• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.167-170
• /
• 2005

대부분의 폐광산 주변 농경지 토양은 비소 및 여러 중금속으로 오염되어 있으며, 이러한 중금속들의 지속적인 용출에 의해 주변 지하수 오염과 재배 농산물의 중금속 축적이 우려되고 있다. 오염토양에서의 중금속 용출에 의한 오염을 막기 위하여 본 연구에서는 개량제를 이용한 안정화 공법을 선택하여 하부로 배출되는 중금속의 용출율을 감소시키는 실험을 실시하였다. 생석회(CaO)를 개량제로 이용하여 실제 오염 농경지 현장과 비슷한 대형칼럼을 제작한 후 인공강우를 주입, 하부로 용출되는 중금속의 농도를 측정함으로써 생석회 첨가에 의한 용출율 감소를 규명하였다. 개량제를 비오염토와 혼합하여 오염토양 상부에 복토한 것과 오염토와 혼합하여 객토한 칼럼을 각각 제작하였으며 투입되는 생석회의 양도 $2{\sim}10%$로 다양하게 적용 하였고, 첨가된 개량제의 성상도 분말과 입상으로 나누어 실험하였다. 주입하는 인공강우는 연구지역 주변의 10년간의 연 평균 강수량을 토대로 산정하였으며, 복토와 객토를 하지 않은 오염토양도 같은 조건에서 용출을 실시하였다. 실험결과 생석회의 성상에 따른 중금속 용출율의 차이는 없었으며, 개량제 함량은 5%가 적당한 것으로 나타났다. 복토와 객토를 비교하였을 때 용출되는 중금속의 농도는 객토가 복토에 비해 낮아 중금속 용출율 감소효과가 매우 큰 것으로 나타났으며, 중금속의 종류에 따라 용출율 감소의 차이를 나타내었다. 복토법의 경우 As의 용출율은 분말 생석회를 5% 복토한 경우 용출율이 10배 감소하고 Cd의 경우 2%와 5% 복토한 경우 각각 25배와 161배 감소하는 것으로 나타났다. Pb의 경우 생석회로 5%로 복토한 경우 10배정도의 용출율 감소를 보였고 Zn의 용출율은 분말, 입상 생석회를 5% 복토한 경우 80배$\sim$155배 감소하는 것으로 나타났다. 객토법의 경우 입상생석회를 5% 복토한 경우 Cd과 Zn 각각 200배에서 400배의 용출율 감소를 나타내었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.385-388
• /
• 2003

폐광석에 함유되어 있는 총중금속함량을 측정하기 위한 전함량분석과 중금속을 다량 함유한 폐광석이 산성환경에 노출되어 있을 경우 중금속의 지화학적 거동을 파악하기 위해 산도를 변화시키면서 용출실험을 실시하였다. 전함량분석과 용출실험을 종합한 결과, 중금속 및 미량원소의 용출거동 특성을 크게 As-Co-Fe 형태와 Cu-Mn-Cd-Zn형태와 Pb로 구분할 수 있었다. As-Co-Fe의 용출특성은 약산성의 환경에서는 용출이 미약하나, 최종 pH 1.5이하의 강산성환경에서는 용출량이 급격하게 증가하며, Cu-Mn-Cd-Zn형태에서는 최초로 용해되는 pH가 5.0-3.0으로 As-Co-Fe 보다 다소 높았다. Pb는 다른 형태에 비해 상당히 적게 용출되었다 최종 용출된 함량과 관계없이 초기 용출이 발생하는 pH값을 기준으로 한 각 원소의 상대적인 이동성은 Mn =Zn>Cd=Cu>>Fe=Co>As>Pb 순서이며, 산성비는 Zn, Mn 및 Cu를 쉽게 용출시켜 이동도를 증가시킬 것으로 판단된다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.249-253
• /
• 2001

퇴적물에 오염된 중금속의 지화학적 특성을 규명하고자, 연속추출방법을 이용하여 구성광물 과의 지구화학적 수반관계와 산성화에 따른 중금속 용출특성을 연구하였다. 용출실험과 연속추출 실험을 종합한 연구결과, 서울시 도로변의 하수퇴적물이 산성비와 같은 요인에 의해 pH 5.0정도의 약산성환경과 접촉하였을 때 중금속의 상대적인 용출특성은 Zn>>Cd$\geq$Co>Ni>Cu$\geq$Pb>Cr이며, 원소별 용출량은 Zn 40-90%, Cd 10-30%, Co 15-25%, Ni 5-25%, Cu 0-20%, Pb 0% 및 Cr 0% 이었다. 하수퇴적물에 오염된 Zn, Cd, Cu 및 Ni의 용출은 매우 우려할 만한 수준이며, 수계의 물리화학적 변화(pH 등)에 따라 이들 원소의 일부분이 용해되어 지표수 및 강물을 오염시킬 것으로 예상된다.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.457-469
• /
• 2009

Applicability of bioleaching techniques using a sulfur-oxidizing bacteria, Acidithiobacillus thiooxidans, for remediation of shooting range soil contaminated with toxic heavy metals was investigated. The effects of sulfur concentration, the amount of bacterial inoculum and operation temperature on the efficiency of heavy metal solubilization were examined as well. As sulfur concentration and the amount of bacterial inoculum increased, the solubilization efficiency slightly increased; however, significant decrease of heavy metal extraction was observed with no addition of sulfur or bacterial inoculum. Bacteria solubilized the higher amount of heavy metals at $26^{\circ}C$ than $4^{\circ}C$. Lead showed the highest removal amount from the contaminated soil but the lowest removal efficiency when compared with Zn, Cu and Cr. It was likely due to formation of insoluble $PbSO_{4(s)}$ as precipitate or colloidal suspension. Sequential extraction of the microbially treated soil revealed that the proportion of readily extractable phases of Zn, Cu and Cr increased by bacterial leaching, and thus additional treatment or optimization of operation conditions such as leaching time were required for safe reuse of the soil. Bioleaching appeared to be a useful strategy for remediation of shooting range soil contaminated with heavy metals, and various operating conditions including concentration of sulfur input, inoculum volume of bacteria, and operation temperature exerted significant influence on bioleaching efficiency.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.33-36
• /
• 2005

생활폐기물을 소각한 후 발생되는 바닥재는 토목, 건설 분야에서 골재로서 활용 가치가 높으나, Cu, Pb 등 일부 중금속의 용출량이 환경기준치를 초과하여 바닥재의 재활용을 저해시키는 주요 요인으로 작용하고 있다. 본 연구에서는 바닥재의 중금속 용출을 저감시키기 위한 방법으로서 인위적인 탄산화에 의한 생활폐기물 소각 바닥재의 중금속 안정화 특성을 조사하였다. 4mesh를 기준으로 각 입단에 대해 고액비, 온도, $CO_2(g)$ 주입량에 따라 중금속 용출농도를 조사하였다. 중금속용출시험 결과 Pb, Cr, Cd, As는 미량 또는 불검출되었으며, Cu는 4mesh 이상에서 2.21mg/L, 4mesh이하에서 5.12mg/L로 4mesh이하에서 환경기준치를 초과하였다. 4mesh이하에 대해 탄산화 반응을 수행한 결과 $CO_2(g)$ 주입됨에 따라 pH는 초기 12.5에서 8까지 감소하였으며, Cu의 용출 농도는 pH 10에서 1.34mg/L까지 감소되었으며, pH 9-8에서는 불검출되어 탄산화 반응에 의해 바닥재의 환경적 안정성을 증진시킬 수 있음을 확인할 수 있었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.665-675
• /
• 2010

The effects of chemical binders (ladle slag, ordinary portland cement (OPC), hydroxyapatite and calcium hydroxide) on the solidification/stabilization of heavy metals (Cd, Cu, Ni, Pb, Zn) in sewage sludge were evaluated by chemical leaching tests such as EDTA extraction, TCLP and sequential extraction. The results of EDTA extraction showed that heavy metal concentrations in sewage sludge were highly reduced after solidification/stabilization with slag, cement or calcium hydroxide. However, EDTA interrupted solidification/stabilization of heavy metals by hydroxyapatite. The TCLP-extracted heavy metal concentrations in sewage sludge after solidification/stabilization with chemical amendments were highly reduced. However, Cu concentration in the sewage sludge solidified/stabilized with slag, cement or calcium hydroxide increased because the pH of TCLP solution was higher than 7. Mixtures of sludge 1 : slag 0.2 : calcium hydroxide 0.1 (wt ratio) showed the least leachability in batch TCLP and EDTA extraction. The results of sequential extraction (SM&T, formaly BCR) indicated that the distribution of heavy metals changed from exchangable and carbonate fractions to strongly bound organic fraction. It was found that maximum leachate concentrations of Ba, Cd, Cr and Pb from sewage sludge amended with slag and calcium hydroxide were far below US EPA TCLP regulations.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.303-312
• /
• 2019

In this study, X-ray diffraction, ICP analysis, and leaching experiments were performed to analyze the heavy metals and dissolution characteristics of Andong dam sediments. As a result of X-ray diffraction analysis, Andong dam sediment consists of quartz, plagioclase, chlorite and illite. ICP analysis of sediment showed very high concentrations of As and Cd. Leaching experiments were performed in aerobic and anaerobic condition in a disturbed state. The results of leaching experiment showed that more heavy metals were leached in aerobic than anaerobic conditions. Heavy metal that increased in concentration with time in aerobic conditions were Mn, Zn and Cd, and those in anaerobic conditions were Mn, Fe and As. The leaching ratio of heavy metal concentration in sediment was Mn > Cd > Zn > Ni > Cu > As > Pb ≒ Fe ≒ Cr and Mn > As > Cu > Ni > Zn > Pb ≒ Cd ≒ Fe ≒ Cr in aerobic and anaerobic conditions, respectively.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2005

Fractional compositions and leaching potentials of Cd, Cu and Zn were investigated in the soils which had been disposed with the metal processing wastes, tungsten mine tailings and low quality coal mine area. Total concentrations of metals in these soils were higher than in non-polluted paddy and upland soils. Fractions of Cd, Cu and Zn were mostly reducible, organic and residual forms, but varied with origins of wastes. Residual fraction was a predominant form in the nonpolluted soils. Leaching potentials of metals were higher in polluted soils than in non-polluted soils. Metals leached were higher at pH 4.0 than 7.0 and increased with the duration time. After 25 to 35 hrs, metals released from soils reached a pseudoequilibrium. Leaching potential of metals in non-polluted soils was low due to high percentage of residual fractions.

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.383-392
• /
• 2008

This study aims to evaluate the mechanical-chemical stability of used coal ash blocks, for improving fishing grounds. The surface of weathered ash blocks in seawater showed a decrease in the Ca and an increase in the Mg contents, compared to that of fresh blocks. This result reflects the substitution of Ca by Mg in seawater. The compressive strengths of ash blocks submerged into seawater during 12 months ranged from 235.23 to $447.43\;kgf/cm^2$; this is higher than the standard strength of wave-absorbing blocks($180\;kgf/cm^2)$ that are used for harbor construction. In addition, the compressive strength of ash blocks tends to increase with increasing installation time in seawater. The result of leaching experiments on coal ash blocks by Korean Standard Leaching Test(KSLT) method showed that leached concentrations of most metals except Cr(that leached up to 50 ppb, approaching standard concentration) do not exceed the seawater quality standards. A long-term(112 days) heavy metal leaching test to analyze seawater without mixing-dilution also showed that the concentrations of leached heavy metals, except for Cu, under anaerobic conditions do not exceed the seawater quality standards. Accordingly, the use of coal ash blocks in marine environments appears to be safe from chemical and mechanical factors that decrease the efficiency of concrete. Also, leaching concentration of Cu seems to be stable by decrease of leaching concentration due to dilution of seawater.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.2
• /
• pp.88-93
• /
• 2006

To recycle the electric arc furnace (EAF) dust as a ceramic raw materials, the leaching concentrations of heavy metals (Zn, Pb, Cr, Cd) were analysed with various pH and mixing ratios for EAF dust and EAF dust-clay mixtures. The evaporation amounts of the some heavy metals were evaluated by measuring their total concentrations in the sintered bodies of EAF dust-clay mixtures with various mixing ratio and sintering temperature. Toxicity characteristic leaching procedure (TCLP) test was conducted for evaluating the chemical stabilities of the heavy metal elements. Leaching concentrations of heavy metal ions shows minimum leaching concentration at the pH 10. Evaporation amount of heavy metals in the sintered bodies were evaluated for the mixtures of pH 10 depenidng on mixing ratio and sintering temperature. Evaporation of heavy metal components were increased with increasing the sintering temperature and contents of the EAF dust. The evaporation of the heavy metal components in EAF dust was effectively suppressed by increasing the clay content. The leaching concentrations of heavy metal components were decreased with increasing clay content and temperature.