• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.369-374
• /
• 2021

Apartment recently built in kitchen is made is made because the gas hose with built-in ways invisible inside the sink. In this case, if the gas leaks, it is a dangerous method that can accumulate inside the sink and lead to an explosion. In this study, since the hose connected between the gas range and the intermediate valve is inside the sink, it is not possible to test for gas leaks, so a valve system that can easily check for gas leaks using a pressure sensor was studied. As for the pressure measurement method, the pressure of the hose connecting the intermediate valve and the gas range was measured so that data could be collected and analyzed using the I2C communication method. In addition, the calculation of the gas pressure supplied to the home was investigated for the atmospheric pressure error for the value calculated by adding the average value of the gas gauge pressure of 22.46 mbar at the inlet of the gas meter to the atmospheric pressure. A valve system was developed to detect minute gas leaks.

• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.207-211
• /
• 1994

전체 압력을 변화시키면서 다이아몬드박막을 n형 Si(100) 기판 위에 마이크로 웨이브 화학기상 증착법으로 증착하였다. 높은 압력으로 (225 torr)증착된 박막은 낮은 압력(60 torr)의 박막보다 다이아몬 드 순수도가 향상되었으며 표면도 매끈한 {100}형상이 우세하였다. 다이아몬드 박막의 성장양식을 알아 보기 위하여 낮은 압력(600torr)과 높은 압력(225 torr)에서 증착된 박막의 미세구조를 투과전자현미경으 로 각각 분석하였다. 전체압력이 낮은 경우 박막과 기판의계면에는 a-SiC의 중간층이 형성되어 있는 것 을 확인하였으며 전체압력이 높은 경우의 박막은 evolutionary selection rule에 따라 성장하는 것으로 추론되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5211-5217
• /
• 2012

This study was to evaluate the effects of foot strengthening exercise to improve hallux valgus in young of hallux valgus with flexible flatfoot. Subjects 28 people were randomly divided by the foot strength group(n=14) and control group(n=14). In a period of 8 weeks, they put on I.D.W. Experimental group took foot strengthening exercise for 20 minutes 3 times a week during 8 weeks. Foot structure and max pressure were evaluated by hallux angle, 1~2 metatarsal angle, navicular height, 1st phalange, 2~5phalange, 1st metatarsal, 2nd metatarsal, 3rd metatarsal, 4th metatarsal, 5th metatarsal, mid foot, medial hind foot, lateral hind foot. There were significantly increased by exercise group in outcomes of the structural and plantar foot pressure from hallux angle, 1~2 metatarsal angle, 1st phalange, 1st metatarsal, 2nd metatarsal, 3rd metatarsal, mid foot. The result suggest that foot strengthening exercise is feasible and suitable for individuals with hallux valgus with flexible flatfoot.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1997

We show that the usage of the cyclic pressure function in the freeze drying is more effective than the drying rate of the constant pressure process. The ultimate object of this process is to reduce energy costs by shortening the drying time. In this work, the concept of cyclic pressure function to decrease the drying time and the effects of the following factors on drying rate are considered ; pulse type, size in amplitude of pressure, size of intermediate time. Temperature for drying has always been maintained constantly at $20^{\circ}C$ and the pulse type could have found to give useful results than the constant pressure by altering chamber pressure from low pressure to high pressure Also, when the amplitude of the pulse is 0.4 torr and the intermediate time is six hour the drying rate was increased considerably.

• Clinical and Experimental Pediatrics
• /
• v.48 no.12
• /
• pp.1362-1369
• /
• 2005

Purpose : This study aimed to investigate the correlation between the plasma level of N-terminal pro-B-type natriuretic peptide(pro-BNP) and several known risk factors influencing outcomes after Fontan operations, and to assess whether pro-BNP levels can be used as predictive risk factors in Fontan operations. Methods : Plasma pro-BNP concentrations were measured in 35 patients with complex cardiac anomalies before catheterization. Cardiac catheterization was performed in all subjects. Mean right atrium pressure, mean pulmonary artery pressure(PAP), and ventricular end-diastolic pressure(EDP) were obtained. Cardiac output and pulmonary vascular resistance were calculated by Fick method. Results : Plasma pro-BNP levels exhibited statistically significant positive correlations with mean PAP(r=0.70, P<0.001), pulmonary vascular resistance(r=0.57, P<0.001), RVEDP(r=0.63, P<0.001), LVEDP(r=0.74, P<0.001), and cardiothoracic ratio(r=0.71, P<0.001). The area under the ROC curve using pro-BNP level to differentiate risk groups in Fontan operations was high : 0.868(95 percent CI, 0.712-1.023, P<0.01). The cutoff value of pro-BNP concentrations for the detection of risk groups in Fontan operations was determined to be 332.4 pg/mL(sensitivity 83.3 percent, specificity 82.7 percent). Conclusion : These data suggest that plasma pro-BNP levels may be used as a predictive risk factor in Fontan operations, and as a guide to determine the mode of therapy during follow-up after Fontan operations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.86-93
• /
• 1999

Turbocharger has been used to increase the performance of diesel engine, especially ship engine , for years. Recently, the turbocharger is being adopted not only for an agricultural engine but also for an automobile engine. To improve the performance of diesel engine , the problem of the reduction of A/F ratio in high speed should be solved. Turbocharger is well known for its cost effectiveness, reliability and duration . In this study, an experiment was conducted to verify simulation program . The results for natural aspiration engine and turbocharged engine were compared. In order to estimate the characteristics of exhaust gas, D-13 mode was selected. Power, torque and BSFC of turbocharged engine were increased than those of natural aspiration engine by about 48%, 46% and 5%, respectively . The components in exhaust gas except NOx from turbocharger engine were less than the amount set up for 2000-year regulation.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.240-243
• /
• 2004

Bias인가된 Hot filament CVD방법을 이용해 Ni을 RF sputtering법으로 고속도강에 피복하여 중간층으로 한후 다이아몬드 박막을 피복할 때 기판온도. Bias인가효과 및 계면층의 특성을 조사하였다. 증착시 Bias인가 할 경우 필라멘트에서 전자방출이 촉진되어 다이아몬드 핵생성과 성장을 촉진하였으며 본 실험에서 최적조건은 증착압력 20~40 torr, Bias인가전압 200V, 기판온도 $700^{\circ}C$로 나타났으며 강에의 다이아몬드 박막 형성시 Ni은 중간층으로써 적합한 원소로 나타났다.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.28-41
• /
• 2019

We carried out performance analysis of Sodium-Water Reaction Pressure Relief System of Prototype Generation-IV Sodium-Cooled Fast Reactor. We analyzed transient-dynamic behavior of fluids inside the steam generator to vent into a sodium dump tank or a water dump tank when tubes in the steam generator were broken to cause a large-water-leak accident. Accordingly, we preliminarily evaluated design requirements of our system. Our results showed that sodium in the shell side of the steam generator and in Intermediate Heat Transport System was completely vented within 50 s and feed water in the tube side of the steam generator was completely vented within 2.5 s. It was analyzed that pressure of the tube side of the steam generator was higher than pressure of the shell side of the steam generator, which showed that sodium in the shell side did not flow into the tube side. Our results are expected to be used as basis information to performance analysis of Sodium-Water Reaction Pressure Relief System of Prototype Generation-IV Sodium-Cooled Fast Reactor.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1241-1242
• /
• 2015

이 연구는 정전용량형 압력센서 내의 공기가 센서 성능에 미치는 영향을 줄이고자 이론적 접근과 실험적 확인을 통해 제안된 바 있는 센서 모델을, 유한요소해석 프로그램인 ANSYS로 각각의 조건에 따라 해석하여 기존에 제시 된 결과들과 비교하는 과정을 다루었다. FEA(Finite Element Analysis)결과, air chamber를 추가한 센서는 기존의 센서보다 sensitivity가 향상되었음을 확인할 수 있었다. 또한, FEA로 얻은 sensitivity 값은 이론값과 1.8%~10.1%의 차이를 보였으며, sensitivity ratio는 이론값과 실험값의 중간 정도로 나타났다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.107-114
• /
• 2019

In many military aircraft, s-shaped diffusers are used to prevent the fan blades of the turbofan engine from being exposed to the outside. The inlet configurations of the air intakes for military aircraft vary, such as the rectangular intake of the F-22, the crescent-like intake of the F-16, elliptical intake of the MQ-25. In this study, the aerodynamic performance of s-shaped diffusers with various inlet configurations was evaluated using numerical analysis. In addition, the configuration of the middle section of an s-shape duct was changed to the crescent shape, and the effects on its aerodynamic performance were investigated. As a result, there was a slight difference in total pressure recovery according to various inlet configurations with ellipse-shaped middle sections. Also, the total pressure distortion was the lowest in the rectangular inlet shape. When the configuration of the middle section was changed from an ellipse to a crescent shape, the total pressure recovery remained at a high level, except for the ellipse-shaped inlet configuration. In terms of total pressure distortion, the duct with the crescent-shaped middle section showed a significantly more uniform pressure distribution than that with the ellipse-shaped middle section.