• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.658-663
• /
• 2001

In this study, the axial-compressor design and performance/flow analysis program is developed. A mean-line analysis was used to determine optimum arrangement of overall geometry and its off-design performance is predicted by stage-stacking method. Three dimensional blade shape is generated using radial equilibrium equation and vortex methods. Various blade shape is generated and their performance is compared. Finally the quasi-three dimensional flow analysis is applied to investigate the detailed flow phenomena.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.7
• /
• pp.916-923
• /
• 2000

Numerical study of three-dimensional turbulent flow in a forward curved centrifugal fan is presented. Standard $k-{\varepsilon}$ turbulence model and non-orthogonal curvilinear coordinates arc used to consider the turbulent flow field and complex geometry. Finite Volume approach is adopted for discretization scheme and structured grid system is used to help convergence. Multiblock grid system is used for flow field and divided into five domains that are inlet, outlet, impeller, tip clearance and scroll. It is assumed that the flow field is steady and incompressible. These numerical results are compared with the experimental data inside a rotor and at the fan outlet. Most important flow features are captured through this numerical approach. Finally details of flow field inside a fan are described and analyzed.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.83-93
• /
• 1995

A numerical and experimental investigation on the flow characteristics in the rectangular duct of an MHD propulsion system has been carried out. In numerical analysis, three-dimensional, steady-state, viscous, incompressible electrically conducting fluid flow under the influence of uniformly applied magnetic and electric fields was treated using a finite-difference technique. It was found from the numerical study that when the Lorentz force is weak, the typical parabolic velocity profile under a laminar flow condition changes to an M shaped profile near the electrode region and that the pressure increases linearly from the inlet toward the outlet of the MHD duct under constant electro-magnetic field. In experiment, thrust of the MHD propulsion system can be controlled easily by varying electrode current. The measured pressure gradient along the MHD duct is proportional to the Lorentz force, which is in agreement with the numerical results.

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.27-34
• /
• 2015

In this study, preconditioned adjoint equations for the quasi one-dimensional Euler equations are developed, and their computational benefit at all speed is assessed numerically. The preconditioned adjoint equations are derived without any assumptions on the preconditioning matrix. The dissipation for Roe type numerical flux is also suggested to scale the dissipation term properly at low Mach numbers as well as at high Mach numbers. The new preconditioned method is validated against analytical solutions. The convergence characteristics over wide range of Mach numbers is evaluated. Finally, several inverse designs for the nozzle are conducted and the applicability of the method is demonstrated.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.689-690
• /
• 2008

In the present study, a micro holographic PTV (HPTV) system was used to experimentally investigate the structure of 3D flow within a curved micro-tube with varying Dean number. The employed HPTV system incorporated a high-speed digital camera to measure the temporal evolution of the 3D velocity fields of micro-scale fluid flows. With increasing Dean number, flow in the curved tube is transformed from a steady flow to a secondary flow with two counter-rotating vortices. In this study, to analyze the 3D flow characteristics in the curved section of tube at a high Dean number, the trajectories of fluid particles were obtained experimentally using the whole 3D velocity field data obtained by the micro HPTV technique. The mean velocity field distribution was then obtained by ensemble averaging the instantaneous velocity fields. These results would be helpful in the design of various passages within micro-scale devices or micro-chips and in understanding the mixing phenomena that occur in curved conduits along the trajectories of fluid particles.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.479-486
• /
• 2016

The efficient steam drum should be required to reduce carbon oxide emissions and heat recovery in oxygen converter hood system. However, steam generation is limited to the time of the oxygen blowing period, which is intermittent or cyclical in operation of steel-making process. Thus, steam drum should be optimized for an effective steam generation during the oxygen blowing portion of the converter cycle. In this study, a three-dimensional computational fluid dynamics (CFD) model has been developed to describe the impacts of changing various operating conditions and geometric shape on thermo-fluid characteristics and performance of the steam drum. This model encompasses not only fluid flow and heat transfer but also evaporation and condensation at the interfacial surface in the steam drum by using VOF (Volume of Fluid) method. To validate the prediction performance of this model, comparison of the steam flow rate between numerical and experimental result has been performed, resulting in the accuracy of the relative error by less than 3.2%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.67-67
• /
• 2021

하구에서의 흐름은 하천의 담수와 바다에서부터 유입되는 염수, 조석, 파랑 등으로 인해 복잡한 흐름구조와 혼합 양상을 보인다. 특히 만 내에 하천이 있을 경우 만의 해류특성은 하구에서의 혼합과 이송에 지배적인 영향을 미치며, 하천에서부터 방류되는 입자들은 만의 해류특성 따라 만에서의 체류시간과 이송이 결정된다. 잔차류 특성에 의한 순 물질 플럭스의 방향과 조석비대칭에 따른 하구에서의 퇴적 형태들이 결정되며, 이로 인해 하구에서의 퇴적물 퇴적 및 물질의 집적 위치, 하구 인근과 만에서의 환경변화에 영향을 줄 수 있다. 따라서 만 내에서의 혼합과 입자의 이송확산, 하천 담수의 영향역 등과 같은 만과 하천의 흐름 특성을 이해하는 것은 연안 및 하구의 환경 및 관리에 중요하다. 본 연구에서는 영일만과 형산강을 대상으로 계절변화에 따른 영일만 내 흐름과 형산강 하구에서의 퇴적양상에 대해 수치모의를 통해 수행하였다. 수치모델로는 천수방정식으로 준 3차원 유동해석을 하는 Delft-3D Flow와 파랑모형인 SWAN 모델을 결합하여 형산강 하구와 영일만의 유동을 해석하였다. 상류개방경계는 형산강하구 9 km, 하류개방경계는 영일만 외해 50 km로 설정하였고, 경계조건은 대상지역의 관측소 자료와 전지구 모형자료를 결합하여 구성하였다. 또한, 라그랑쥬 입자추적모델을 통해 형산강 상류에서 유입한 입자들의 영일만 내 체류 시간과 집적 위치를 평가하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.231-231
• /
• 2022

하구에서의 흐름은 하천의 담수와 바다에서부터 유입되는 염수, 조석, 파랑 등으로 인해 복잡한 흐름구조와 혼합 양상을 보인다. 특히 만 내에 하천이 있을 경우 만의 해류특성은 하구에서의 혼합과 이송에 지배적인 영향을 미치며, 하천에서부터 방류되는 입자들은 만의 해류특성 따라 만에서의 체류시간과 이송이 결정된다. 잔차류 특성에 의한 순 물질 플럭스의 방향과 조석비대칭에 따른 하구에서의 퇴적 형태들이 결정되며, 이로 인해 하구에서의 퇴적물 퇴적 및 물질의 집적 위치, 하구 인근과 만에서의 환경변화에 영향을 줄 수 있다. 따라서 만 내에서의 혼합과 입자의 이송확산, 하천 담수의 영향역 등과 같은 만과 하천의 흐름 특성을 이해하는 것은 연안 및 하구의 환경 및 관리에 중요하다. 본 연구에서는 영일만과 형산강을 대상으로 계절변화에 따른 영일만 내 흐름과 형산강 하구에서의 퇴적양상에 대해 수치모의를 통해 수행하였다. 수치모델로는 천수방정식으로 준 3차원 유동해석을 하는 Delft-3D Flow와 파랑모형인 SWAN 모델을 결합하여 형산강하구와 영일만의 유동을 해석하였다. 상류개방경계는 형산강하구 9 km, 하류개방경계는 영일만 외해 50 km로 설정하였고, 경계조건은 대상지역의 관측소 자료와 전지구 모형자료를 결합하여 구성하였다. 또한, 라그랑쥬 입자추적모델을 통해 형산강 상류에서 유입한 입자들의 영일만 내 체류시간과 집적 위치를 평가하였다.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.303-308
• /
• 2001

A rotating blade of steam turbines is designed using blade design system. To minimize the design time. quasi three dimensional flow analysis code is adopted to calculate blade section. The blade section lies on a streamline determined by previous steam turbine design procedures. The blade design system makes a transform of streamline coordinates, (m, r$\theta$), to (m', $\theta$) coordinates and all design procedure except 3 dimensional stack-up is performed in the coordinates. Each designed blade section is stacked-up and whole 3 dimensional blade can be modified by correcting 2D section, repeatly. The full 3D numerial analysis for the one stage including designed rotating blade will be performed later

• The KSFM Journal of Fluid Machinery
• /
• v.4 no.3 s.12
• /
• pp.14-20
• /
• 2001

Numerical analysis of the three dimensional turbulent flow field in a complex valve trim is carried out to confirm the possibility whether this simulation tool can be used as a design tool or not. The simulation of the incompressible flow in a glove valve is performed by using the commercial code. CFD-ACEA utilizes the finite volume approach as a discretization scheme, and the pressure-velocity coupling is made from SIMPLEC algorithm in it. Four flow cases of the control valve are investigated, and the valve flow coefficient for each case is compared with the experimental data. Simulation results show a good agreement with the experiments, and it is observed that the cavitation model improves the simulation results.