• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2541-2548
• /
• 2010

This paper describes the calculation for characteristic impedance of transmission line with periodic structures such as defected ground structure (DGS) and photonic bandgap (PBG). The previous method which uses the ${\lambda}$/4 transmission line model is reviewed and its disadvantage that the calculated characteristic impedance is strongly dependent on the frequency is discussed. The characteristic impedance of transmission lines with periodic structures are calculated using the ${\lambda}$/4 transmission line model and analytic method. The calculated characteristic impedance by the latter method is an almost constant value while that from the first method depends on the frequency strongly. In addition, the characteristic impedance of the transmission line with PBG is calculated and proposed, while it has been rarely studied ever. S-parameters are obtained from the measurement using the fabricated sample as well as simulation, and used for calculating the characteristic impedances and comparison. The characteristic impedances calculated from the measured S-parameters agree well with the simulated results. It is well described that the analytic method to calculate the characteristic impedance of transmission lines on uniform dielectric structures can be applied successfully to the transmission lines with periodic structures such as DGS and PBG.

• The Korean Journal of Applied Statistics
• /
• v.28 no.3
• /
• pp.467-475
• /
• 2015

Accurate demand forecasting is a crucial component in revenue management(RM). The booking data of departed flights is used to forecast the demand for future departing flights; however, some booking requests that were denied were omitted in the departed flights data. Denied booking requests can be interpreted as censored in statistics. Thus, unconstraining demand is an important issue to forecast the true demands of future flights. Several unconstraining methods have been introduced and a method based on expectation maximization is considered superior. In this study, we propose a new unconstraining method based on a regression model that can entertain such censored data. Through a simulation study, the performance of the proposed method was evaluated with two representative unconstraining methods widely used in RM.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.290-297
• /
• 2009

A two-phase (gas and liquid) flow analysis solver, named CUPID, has been developed for a realistic simulation of transient two-phase flows in light water nuclear reactor components. In the CUPID solver, a two-fluid three-field model is adopted and the governing equations are solved on unstructured grids for flow analyses in complicated geometries. For the numerical solution scheme, the semi-implicit method of the RELAP5 code, which has been proved to be very stable and accurate for most practical applications of nuclear thermal hydraulics, was used with some modifications for an application to unstructured non-staggered grids. This paper is concerned with the effects of interpolation schemes on the simulation of two-phase flows. In order to stabilize a numerical solution and assure a high numerical accuracy, the second-order upwind scheme is implemented into the CUPID code in the present paper. Some numerical tests have been performed with the implemented scheme and the comparison results between the second-order and first-order upwind schemes are introduced in the present paper. The comparison results among the two interpolation schemes and either the exact solutions or the mesh convergence studies showed the reduced numerical diffusion with the second order scheme.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.370-370
• /
• 2021

태풍으로 인한 피해를 줄이기 위해 경로, 강도 및 폭풍해일의 사전 예측은 매우 중요하다. 이중, 태풍의 경로와는 달리 강도 및 폭풍해일의 예측에 있어서 바람장은 수치 모델의 초기 입력값으로 요구되기 때문에 정확한 바람장 정보는 필수적이다. 대기 바람장 예측 방법은 크게 해석적 모델링, 라디오존데 측정과 위성 사진을 통한 산출로 구분할 수 있다. Holland의 해석적 모델링은 비교적 적은 입력값이 필요하지만 정확도가 낮고, 라디오존데 측정은 정확도가 높지만 점 측정에 가깝기 때문에 이차원 바람장을 산출하기에 한계가 있다. 위성 사진을 통한 바람장 산출은 위성기술의 고도화로 관측 채널 수 및 시공간 해상도가 크게 증가하고 있기 때문에 다양한 기법들이 개발되고 있다. 본 연구에서는 생성적 적대 신경망 (Generative Adversarial Network, GAN)을 통해 일련의 연속된 과거 적외 채널 위성 사진 흐름의 패턴을 학습시켜 미래 위성 사진을 예측하고, 예측된 연속적인 위성 사진들의 교차상관 (cross-correlation)을 통해 바람장을 산출하였다. GAN을 적용함에 있어 2011년부터 2019년까지 한반도 근방에 접근했던 태풍 중에 4등급 이상인 68개의 태풍의 한 시간 간격으로 촬영된 총 15,683개의 위성 사진을 학습시켜 생성된 이미지들은 실측 위성 사진들과 매우 유사한 것으로 나타났다. 또한, 생성된 이미지들의 교차상관으로 얻어진 바람장 벡터들의 풍향, 풍속, 벡터 일관성 및 수치 모델과의 비교를 통해 각각의 벡터들의 품질 계수를 구하고 정확도가 높은 벡터들만 결과에 포함하였다. 마지막으로 국내 6개의 라디오존데 관측점에서의 실측 벡터와의 비교를 통해 본 연구 결과의 실효성을 검증하였다. 본 연구에서 확장하여, 이와 같이 AI 기법과 이미지 교차상관 기법을 사용하여 얻어진 바람장으로부터 태풍 강도예측에 필요한 요소인 태풍의 눈의 위치, 최고 속도와 태풍 반경을 직접적으로 산출할 수 있고. 이러한 위성 사진을 기반으로 한 바람장은 단순화된 해석적 바람장을 대체하여 폭풍 해일 모델링의 예측 성능 개선에 기여할 것으로 보여진다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.1
• /
• pp.3-12
• /
• 2006

The purpose of this study is to describe the Non-Destructive Testing(NDT) of the rockbolt and investigate the applicability of the NDT methods to estimate the integrity of the rockbolt. To examine the rockbolt integrity including rockbolt itself and grouting material, two methods are adopted: numerical and experimental methods. In the numerical method, the numerical code DISPERSE is used to analyze the dispersion of the rockbolt. The dispersion curve shows the effects of the thickness and stiffness of grouted materials on the embedded rockbolt. Therefore, the optimal frequency for the integrity test of the rockbolt is obtained: 20~120kHz in L(1,0) mode. In the experimental methods, destructive and non-destructive tests are carried out in a laboratory. In the non-destructive test, the low frequency mode generated by an impact and t he high frequency mode generated by an ultrasonic transducer seem to characterize the rockbolt condition readily. The experimental results show that the guided waves attenuate more significantly when the stiffness of the grouted material increases and/or the zone of the defect increases. Meanwhile, the ultimate capacity of rockbolt was evaluated through the pull-out tests and is compared to the NDT results. This study demonstrates that the NDT is a valuable tool for the rockbolt integrity evaluation.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.83-93
• /
• 1995

A numerical and experimental investigation on the flow characteristics in the rectangular duct of an MHD propulsion system has been carried out. In numerical analysis, three-dimensional, steady-state, viscous, incompressible electrically conducting fluid flow under the influence of uniformly applied magnetic and electric fields was treated using a finite-difference technique. It was found from the numerical study that when the Lorentz force is weak, the typical parabolic velocity profile under a laminar flow condition changes to an M shaped profile near the electrode region and that the pressure increases linearly from the inlet toward the outlet of the MHD duct under constant electro-magnetic field. In experiment, thrust of the MHD propulsion system can be controlled easily by varying electrode current. The measured pressure gradient along the MHD duct is proportional to the Lorentz force, which is in agreement with the numerical results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.174-174
• /
• 2018

현재 우리나라에서는 지속적으로 홍수 및 가뭄에 대한 예방사업을 진행하고 있음에도 불구하고 해마다 피해가 발생하고 있으며, 이에 따라 효율적인 이수 치수 계획이 절실히 필요한 실정이다. 하지만 우리나라의 경우, 강우의 발생 특성이 과거와는 다른 양상을 보이고 있다. 따라서 강우빈도해석 시 강우특성이 변화하지 않는다는 정상성(stationary)을 가정하는 기존의 방법론은 문제가 있다. 이에 본 연구에서는 강우특성이 어떻게 변화하였는지 평가하는 방법론에 대하여 고찰하고자 한다. 우선, 대상 강우관측소의 과거 일강수량 자료를 수집하고 연도별 강우발생 천이확률(Markov Chain)과 강우량 확률분포(Gamma)의 매개변수를 산정한다. 그리고 일강우시계열의 경향성 분석(Mann-Kendall test) 결과와 함께 비교 검토하여 어떠한 방법론이 강우특성 변화를 더욱 잘 추정하는지에 대하여 평가한다. 본 연구를 통하여 우리나라 강우특성의 변화를 더욱 정확하게 추정할 수 있는 기틀을 마련할 수 있을 것이며, 향후 비정상성 기반의 기후변화 모의를 수행하기 위한 기초연구로 활용될 수 있을 것으로 기대된다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.2
• /
• pp.49-57
• /
• 1997

It is necessary to conduct researches about seismic design and analysis to protect various structures from earthquakes which are one of the most destructive natural disaster to human civilization. To assess the seismic capacity of structure, not only analytical but also experimental researches are important. Currently, pseudodynamic test known as computer-actuator on-line test is one of the available test methods to assess seismic capacity of structure without using shaking table. In this paper seismic capacity of simple one-degree of freedom structure was estimated by pseudodynamic test. Good agreement between the experimental and analytical results was obtained. Better results would be obtained when more sophisticated measuring and controlling instruments are available.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.6 s.79
• /
• pp.717-726
• /
• 2005

This study investigates the bearing pressure distribution and design of an H-section steel column baseplate under concentric loading. In general, the size and thickness of the baseplate are determined with the assumption that the bearing pressure of the column baseplate is distributed uniformly. When the column is loaded lightly, however, the baseplate becomes smaller andthinner and the bearing pressure of the baseplate is distributed non-uniformly. In this study, the distribution of the bearing pressure is investigated using the experimental method and the analytical method. Seven specimens of the H-section steel column baseplate were fabricated and tested. The analysis of the specimens was performed using the finite element analysis program, ANSYS. It is not appropriate to use the Limit State Design,which assumes that the bearing pressure of the baseplate is distributed uniformly,because the bearing pressure is distributed non-uniformly and is concentrated under the column sectio.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3A
• /
• pp.383-390
• /
• 2008

A Precast Prefabricated Bridge Column using steel tube and prestressing bar was proposed for the application of precast method on substructure. A column specimen designed by the proposed bridge column system was made and performed a quasi-static test. The failure mode appeared to be a flexural failure and there is no damage on column segment connection. And it is good use of the self-centering ability by prestressing force. Test results showed that a column specimen satisfy the earthquake specification, and the structural stability was verified. Nonlinear finite element analysis was performed and compared with the test results. Force-displacement relation and location of crack from the analysis results were compared with the test results and it agreed well. The quantitative analysis was also performed by a parametric study using this modeling technique.