• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.55-56
• /
• 2008

본 연구에서는 국내 기업에서 개발된 Nyoln P 입자첨가 마스터배치를 이용하여 방사공정에서의 방사온도와 Nylon sheath와 PET core 비율을 변화시켜 용출형 Nylon 중공사를 방사하여 용출온도, 용출시간 등 용출조건의 변화에 따라 Nylon 중공사의 중공율에 미치는 영향에 대해 분석하였고, 또한 용출된 상태를 보기 위해 용출형 나일론 중공사의 SEM 사진을 측정하였다. 이러한 결과를 토대로 개발된 나일론 용출형 중공사를 이용하여 고부가가치의 나일론 용출형 중공사 제품의 상품화 기술을 개발하는데 도움을 주는데 본 연구의 목적이 있다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.04a
• /
• pp.33-33
• /
• 1993

건습식방사법에 의한 폴리설폰중공사를 제조함에 있어 여러가지의 방사조건을 변화시켜 이에 따른 중공사의 다양한 구조를 검토하고 이들의 투과특성을 조사하였다. 본 연구에서는 이러한 문제점을 인식하고 Polysulfone 중공사막의 제조시 여러가지의 방사조건을 세분하여 방사높이, 방사용액 및 내부응고제의 양의 변화등의 방사변수에 따른 구조 및 투과특성 그리고 내부스킨층만이 존재하는 중공사와 외부스킨층만이 존재하는 중공사를 제조할 수 있는 특정조건을 확립한 후 이들의 상전이공정에 따른 변수를 도입하여 중공사를 제조하여 그 투과성능을 상전이공정과 연결시켜 해석하였다.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.27-32
• /
• 2002

The purpose of this study was to evacuate the effects of the number of tied hollow fibers in a novel membrane oxygenator that satisfied the limiting factor of minimizing the friction loss in the intravascular blood flow Pattern. The membrane oxygenator is a bundle consisted of several hundred ho1low fibers haying the outside diameter of 380 $\mu m$ and the axial jacket length of 600 mm. The eight different variation of tied hollow fibers in a bundle were designed. and the liquid flow pattern was controlled by a pump. The liquid pressure drop was measured by in vitro experiments using water and g1ycero1. Uniform blood flow pattern was observed for each number of tied hollow fibers. Pressure drop was 13-16 mmHg outside of the membrane oxygenator consisting of up to 700 ho1low fibers. More effective contact of liquid with the tied ho1low fibers was observed as a decrease in the number of the tied hollow fibers. and resulted in the enhancement of the friction tractor

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.90-93
• /
• 1997

1. 서론 : 본 연구에서는 수처리용으로 사용되는 PE 중공사 분리막을 HDPE/LP 혼합계의 열유도 상분리법을 이용하여 제조하고 PE의 MPR(Melt Flow Rate), 희석제 함량, 방사조건 등이 중공사 분리막의 물성변화에 미치는 영향을 투수 계수를 중심으로 검토하였다.

• Membrane Journal
• /
• v.15 no.3
• /
• pp.233-240
• /
• 2005

Surface modification of polypropylene hollow fiber membranes was performed in order to develop blood-compatibility biomaterials for use in the blood contacting surfaces and oxygenation membranes of a lung assist device (LAD), important medical device even more useful. Blood compatibility of materials was determined by using anticoagulation blood and evaluating formation of blood clots on their surfaces as well as activation of plasma coagulation cascade, platelet adhesion, and aggregation. It was verified that the number of platelets on the silicone coated fibers was significantly lower than that on untreated fiber membrane, indicating improved blood compatibility. It was also found that the polypropylene hollow fiber membranes using plasma treatment exhibited suppression of complement activation in blood compatibility test.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.119-128
• /
• 2013

In this research, PEI/PEBAX composite hollow fiber membrane was used for the removal of water vapor from gases. PEI (Polyetherimide) substrate membrane was spinned by dry-wet phase inversion method and coated with PEBAX (Polyether block amides) 3533 and PEBAX1657. Fabricated fibers typically had an asymmetric structure of a dense top layer supported by a sponge-like substructure through scanning electron microscopy (SEM). $H_2O/N_2$ mixture gas was used to compare the performance of separation according to temperature, pressure and water activity. The results of PEBAX3533 and PEBAX1657 composite membranes respectively showed $H_2O/N_2$ selectivity of 61.7~118.5 and 85.3~175.4 according to operating conditions. PEBAX3533 composite hollow fiber membranes module showed the water vapor removal of 90%.

• Membrane Journal
• /
• v.2 no.1
• /
• pp.67-73
• /
• 1992

The effects of after-treatment condition on the permeability of polysulfone hollow fiber membranes were investigated. It was well known that the permeability of and the rejection of hollow fiber membranes prepared by dry-wet spinning technique was highly affected by spinning conditions such as composition of spinning solution, inner and outer coagulant and spinning height. But these are also governed by after-treatment condition such as drying, hot water treatment and glycerine treatment. Since it was difficult to remove DMAc and NMP in membranes by washing with in cold water and even traces of such solvent affected the reproducibility of the membrane characteristics, the hot water-treatment should be required.

• Science of Emotion and Sensibility
• /
• v.17 no.4
• /
• pp.71-78
• /
• 2014

Composite draw textured yarns(DTY) and air jet textured yarns(ATY) with hollow PET filament have been used for making high emotional fabrics including light weight sports wear garments. This study investigated effect of hollow composite yarns and fabric structural parameters to the comfort properties related to the moisture and thermal transport phenomena for the composite fabrics made of DTY and ATY with hollow PET filament. Wicking property of hollow composite fabric was superior at the high pore size fabric and was not influenced by fabric cover factor. Wicking property of the fabric with ATY was better than that of the fabric with DTY. On the other hand, drying rate of fine pore sized fabric was shorter than that of large pore sized fabric and drying rate of high multi yarn fabric with low cover factor and small pore size was superior than that of hollow composite fabric. The pore size of the fabric was dominant factor in the air permeability and thermal conductivity of hollow composite fabric. High pore sized fabric showed high air permeability and thermal conductivity of hollow composite fabric was nonlinearly inversely proportional to pore size of the fabric.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.104-104
• /
• 2012

아웃도어용 스포츠웨어 의류분야는 소비자들의 욕구가 기능성, 착용감, 패션성을 매우 중시하는 고감성, 고기능성 제품특성을 요구하고 있으며 이를 가장 충족시킬 수 있는 패션 트랜드로서 보온, 경량화 제품이 가장 급부상하고 있는 아이템이다. 경량성의 쾌적 스포츠 웨어에 사용되는 주요 합섬소재인 PET, Nylon을 이용하여 소재의 세섬화, 중공 소재를 통한 제품 개발이 대부분으로 보온, 경량, 속건 등 의복에서의 쾌적 기능성을 개선하기 위하여 개발되는 소재 및 제품의 경량화, 보온 및 흡한속 건성 부여를 통한 기능 요소와 신질감 발현의 촉감요소를 통한 차별화 된 제품개발이 요구되고 있다. 보온 기능성을 부여하는 기술로써 가장 일반적인 기술은 섬유 내부에 중공을 형성하여 경량성과 보온성을 동시에 가지는 기능성 원사 제조 기술과 섬유 내에 열에너지를 흡수할 수 있는 물질을 넣어 외부의 태양광을 섬유내로 흡수하여 열에너지로 전환, 축적함으로서 보온성을 향상시키는 방식이 있다. 주로 경량 보온의 동시 발현을 위하여 중공 형성을 통한 보온 소재 개발이 활발하게 일어나고 있는 실정이다. 가장 많은 수요를 차지하고 있는 경량 보온성 중공사의 경우, 강도 저하, 염색 불량 등의 공정 애로점이 발생하며, 제직 및 가공 공정 시 원사 내 중공이 찌그러짐이 발생하므로 완제품 제조 후에는 중공의 기능이 제대로 발현되지 못하는 문제가 발생한다. 또한 알칼리 또는 용제를 사용하여 후용출 하는 중공사의 경우, 공정이 복잡함은 물론 환경에 유해한 공정이다. 특히, 감량 후 직물의 인열강도는 감량 전과 비교하여 감소하게 되는데 이는 이용성 polymer가 용출되면서 생긴 중공에 의해 섬도가 감소되어 강도가 저하됨을 알 수 있다. 따라서 Sheath 부분에 최대한 손상을 주지 않으면서 Core 부분을 완전 용출 시킬 수 있는 감량 조건을 확보할 필요가 있다. 이에 보온성, 경량성의 기능을 극대화시키고, 중공률 유지하는 최적 용출 가공 조건을 확립하고자 연구하였다.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.237-244
• /
• 1996

Liquid-liquid extractions by use of microporous hollow fiber modules are fast compared with conventional extraction equipment because of the large surface area per volume. In these modules, the extractant and feed can be contacted at high speed and two flows are completely independent, so there are no problems with loading and channeling. In this paper, it was investigated the extraction selectivities for liquid-liquid extraction of Fe(II) and Ni(II) from dilute aqueous solution into TOA (tri-n-octylamine) and EHPNA (bis(2-ethylhexyle)hydrogenphosphite) as organic extractants by using the hydrophobic hollow fiber module. To determine the rate controlling step for mass transfer in hollow fibers, we also examined the effect of inside and outside flow rates of the hollow fiber module. From these experiments, we identified for the extraction of system with high partition coefficient in hydrophobic hollow fibers, mass transfer in the inside aqueous feed dominated the overall mass transfer, and in this paper, correlation between $K_w$ and $v_t$ was obtained as $K_w{\frac{d}{D}}=6.22\(\frac{d^2v_t}{LD}\)^{1/3}$ On the other hand, for the system with low partition coefficient, the resistance in the inside of hollow fibers was much less than membrane resistance because the extraction was not simple in the micropore. Thus, for systems with high partition coefficients, hydrophobic hollow fibers would be a better choice.