity makes it easier to measure vertical gradient with required accuracy. It is particularly effective to engineering and environmental problems which target shallow subsurface structure. This paper attempts to apply the vertical gravity gradient technique to high resolution density mapping. The method was generally reviewed and numerical inverse modeling was executed for comparing with conventional gravity. And actual vertical gravity gradient data surveyed overt karstic cavity area at Muan was analysed and interpreted.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.267-274
• /
• 2017

The purpose of this research was to develop and present methods to detect sinkholes which can exist underneath the surface of the ground. First, we buried a water tank with dimensions $1.8{\times}0.8{\times}0.8m$ at a distance of 1.8 m from the surface. This played the role of the sinkhole. Secondly, we created a square zone with sides 12 meters away from the buried water tank. Within this zone, we measured the gravity at 1-meter intervals using a Scintrex CG5 relative gravimeter with a resolution of 0.001 mGal. Additionally, we performed three-dimensional (3-D) gravity modeling to calculate the theoretical values of the relative gravity around our model sinkhole. The resulting values for the relative gravity around the sinkhole depended on the method used. The measured effect of gravity was 0.036 mGal and the effect calculated using 3-D modeling was 0.024 mGal. Our results suggest that sinkholes that are similar in size to the water tank used in this study can be detected using relative gravity surveys. Smaller sinkholes can be detected by reducing the intervals between the relative gravity measurements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.741-747
• /
• 2008

Nowadays, the accuracy of the geoid model has been improved through development of the combination model which was composed of traditional gravimetric geoid and geometric geoid by the GPS/leveling data in USA and Japan. It is a state of the art method in geoid modeling field that what so called hybrid geoid. In this paper, as a basic study to develop Korean hybrid geoid model, we studied gravimetric geoid solutions using three gravity reduction methods (Helmert's condensation method, RTM method and Airy-isostatic method) and evaluated the usefulness of each method in context of precise geoid. The gravimetric geoid model were determined by restoring the gravity anomalies (included TC) and the indirect effects were made from various reduction methods on the EIGEN-CG03C reference field. The results are compared with respect to the geometric geoid undulation determined from 498 GPS/leveling after LSC fitting. The results showed that hybrid geoid with RTM (Residual terrain model) reduction method was most accurate method and the value of the difference compared to geometric geoid was $0.001{\pm}0.053m$.

• Journal of the Korean Society of Visualization
• /
• v.20 no.1
• /
• pp.18-28
• /
• 2022

In this study, a cavity shape measurement experiment was conducted by changing the diameter and the angle of attack of a disk cavitator. Since the gravity effect is proportional to the cavity volume, the larger the cavity, the greater the effect. It is concluded that the gravity effect becomes smaller as the cavitation number decreases because of a short cavity maintaining time. The cavity centerline rises in case of the positive angle of attack and descends in case of the negative angle of attack. Since the effect of the angle of attack is inversely proportional to the square of the cavity radius, the effect of the angle of attack becomes dominant in the vicinity of the cavitator. It is judged that the horizontal section of the cavity centerline cannot be extended because the factors affecting the gravity effect and the angle of attack effect are different.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.2
• /
• pp.51-60
• /
• 2018

This study was conducted to observe the effects of gravity and infra-gravity wave of detached submerged breakwater in the coast of Yeongnang-dong, Sokcho, as analyzing continuous wave data by performing field observations on the front area (W0) and rear area (W1, W2). Wave transmission coefficient ($K_t$) of submerged breakwater was analyzed in two parts, short-period wave (gravity wave) and infra-gravity wave. The wave energy reduction effect was analyzed and compared with the value of the design. In case of above wave height 2.0 m at the front area (W0) of the submerged breakwater, the short-period wave height at point W1 is reduced by about 65% and the short-period wave height at point W2 is reduced by about 59%. The depth of crest of submerged breakwater conducted in a sea area differs from the design, and the wave energy reduction effect is analyzed to be smaller than the design plan. The infra-gravity waves were amplified to 2.11 and 1.71 at the W1 and W2 points, respectively, and the wave height at W2 point was smaller than that at W1 point.