• Journal of Korea Soil Environment Society
• /
• v.3 no.1
• /
• pp.75-81
• /
• 1998

In most of studies on solidification/stabilization with waste, small columns have been used to examinate adsorption or leachate. However, these experiments using small apparatus have been limited to apply with the field. In this study, considering an application to the field, a large Lysimeter(100cm$\times$100cm$\times$100cm) used for the simulation. Then, the open dumping waste was mixed directly with bentonite to simulate the stabilization of waste, environmental aspects and several basic tests. As a result, the concentration of heavy metals and contaminated substances changed with bentonite rate. Most of contaminated substances were decreased in leaching with increased mixing rate of bentonite. Especially, the concentration of CODcr removed 25~30%. Also, the residual soil in dumping waste produced approximately 80% of total volume by 40$\times$40mm screen.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.596-610
• /
• 2021

For application in adsorption process, we synthesized silica nanospheres by Stober method, and silica particles with wrinkled surface as well as macroporous silica particles were also fabricated by utilizing emulsion droplet as micro-reactors, followed by modification of the particle surface using suitable coupling agents containing amine groups. These particles exhibited improved adsorption capacity for heavy metal ions and anionic dyes, which were difficult to be removed by conventional silica particles without surface modification. Anionic dye, methyl orange could be removed almost completely by adsorption using porous silica particles modified using APTES. The adsorption efficiency of heavy metal like copper ions was close to 100%, when porous silica was used as adsorbent particles modified with AAPTS.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.626-634
• /
• 2005

The objectives of this study was to assess pollution level and contamination status on tailings and soil in the vicinity of four disused metal mines in Kangwon province. As the result of total metal concentrations analysis, the pollution degree of tailings and soil decreased in the order of Wondong > Second Yeonhwa > Sinyemi ${\fallingdotseq}$ Sangdong mines. Total metal concentrations of mine tailings in this study were $1.2{\sim}78.2$ and $1.1{\sim}80.6$ times higher than those in the background soil and the tolerable levels suggested by Kloke, respectively. From these results, we found that tailings served as contamination source of nearby soil. According to sequential extraction of metals, large proportion of heavy metals in all mine tailings existed in the form of a residual fraction, and heavy metals in non-residual form was mainly associated with Fe-Mn oxide fraction and sulfidic-organic fraction. Fe-Mn oxide fraction and sulfidic-organic fraction of heavy metals may be released into and contaminated the nearby environment under the oxidation or reduction condition in long-term. In particular, the proportions of the exchangeable and carbonate fraction of Cd in mine tailings from Second Yeonhwa mine were relatively high. This suggests that Cd may be easily released into and contaminated the nearby environment in the near time. Concentrations of heavy metals in mine tailings and the nearby soil exceeded the standard (agricultural area) of Soil Environment Conservation Law. So it was thought that remediation for mine tailings and the nearby soil is needed. The pollution indices of the samples in this study were for higher than 1.0 and the pollution degree was very serious. Priority remediation site for these mines was Wondong. As Results of danger indices, it was showed that exchangeable form in Wondong and Fe-Mn oxide form in the rest mines should be removed preferentially.

• Journal of Wetlands Research
• /
• v.18 no.2
• /
• pp.194-200
• /
• 2016

The impervious surface rate increased by urbanization causes various problems on the environment such as water cycle distortion, heat island effect, and non-point pollutant discharges. The Low Impact Development (LID) techniques are significantly considered as an important tool for stormwater management in urban areas and development projects. The main mechanisms of LID technologies are hydrological and environmental pollution reduction among soils, media, microorganisms, and plants. Especially, the media provides important functions on permeability and retention rate of stormwater runoff in LID facilities. Therefore, this research was performed to assess the pollutant removal efficiency for different types of media such as zeolite, wood chip, bottom ash, and bio-ceramic. All media show high pollutant removal efficiency of more than 60% for particulate materials and heavy metals. Double layered media is more effective in reducing heavy metals by providing diverse sizes of micro-pores and macro-pores compared to the single layered media. The results recommend the use of different sizes of media application is more cost-effective in LID than a single size of media. Furthermore, soluble proportion of total heavy metal in the stormwater is an important component in proper media selection and arrangement.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.1
• /
• pp.67-73
• /
• 2014

In this study, the residual heavy metals in the mine tailings, primarily treated by soil washing, were stabilized using phosphate salts. The concentrations of residual contaminants in the washed mine tailings were As (1,861 mg/kg), Cd (20 mg/kg), Cu (56 mg/kg), Pb (2,149 mg/kg), and Zn (633 mg/kg). They were stabilized with $CaHPO_4$, $Ca(H_2PO_4)_2{\cdot}H_2O$, and hydroxyapatite at 0.1 wt%, 1 wt%, and 10 wt% for 1, 3, 5, 7, and 14 days. It was found that 1 wt% $Ca(H_2PO_4)_2{\cdot}H_2O$ was optimum in our experiments, but the stabilization duration did not affect the efficiency. After stabilization with 1 wt% $Ca(H_2PO_4)_2{\cdot}H_2O$ for 1 day, the concentrations of arsenic and heavy metals, As (0.328 mg/L), Cd (0.250 mg/L), Cu (0.143 mg/L), Pb (0.359 mg/L), and Zn (2.622 mg/L), in TCLP leachate were below the RCRA-TCLP limits, which meant the contaminants in the treated mine tailings were stably immobilized.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.373-378
• /
• 2019

In the marine area, the salt concentration in the soil increases, and the inland heavy metal pollution increases the damage of plants. In the inland industrial development area, researches on the genetic resources of plants together with the heavy metal accumulation of Co, Ni, Zn, and so on are required. Both of these problems have caused scientists to work hard to find plants that are likely to cause stress in plant roots. In this study, seeds of Arabis stelleri var. japonica collected near the shore were used for germination. The growth and development and tolerance of both Arabis and Arabidopsis seeds were investigated under laboratory culture conditions. As a result, Arabis showed resistance about 3 times in 250 mM nickle and cobalt, and more than 4 times in 1 mM zinc when compared to Arabidopsis. The tolerance of Arabis to Na salts increased by 20% or more at 50 mM concentration and Arabis was resistant to heavy metals and salt concentration. The accumulation of Na ions in the body was measured as a preparation for studying the intracellular mechanism. As a result, it showed a further decrease in resistance to ground water roots. It is considered that the activity of the exporting gene is important rather than the mechanism of accumulation.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.68-76
• /
• 2002

In this study, we have investigated the geochemical behavior and fate of heavy metals in acid rock drainage (ARD). The ARD was collected from the area of the former Dongrae pyrophyllite mine. The Dongrae Creek waters were strongly acidic (pH : 2.3~4.2) and contained high concentrations of $SO_4$, Al, Fe, Mn, Pb, Cu, Zn, and Cd, due to the influence of ARD generated from weathering of pyrite-rich pyrophyllite ores. However, the water quality gradually improved as the water flows downstream. In view of the change of mole fractions of dissolved Fe, Al and Mn, the generated ARD was initially both Fe- and AA-ich but progressively evolved to more Al-rich toward the confluence with the uncontaminated Suyoung River. As the AR3 (pH 2.3) mixed with the uncontaminated waters (pH 6.5), the pH increased up to 4.2, which caused precipitation of $SO_4$-rich Fe hydroxysulfate as a red-colored, massive ferricrete precipitate throughout the Dongrae Creek. Accompanying the precipitation of ferricrete, the Dongrae Creek water progressively changed to more Al-rich toward downstream sites. At the mouth of the Dongrae Creek, it (pH 3.4) mixed with the Suyoung River (pH 6.9), where pH increased to 5.7, causing precipitation of Al hydroxysulfate (white precipitates). Neutralization of the ARD-contaminated waters in the laboratory caused the successive formation of Fe precipitates at pH<3.5 and Al precipitates at higher pH (4~6). Manganese compounds were precipitated at pH>6. The removal of trace metals was dependent on the precipitation of these compounds, which acted as sorbents. The pHs for 50% sorption ($pH_{50}$) in Fe-rich and Al-rich waters were respectively 3.2 and 4.5 for Pb, 4.5 and 5.8 for Cu, 5.2 and 7.4 for Cd, and 5.8 and 7.0 for Zn. This indicates that the trace metals were sorbed preferentially with increasing pH in the general order of Pb, Cu, Cd, and Zn and that the sorption of trace metals in Al-rich water occurred at higher pH than those in Fe-rich water. The results of this study demonstrated that the partitioning of trace metals in ARD is not only a function of pH, but also depends on the chemical composition of the water.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.375-379
• /
• 2000

Alginate derivatives possessing various lengths of alkyl amine (C8, C12, C16) chain were prepared by oxidation followed by reductive amination of alginate and the products were characterized by spectral analysis. The surface tension critical micelle concentration (c. m. c) and solubility of a hydrophobic compound azobenzene were examined. Series of synthesized alginate-derived polymeric surfactants(APSs) reduced the surface tension. The dissolving capacity of APSs toward azobenzene was about half that of SDS. In order to investigate the capacity of metal adsorption Co and Pb were selected as a representative metal. The overall removal efficiency of APSs were high compared with that of alginate at pH 3.5 and 7 respectively. Major mechanism of the heavy metal removal is the complex of metal with carboxyl group.

• Clean Technology
• /
• v.12 no.1
• /
• pp.37-44
• /
• 2006

The effectiveness of inorganic oxides (DT-30), anionic exchange resin (DT-60) and carbon absorbent (DT-80, DT-90) on the equilibrium and continuous separation characteristics and removal of cobalt, cesium and iodide ion in the waste water was investigated. As a result, DT-30, DT-80 or DT-90, and DT-60 showed excellent separation properties on the cesium, cobalt and iodide respectively. In the equilibrium experiment, the adsorption amount of cesium for DT-30 increased with temperature, but increasd largely with pH. In case of DT-80, adsorption of cobalt was depended on pH but was not influenced by temperature. In the continuous system by passing a heavy metal ion solution through the ion exchange tower, DT-30, DT-90 and DT-60 showed good separation characteristic for cesium, cobalt and iodide respectively. In this case, separation characterization of DT-30 on the cesium and of DT-60 on the iodide were better than that of DT-90 on the cobalt. From the experiment on the effect of impurities on the ion exchange characteristics, impurities such as surfactant and oil did not influence the efficiency of DT-90. In the mean while, ion separation capacity of DT-30 were decreased largely by impurities such as surfactant and oil. Also, surfactant had a strong influence on the effectiveness of DT-60. Accordingly, it turned out to be very important thing that impurities should be removed in the preprocessing stage.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.332-340
• /
• 2007

Storm runoff from road contains significant loads of particulate and dissolved solids, organic constituents and metal elements. Micro particle is important when considering pollution mitigation because pollutant metal and organics have similar behavior with particles. The objective of this research is to evaluate the hydrodynamic filter separator performance for road storm runoff treatment. A various types of media such as perlite, granular activated carbon, zeolite were used for column test packing media and filter separator, and to determine the removal efficiency with various surface loading rate. As the results of column test, the highest SS removal efficiency was using mixed media(granular activated carbon, zeolite and perlite), and granular activated carbon mixed with zeolite has higher heavy metal removal efficiency than perlite. In laboratory scale hydrodynamic filter separator study, the operation ranges of surface loading rates were from 192 to 1,469 $m^3/m^2/day$. The estimated overall removal efficiencies of hydrodynamic filter separator for typical storm runoff were SS 48.1%, BOD 31.9%, COD 32.6%, TN 15.5%, and TP 17.3%, respectively. For the case of heavy metals, overall removal efficiencies were Fe 26.0%, Cu 19.4%, Cr 25.7, Zn 16.6%, and Pb 15.0%, respectively. The most appropriate medium for hydrodynamic filter separator was perlite mixed with granular activated carbon to treatment of road storm runoff.