• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.143-157
• /
• 1992

For the design of structural systems having the prescribed or optimum dynamic characteristics, some design changes of the initially designed system are required. In these cases, if the sensitivity analysis which can predict the changes of dynamic characteristics due to the changes of design variables is applied, the design changes can be carried out rationally and very efficiently. For many structural systems, it is well known that the analysis by the transfer matrix method(TMM) and the combined finite element-transfer matrix method(FETMM) is more efficient than the analysis by the finite element method. However, most known studies on the sensitivity analysis of structural systems premise using the finite element method. In this paper, the sensitivity analysis methods by the TMM and the FETMM are presented and some numerical investigations on the beam-column with elastically restrained ends and intermediate contraints and the stiffened plate having subsystems are carried out. The results of the numerical examples show good accuracy and computational efficiency of the presented methods, and show that the application of sensitivity analysis in the dynamic characteristic reanalysis give good results within the practically changeable range of design variables.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.379-389
• /
• 2020

In this study, the flow and noise performances of high-speed fan motor unit for cordless vacuum cleaner is improved by optimizing the impeller which drives the suction air through flow passage of the cordless vacuum cleaner. Firstly, the unsteady incompressible Reynolds averaged Navier-Stokes (RANS) equations are solved to investigate the flow through the fan motor unit using the computational fluid dynamics techniques. Based on flow field results, the Ffowcs-Williams and Hawkings (FW-H) integral equation is used to predict flow noise radiated from the impeller. Predicted results are compared to the measured ones, which confirms the validity of the numerical method used. It is found that the strong vortex is formed around the mid-chord region of the main blades where the blade curvature change rapidly. Given that vortex acts as a loss for flow and a noise source for noise, impeller blade is redesigned to suppress the identified vortex. The response surface method using two factors is employed to determine the optimum inlet and outlet sweep angles for maximum flow rate and minimum noise. Further analysis of finally selected design confirms the improved flow and noise performance.

• Korean Journal of Materials Research
• /
• v.10 no.12
• /
• pp.793-798
• /
• 2000

The age-hardening behavior of unreinforced 6061 Al alloy and SiCp/6061 Al alloy composites reinforced with different size of SiC particle (average diameter ; 0.7$\mu\textrm{m}$ and 7.0$\mu\textrm{m}$) was investigated by hardness measurement, calorimetric technique and transmission electron microscopy. At 17$0^{\circ}C$ isothermal aging treatment, the peak aging time of 0.7$\mu\textrm{m}$SiCp/6061Al alloy composite and 7.0$\mu\textrm{m}$SiCp/6061Al alloy composite is shorter than that of unreinforced 6061Al alloy, and the aging of 7.0$\mu\textrm{m}$SiCp/6061Al alloy composite is accelerated more than that of 0.7$\mu\textrm{m}$SiCp/6061Al alloy composite. This acceleration is due to the increase of dislocation density by the compositeness with SiCp and the SiC particle size. In the peak aged condition, the major strengthening phase of these materials is intermediate $\beta$ phase(Mg$_2$Si), and the activation energy for the formation of $\beta$ phase is considerably decreased by the compositeness with SiCp and the increasing of SiC Particle site.

• Korean Journal of Plant Resources
• /
• v.29 no.1
• /
• pp.143-153
• /
• 2016

Plant regeneration via organogenesis and somatic embryogenesis was investigated in Korean soybean cultivars including Cheongja 3, Jinpumkong 2, Taekwangkong and Uram. Cotyledon, cotyledon+hypocotyl and hypocotyl segments of 7-day-old seedlings were cultured on MS medium containing various concentration (0, 1, 2 and 4 ㎎/L) of BA and TDZ. The results showed that MS medium supplemented with BA 2.0 ㎎/L yielded the highest shoot formation ratio of 83.3%. In 4 cultivars, Taekwangkong showed the highest ratio of shoot formation. When various sizes of immature cotyledons (S: 1∼ 2 ㎜, M: 3∼5 ㎜, L: 6∼8 ㎜) were tested on MS medium containing 2,4-D 40 ㎎/L for somatic embryogenesis, the optimum size for embryogenic callus induction was 3∼5 ㎜ in length of immature cotyledons. In 4 cultivars, Taekwangkong showed the highest percentage of embryogenic callus induction. The results indicate that Taekwangkong is the best soybean cultivar for plant regeneration via organogenesis and embryogenic callus induction among the 4 cultivars.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.268-278
• /
• 2001

To investigate sedimentary facies and environmental changes of the Nakdong River Estuary and its adjacent coastal area, the grain size analysis and measurement of organic matter, calcium carbonate, clay mineral and metallic elements were carried out for forty surface sediment samples. Based on regional distribution pattern and characteristics of the surface sediments, sedimentary facies in the study area can be divided into sand facies (TYPE I), mud facies (TYPE II) and sand-mud mixed facies (TYPE III). TYPE III is the transition of TYPE I and TYPE II in every aspects of sediment characteristics. It suggests that TYPE III may have been formed by the mixture of two different source of sediment : one derived from Nakdong River and the other resuspended fine-grained sediments from the Jinhae Bay by winnowing action during floods or storms. Among many aspects of environmental change after the construction of the Nakdong Barrage, the most significant is the increase of sand content off the sand barrier region. It could be explained by several reasons including decreased input of fine-grained sediment from river, increased hydrodynamic energy level off the sand barrier region and artificial effects such as dredging and dumping.

• Korean journal of applied entomology
• /
• v.21 no.2 s.51
• /
• pp.61-67
• /
• 1982

The strawberry cultivar Hokowase showing rapid wilting and death around harvest time was first found in the fold at Woongcheon, Chungnam province in 1974. The fungus, Fusarium oxysporum was isolated frequently from the crown, petiole and root of strawberry plants collected from Woongcheon and was pathogenic to Hokowase. The fungus abundantly produced micro-and macro-conidia and chiamydospore on PSA. The size of micro conidia, macro conidia and Chlamydospores was $5.0\~13.0\times2.5\~3.0,\;12.8\~62.5\times2.5\times50\mu\;and\;7.5\~13.8\times5.5\~12.5\mu$, respectively. Mycelial growth of the fungus was best between $25\~30^{\circ}C$ on PSA. The disease at Woongcheon occurred from the end of March and incidence of the disease increased from the beginning of May reaching $40.2\%$ of diseased Plants at the 1st part of June. In laboratory and field evaluation tests with twelve fungicides, Difolatan, Benlate T and Tospin M showed some control effects against the disease although they did not show ignificant differences in effects compared with that of the non-treatment. The cultivar Yachiyo, Daehak 1, Line 10-2, and Senga Sengana were highly resistant, and Harunoka and Empire were moderate resistant whereas Northwest and Hokowase were highly susceptible to the fungus under field condition.

• Journal of agricultural medicine and community health
• /
• v.41 no.3
• /
• pp.129-139
• /
• 2016

Objective: The purpose of this study was to identify the predictors and frailty level in the frail elderly receiving home visiting health care services. Methods: The subjects were 177 frail elders aged over 65 registered in the home visiting health care services of three public health centers in Daegu. The data collection was performed from June 9 to June 24, 2015. This study used descriptive statistics, t-test, ANOVA, scheffe test and stepwise multiple regression by SPSS Win 18.0 program. Results: The mean of the frailty score was 10.05 (${\pm}4.52$). Age and life satisfaction were the significant factors related to the frailty score in frail elderly. Health promotion behavior, empowerment, social participation and perceived health status had a negative correlation with the frailty score. Thirty seven point four percent of the variance in the frailty score can be explained by perceived health status (${\beta}=-0.398$, p<0.001), health promotion behavior (${\beta}=-0.251$, p<0.001) and age (${\beta}=0.232$, p<0.001)(Cum $R^2=0.374$, F=25.744, p<0.001). Perceived health status was the most important factor related to the frailty score in our study. Conclusions: An integrative care program which includes these significant variables of subjects is essential to prevent the deterioration of frailty in frail elderly.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.297-305
• /
• 2009

Ores of the Jeonnam pyrophyllite province mainly consist of not only pyrophyllite but also kaolinite, and they usually contain minor amounts of muscovite and quartz. We usually call them as porcelaneous stones which usually show lower grade characteristics in the viewpoint of Korean nonmetallic industries. Mineralogical studies for the ores and their intimate formations revealed that another kind of clay minerals could have been produced from the volcanic sediments with similar ages and compositions. Corundum is commoner than the diaspore in the pyrophyllite deposits, and so diaspore can be regarded as one of temporary minerals from which corundum would be finally formed. Kaolinite deposits contain neither diaspore nor corundum, but alunites produced by an advanced argillic alteration are often observed in the upper portions of the kaolin ores. The lowest formation interbedded with pyrophyllite and/or kaolinite ores usually contain purple tuff bed on the uppermost part, and in ascending order, siliceous formation, fine ash tuff and lapillistone are found in the study areas. As ages are becoming younger, amounts of pyrophyllite and kaolinite are radically decreased, or disappeared completely. On the other hand, content of muscovite is slightly increased, and those of plagioclase feldspars and quartz are found to have been preserved from the original rocks during alteration process. Most of ore bodies show rather well bedded formations which are easily discernable in the outcrops, but more effective discremination is desirable where rather massive ores exist. Siliceous beds and purple tuff ones on the upper part of ore bodies would be useful as marker horizons or key beds which have distinct lithologies and extensions.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.45-51
• /
• 1999

The purpose of this study is to investigate the effects of various factors in keratotomy for astigmatism correction on surgical outcomes by finite element method as well as animal experiments. Three kinds of surgical techniques were mechanically investigated : arcuate, straight, and inverse arcuate keratotomy. Among the three techniques the arcuate keratotomy is the most popular one while the other two techniques are being investigated in this area. The arcuate keratotomy was found to be more controllable and effective in reducing the refractive power than the others. In arcuate keratotomy it was found most effective when the incision was located in the middle position between the apex and the edge of the cornea from the results of experiment as well as finite element study. Regarding to the range of the corneal incision in arcuate keratotomy, the incision angle of 90$^{\circ}$ was found th be most effective in reducing refractive power than other angles even it was incised up to 150$^{\circ}$. Therefore, it was concluded that 90$^{\circ}$ of incision angle results in the largest decrease in refractive power in arcuate keratotomy. However, other important findings were that the effect of the surgery decreased with time so the visco-effect of the cornea and auto-healing process. Therefore, these factors should be considered in future studies.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.305-319
• /
• 2012

The Myeongdongseongdang Cathedral, which was designated as Historic Site No. 258 in Korea, is a representative cathedral of Korean Catholic church designed by a French priest Eugene-Jean Georges Coste and completed in 1898. It is a Gothic-styled architecture constructed with bricks and stones. Lithological and mineralogical analyses determined that holy stone relics were made of marble and granite, and foundation stones are of pink feldspar granite. Deterioration mapping and ultrasonic measurement revealed main weathering and damage were exfoliation (40%) and black discoloration (37%) in the holy water basin, and exfoliation (6%) and discoloration (46%) in the exterior foundation stones. Ultrasonic velocity of the stones were calculated as 3,525m/s in the holy water basin and 2,795m/s in the exterior stones that indicated these stones were sorted into moderately to highly weathered rock. This was resulted from moisture and atmospheric pollutants around the cathedral.