• Journal of Life Science
• /
• v.7 no.2
• /
• pp.134-141
• /
• 1997

We have investigated several factors influencing adventitious shoot induction from the Populus deltodies bartr. leaf segments. To obtain in vitro materials, at first, stem segments from ex vivro were tested for axillary bud breaking on the five macronutrients levels of two differenr media. WPM was better both in bud breaking and leaf expansion than MS medium. The amount of NH$_{4}$NO$_{3}$ added in the medium did not seem to affect axillary bud breaking, significantly and subsequent shoot elongation from the stem segments of P. deltodies. However, other components in WPM might have played important roles in axillary bud breaking and shoot elongation. Regenerability from three sections (the distal, the middle and the base) of leaves cultured on WPM supplemented with TDZ and NAA combinations appeared to be different; middle and basal sections of leaves produced more organogenic sites than those of top section on WPM and those sesctions produced the highest ogranogenic sites on the same medium supplemented with 0.01 mg/l TDZ and 0.02mg.l NAA. Among 3 carbon sources tested for adventitious shoot elongation, fructose seemed to be stimulating the elongation of adventitious shoots. Sucrose and glucose added in the medium resulted in the necrosis which caused dying of adventitious shoots, eventually.

• International Area Studies Review
• /
• v.20 no.2
• /
• pp.47-62
• /
• 2016

This paper is to set up the empirical model in order to estimate industrial markup and to analyze the determinants for industrial markup by estimating the factor price elasticities of markup in the Korean manufacturing industries using the autoregressive distributed model. The import price elasticities of markup were estimated to be -1.025, -0.176, and -0.260 respectively in Machinery products, Chemical products, and Metallics which proved to have higher ratios of imported intermediate goods to industrial output. The interest elasticities of markup were also estimated to be -0.165, -0.147, and -0.210 respectively in Chemical products, Metallics, and Machinery products which are capital-intensive industries. Thus, the paper suggests that both import price index and interest rate have had more decisive effects on the changes in industrial markup in the Korean manufacturing industries, in particular, since the foreign currency crisis beginning in late 1997.

• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.133-142
• /
• 2022

The purpose of this study was to verify the moderating effect of the challenging spirit on the relationship between fun factors and re-participation intentions of participants in traditional play. The subjects of this study were 164 participants in the traditional play Hanmadang contest held in Jeju Special Self-Governing Province in 2021. They measured fun factors, challenging spirit, and re-particitation intention to participate. In order to analyze the collected measurement paper, the analysis was performed using SPSS18.0, PROCESS Macro(V.2.13), Interaction program. The major results were as follows. First, the interaction between promote health and challenge spirit was found to have a significant effect on re-particitation intention at high and medium levels. Second, it was found that the interaction between the foster of social and the challenge spirit did not have a significant effect on the re-particitation intention. Third, the interaction between sense of achievement and the challenge spirit was found to have a significant effect on the re-particitation intention at the high and medium levels.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.219-230
• /
• 1998

Various interlayer materials have been tested for active metal(Cusil ABA) brazing of Si3N4/S. S316 joint. In general multilayer joint had higher strength(80-150 MPa) and better reliability than monolayered one. The joint with Cu(0.2)/Mo(0.3)/Cu(0.2mm) interlayer showed the highest bending strength of abou 490 MPa and the joint with Cu(0.2)/Mo(0.3mm) interlayer the best reliability (14.6 Weibull modulus). The stresses distributed in joint materials during 4-point bending test were estimated by CAE von Mises analysis; the estimated stresses were In good agreement with the measured data. In multilayer joint Cu was though to reduce the residual stresses induced by the difference in thermal expansion coefficient between the ceramic Mo and metal It apperared that a Cu/Mo was optimum interlayer material for Si3N4/S. S316 joint with high bending strength (420 MPa) and reliability. In addition the various shapes and types of compound were examined by EPMA in joining interface.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.201-202
• /
• 2018

자동차 부품산업은 자동차산업의 후방산업으로 완성차 메이커 제조산업의 조립용인 중간재 산업으로 부품의 품질에 따라 완성차의 성능이 좌우된다. 자동차 산업구조상 완성차에 종속적인 사업구조로 부품사의 독자 성장이 어렵고 수익성이 완성차업체에 종속 된다. 자동차부품사의 대형화 및 생산공정 자동화 변화로 기존의 수직계열화된 부품 공급 관계에도 변화가 예상되며, 완성차업체는 통합적인 시스템 부품을 생산할 수 있는 글로벌 대형 부품업체에 의존하는 상황이 전개될 수도 있다. 이와 같은 위기와 변화를 극복하기 위해 본 연구에서는 산업구조분석을 자동차 부품산업에 적용하여 자동차부품산업의 경쟁력제고 전략을 도출하고자 한다.

• Environmental and Resource Economics Review
• /
• v.4 no.2
• /
• pp.197-221
• /
• 1995

본 논문에서는 산업연관 분석모형을 이용하여 1980년대 수출산업에서의 유가변화의 산업별 파급효과를 분석하고, 1990년대 유가 파급효과를 추정하여 보았으며, 1980년대 산업별 물가상승 요인을 계측하여 1970년대 물가상승요인과 비교분석하여 보았다. 1980년대 상반기의 유가 파급효과가 큰 산업은 석유제품과 에너지 다소비 품종인 화학, 비금속 광물, 전기가스수도, 철강, 금속 등으로 나타났으며 대부분의 산업은 유가인상율의 5% 내외의 인상효과를 나타내었다. 유가 인하기였던 1980년대 하반기에도 인하효과는 산업별로 상반기와 비교할 때 큰 차이는 없었으나, 기계, 전기, 전자통신, 자동차 등 주요 수출산업의 가격인하 효과는 그다지 크지 않은 것으로 분석되었다. 저물가 시대였던 1980년대의 주요 물가변화 요인으로는 임금 등 부가가치 및 원유가격의 변화로서 1970년대와 큰 차이가 없었으나, 중간재 수입가격, 수입계수 및 수업률 변화의 물가변화 기여도는 아주 작아서 1970년대와는 다른 양상을 보였다. 한편 1990년대의 유가파급효과 추정을 위한 모의실험 결과를 보면, 1980년대와 마찬가지로 석유관련 제품의 가격인상 효과가 두드러지겠지만, 1970년대와 1980년대에 비해서 유가파급효과는 상대적으로 낮을 것으로 추정되어 수출산업의 가격경쟁력은 임금, 기타 원자재 가격 등 여타 물가인상 요인에 더 영향을 받을 것으로 예상된다.

• 연구논문집
• /
• s.24
• /
• pp.63-79
• /
• 1994

This article reports a experimental study of the method to achieve a bond joint at lower temperature in a short time. DC magnetron sputtering of Sn, Sn/Pb, Sn/In and Sn/Cu on copper substrate was provided as an interlayer for Cu to Cu bonding under the air environment. Various examination was conducted and investigated on the effect of experimental parameters such as coating materials, coating time(or coating thickness), bonding temperature and bonding time etc. Bonding was performed at the temperature of $210^\circC-320^\circC$ for 0sec and interfacial reaction between the coated layer and copper substrate was examined using optical, scanning electron microscope and x-ray diffractometer. From the obtained results, it was found that intermetallic compounds layer consisted of $\eta-phase(Cu_6Sn_5)$ and $\beta-phase(Cu_3Sn)$ was formed at the joint interface for almost all coating materials. But the dominant phase formed in the preetched Cu substrate coated with Sn was $\beta-phase$. A characteristic morphology looks like a reaction ring, which was believed as the strong interconnecting regions between two substrates, was found to be formed on the reaction surface of copper substrates. The morphologies and compositions of the intermetallics, which depends on the regions of the reaction surface, was appeared as greatly different. Based on above results, the new bonding process to make the joint at lower temperature for short time can be admitted as a feasible process.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.5
• /
• pp.167-174
• /
• 2009

Recently, Li et al. proposed a new differential fault analysis(DFA) attack on the block cipher ARIA using about 45 ciphertexts. In this paper, we apply their DFA skill on AES and improve attack method and its analysis. The basic idea of our DFA method is that we recover intermediate ciphertexts in last round using final faulty ciphertexts and find out last round secret key. In addition, we present detail DFA procedure on AES and analysis of complexity. Furthermore computer simulation result shows that we can recover its 128-bit secret key by introducing a correct ciphertext and 2 faulty ciphertexts.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.77-77
• /
• 2020

2019년 12월 발병한 코로나19(COVID-19)는 높은 전파력을 바탕으로 세계적으로 대유행하면서 사람들의 생명, 건강을 비롯하여 생산·소비활동까지 위협하고 있다. 코로나19는 치료제 개발 전까지 실물경제에 직접적으로 타격을 주면서 국내외 경제 전반에 악영향을 지속적으로 미칠 것으로 예상된다. 특히 외부활동 및 소비심리 위축으로 숙박, 음식, 관광, 문화, 여행 등의 대면서비스 업종의 심각한 매출 감소 및 고용악화가 발생하고 있으며, 이 외 대부분의 산업에서도 생산과 소비활동이 위축되고 있다. 이러한 소비·생산활동의 위축은 각 산업에 필요한 중간재 수요, 특히 필수재인 물이용에도 영향을 미치게 된다. 이에 본 연구에서는 코로나19 확산으로 소비가 감소할 경우 전산업과 물산업에 미치는 경제적 손실을 1년간의 모든 실물거래 관계를 행렬로 기록한 통계표인 산업연관표(input-output table)을 활용하여 분석해보았다. 이를 위해 전월대비 3월 소비자심리지수 하락 폭을 참고하여 소비 감소에 따른 시나리오 분석을 산업연관분석을 통해 실시하다. 분석결과, 5개월 동안 소비가 20% 감소하는 경우 전산업과 물산업에서 각각 48.3조원과 886억원의 생산감소가 발생하며, 부가가치는 각각 21.7조원과 451억원이 감소하는 것으로 분석되었다.

• Korea Trade Review
• /
• v.46 no.4
• /
• pp.205-217
• /
• 2021

This paper examines the effects of intellectual property protection policies on upstream firms' R&D investments in order to derive policy implications in relation to the fostering of the intermediate goods industry. To that end, the dependence on import of intermediate goods and the degree of protection of intellectual property rights are introduced into the model to analyze the effects of R&D investments on the dependence on imports and the effects of intellectual property rights protection policies on the level of R&D investments in order and the social welfare effects are also checked. The policy implications derived in this paper, which used an oligopolistic market model with a vertical specialization structure, are as follows. As R&D investments expand, upstream firm begins to have price competitiveness, the dependence on import of intermediate goods by downstream firm decreases, and social welfare increases. That is, in order to strengthen the independence of the intermediate goods industry, R&D investments by upstream firm should be expanded, and to promote this, the government should strengthen the protection of intellectual property rights.