• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.190-194
• /
• 2013

In this study, sebacic acid made from castor oil was used as monomer with isophthalic acid and glycols for polyester polyol synthesis. Polyurethane adhesive was synthesized from the various polyester polyol. From the result of adhesion strength test, polyester polyol made from sebacic acid showed better adhesive force than that of adipic acid due to higher cohesive energy. Branched glycol containing methyl group represented better adhesion than linear glycol. In the chain extender, adhesion strength increased going from PG, EG, BD. From the measurement of TGA, BD showed the best heat stability, and followed by PG, EG. Glass transition temperature increased in the order PG, EG, BD by the result of DMA.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.225-231
• /
• 2014

In this study, we used polypropylene grafted with itaconic acid (PP-g-IA) as a compatibilizer to prevent phase separation phenomenon which occurs upon blending polypropylene (PP) and ethylene-vinyl alcohol copolymer (EVOH). A compatibilizer was prepared using graft copolymerization of itaconic acid (IA) onto PP where input ratio of IA was 1, 2, 5, and 10 wt.%. To confirm the structure of PP-g-IA and the graft ratio of IA onto PP, we used $^1H$ NMR and FT-IR. We tested the compatibilizer which has highest graft ratio of 1% in immiscible PP/EVOH blends. The morphologies of PP/PP-g-IA/EVOH blends were analyzed by SEM. Thermal and mechanical properties of the blends were analyzed by DSC and UTM. PP-g-IA enhanced the interfacial adhesion of PP and EVOH copolymer.

• Elastomers and Composites
• /
• v.58 no.3
• /
• pp.121-127
• /
• 2023

The effect of diisocyanate type on the decomposition temperature of polyurethane (PU) hydrolysis was investigated in a subcritical water medium up to 250℃. PU samples were prepared using different types of diisocyanate: two aromatic diisocyanates (4,4'-methylene diphenyl diisocyanate (MDI) and methyl phenylene diisocyanate (TDI)), one unbranched aliphatic diisocyanate (hexamethylene diisocyanate (HDI)), and two cyclic aliphatic diisocyanates (4,4'-methylene dicyclohexyl diisocyanate (H₁₂MDI) and isophorone diisocyanate (IPDI)). The pressure had no effect on hydrolysis in the range of 70-250 bar. The decomposition temperature of the PU samples increased in the following order: TDI-PU (199℃) < H₁₂MDI ≈ IPDI ≈ HDI (218-220℃) < MDI-PU (237℃). This order of increase in temperature is related to the electron-donating ability of the group to connected to the nitrogen of the urethane unit. When the temperature of the (PU + water) mixture reached the specific decomposition temperature, the PU samples hydrolyzed completely within 5 min into primary amine and 1,4-butanediol. The hydrolysis products from MDI-PU and H₁₂MDI-PU were separated into a liquid phase rich in (BD + water) and a solid low phase rich in amine, whereas the products from TDI-, IPDI-, and HDI-PU existed in a single aqueous phase.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.61-66
• /
• 2013

A family of Cr(III) complexes supported on tridentate dibenzimidazolyl ligands having a general formula: $[N(CH_3)(CH_2)_2(Bm-R)_2]CrCl_3$ [where Bm = benzimidazolyl, R = H (3a); -Me(3b); -Bn (3c)] have been synthesized and utilized them for the trans-1,4-specific polymerizations of 1,3-butadiene (BD), activated with methylalumoxane (MAO). The activity of BD polymerizations was sensitive to the type of ligand on the Cr metal, so that the activity decreases in the order of 3a > 3c > 3b. All the catalysts combined with MAO yielded polybutadienes with perfect trans-1,4 structure with moderate molecular weight.