• Journal of Environmental Science International
• /
• v.9 no.5
• /
• pp.409-414
• /
• 2000

In order to examine the availability and effectiveness of crab shell for the removal of heavy metals in aqueous solution the crab shell was compared with cation exchange resin(CER), zeolite granular activated carbon (GAC) and powdered activated carbon(PAC) on aspects of heavy metal removal capacity rate and efficiency. In the removal of Pb, Cd and Cr, the heavy metal removal capacity of crab shell was higher than those of any other sorbents (CER, zeolite, GAC, PAC) and the order of heavy metal removal capacity was crab shell>CER>zeolite>PAC GAC. However in the removal of Cu, the result of crab shell was slightly lower than that of CER. The initial heavy metal removal rate was affected by the sorts of sorbents and metals. In all heavy metals the heavy metal removal rate of crab shell was higher than those of any other sorbents. Under the heavy metal concentration of 1.0 mmole/$\ell$ the heavy metal removal efficiency of crab shell was maintained as 93~100% which was much higher than those of any other sorbents.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.497-503
• /
• 1997

This study was performed to Investigate the utilization of waste concretes for neutralization and removal of heavy metals In plating wastewater, because waste concretes have been known to be very porous, to have high species surface area and to have alkaline minerals such as calcium. The results obtained from this research showed that waste concretes had a buffer capacity to neutralize an acidic alali system in plating wastewater. Generally, neutralization and removal rate of heavy metals were excellent in the increase of waste concrete amounts and a small size. Because a coefficient of correlation was high, it seemed that removal of heavy metals could be explained by Freundlich and Langmuir isotherms. If we reflected the adsorption capacity(k) and adsorption intensity(1/n) of Freundlich isotherm, we couldn't consider waste concretes as a good adsorbent. But, we could know that waste concretes were capable of removing a part of heavy metals. In point of building waste debris, if waste concretes substituted for a valuable adsorbent such as actuated carbon, they could look forward to an expected economical effect.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.2
• /
• pp.143-146
• /
• 1999

In order to study for Onion ethanolic extract on the Heavy Metal Elimination and antioxidation, the peroxide values of oil and eliminated metal were analyzed. The results are follows: It was very effective as a retardant for autoxidation processing of the soybean and olive oil by the Onion ethanolic extract. Quercetin in the Onion ethanolic extract was affected as a ligand for chelating with some metals. Through out this study, Quercetin in the Onion ethanolic extract was affected as eliminator of the Mercury, Lead, and Cadmium.Abstracts In order to study for Onion ethanolic extract on the Heavy Metal Elimination and antioxidation, the peroxide values of oil and eliminated metal were analyzed. The results are follows: It was very effective as a retardant for autoxidation processing of the soybean and olive oil by the Onion ethanolic extract. Quercetin in the Onion ethanolic extract was affected as a ligand for chelating with some metals. Through out this study, quercetin in the Onion ethanolic extract was affected as eliminator of the mercury, lead, and cadmium.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.3
• /
• pp.80-86
• /
• 2001

This research was carried out to investigate the effect of microscopic silica matrix coagulation on heavy metals and anion removal in mining wastewater. pH and alkalinity played an important role to coagulate heavy metals such as Al, and Fe and an anion such as ${SO_4}^{2-}$ with silica matrix as well as NaOH. However, the efficiency to form coagulates was much greater in silica matrix-treated wastewater than NaOH-treated one. Fe in wastewater formed coagulation with both silica matrix and NaOH treatments resulting in lowering Fe content in wastewater at above pH 9. For Al removal in wastewater, silica matrix-treated wastewater at above pH 12.3 formed stable coagulate with Al, while NaOH-treated one did not. Alkalinities of 89 and 220 mg/L were required to stabilize silica matrix treated coagulate with Fe and Al, respectively. Reaction time of ten minute was required to provide enough reaction for coagulation between heavy metals and silica matrix. Heavy metals and anion leachates were much lower in coagulate with silica matrix than that with NaOH, which indicates that silica matrix could be used to remove heavy metals efficiently.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1452-1456
• /
• 2008

우리나라 주요 상수원인 낙동강, 금강 등의 수질이 급격히 악화됨에 따라, 기존의 정수방법에 어려움이 발생되고 있다. 과거 염소에 의존한 수처리방법이 많이 사용되어 왔으나, 1989년 이후 중금속, THM(Trihalomethane), 페놀사건, 벤젠 등 각종 수돗물 유기물질 오염사고가 다발하면서, 활성탄 및 오존$(O_3)$ 등을 이용한 다양한 처리 시설들이 도입되기 시작했다. 이중 강력한 산화력을 지니고 있는 오존의 경우, 상수처리, 폐 배수처리, 식품의 살균 및 보관, 나아가 반도체 제조공정중의 포토레지스터의 제거에 이르기까지 폭넓게 사용되고 있다. 그러나 오존이 가지는 뛰어난 정화능력에도 불구하고, 막대한 설치비용 및 운전비용의 문제로 하수처리장과 같은 대규모 시설에서는 도입되지 못하고 있었다. 이러한 문제점을 극복하고자 본 연구에서는 재생 가능한 에너지를 오존시스템의 전력원으로 대용시킴으로써, 그 효과를 극대화시키고자 하는데 목적이 있다. 에너지 밀도가 낮지만, 지역 의존성이 적고, 청정한 무한 에너지인 수력, 풍력 및 태양에너지를 혼용한 오존 발생시스템은 소규모의 연못이나 농촌의 저수지 같은 유역뿐만 아니라, 농촌폐수로 인해 오염된 지하수의 국소지역에 대한 수처리에 사용될 수 있다.

• Journal of Environmental Health Sciences
• /
• v.20 no.4
• /
• pp.36-44
• /
• 1994

A study was carried out in order to investigate the removal efficiencies and removal characteristics of heaw metals such as Pb, Cd, Cr, Cu in raw water by one of conventional water treatment processes. The coagulants used in this study were Alum and PAC. Three kinds of water samples were provided: kaolin water, kaolin water mixed with humic acid and raw water from Han River mixed with suspended matter deposited on raw water inlet pipe. Heaw metals were added to the water samples with their respective turbidity, and jar tests were performed. In the results from heaw metal removal studies, lead might be adsorbed or exchanged on the particle surface (SS) rather than react with organic matter added. Cadmium was affected on the dissolved organic matter. Chromium was affected by the both dissolved organic matter and SS concentration, and the restabilization and the enmeshment appeared at moderate (50~80 NTU) and high (100 NTU) turbidity as defined in this experimenL The removal efficiency of copper was relatively little affected by the dissolved organic matter but by SS concentration in comparison with other heavy metals. In these studies as to the raw water turbidities and concentration of heaw metals, it is proved out that the removal efficiency on heaw metals in both cases of PAC and Alum as coagulants was not significantly different.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.435-442
• /
• 2000

Batch test and column test were performed to develop the design factors for permeable reactive barriers(PRBs) against ammonium and heavy metals, Clinoptilolite, a kind of natural zeolites having excellent cation exchange capacity(CEC), was choosen for the reacting materials through the ion-exchange mechanism. In the batch test, the reactivity of clinoptilolite for ammonium, lead, and copper was examined varying the initial concentration of contaminants(ammonium: 20, 40, 80 ppm, heavy metals: 10, 20, 40 ppm) and the particle size of clinoptilolites(0-0.15, 0.42-0.85, 1-1.25 mm). The reactivity is increasing as the initial concentration decrease and particle size decrease. In the column test, the permeability and the reactivity of the specimens were examined using flexible-wall permeameter. Specimens were made of clinoptilolite and Jumunjin-sand with 20 : 80 weight ratio varying particle size of clinoptilolite. The maximum permeability(1${\times}$10$\^$-4/-5${\times}$10$\^$-5/cm/s) was achieved in the specimen made of 0.42-0.85 mm clinoptilolite and sand.

• Journal of Environmental Science International
• /
• v.13 no.1
• /
• pp.61-68
• /
• 2004

Three kinds of toxic heavy metals, such as lead, copper, and cadmium, existing abundantly in contaminated soils were selected to investigate pH change, electroosmotic flow, and the removal rate in the application of electrokinetic process. In the change of pHs, they reached to about 12 and 2 at each cathodic and anodic region, respectively, and maintained for reaction being proceeded. Electroosmotic flow rates were not influenced by the kind of metal species but by electropotential gradient. On the soils contaminated by each metal, the removal rate of Cd was the fastest among three as in the order of Cd>Pb>Cu. While on the soils contaminated by mixed metal species, Cu was the fastest. Metal species transported by electrokinetic processes were distributed in between 0.9 and 1.0 of normalized region. In the case of soils contaminated by one kind of metal. the relative concentrations of Pb and Cd estimated in between normalized region 0.9 and 1.0 were 5.2 and 5.7, respectively.

• Journal of Environmental Health Sciences
• /
• v.21 no.1
• /
• pp.47-55
• /
• 1995

Minari(Oenanthe stolonifera DC.) lived in serious polluted water is able to remove chemical elements from batch system. This study attempted to compare the incorporation of cadmium and lead in batch system. Different concentrations of Cd(0.02 0.1 0.5 1.00 5.00 mg/l) and Pb(0.1 0.5 1.0 5.0 10.0 mg/l) were used. Toxic effects were obvious at Cd 1.00 mg/l and Pb 5.00 mg/l. The detrimental effects on minari were chlorosis of leaves and stunted roots and reduction in the number of lateral roots. There was reduction in growth rates exposed above Cd 1.00 mg/l and lead 5.0 mg/l. The minari capacities to remove Cd were 34.1-74.2% and Pb were 53.0~91.5%. The removal rates by minari in Cd and Pb solution were decreased with increased exposure concentration(in Cd r=0.97, in Pb r=0.88). The removal rates by minari in Cd and Pb solution were increased with increased growth rate(in Cd r=0.93 in Pb r=0.92). Recovery rates on minari are 67.3~95.2% in Cd water and 72.6~88.3% in Pb water. The rates are increased with increased growth rates and decreased initial concentrations.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.577-584
• /
• 2006

The binding of heavy metal ions onto cross-linked chitosan in dilute aqueous solution has been investigated as a function of pH (4.0 and 7.0), agitation period (10-180min) and concentration of various metal cations (5, 10, 50 and 100ppm). In order to obtain adsorbents that are insoluble and stable, and prevent the dissolution loss of chitosan into an acidic aqueous solution, chitosan flakes were cross-linked with epichlorohydrine (ECH) and its adsorption behavior was compared with that of the non cross-linked chitosan. An advantage of ECH is that it does not eliminate the cationic amine functional group of chitosan. In terms of adsorption ratio, the chitosan cross-linked at an ECH was inferior to original chitosan and was found that chitosan has a selectivity much remarkable than the cross-linked chitosan in low concentrated metal solutions. However, no significant decreases in the adsorption ratios were observed between the cross-linked ECH-chitosan and the non cross-linked chitosan concerning the adsorption of $Ni^{2+}$, $Co^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ acidic solution.