• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.11
• /
• pp.27-35
• /
• 1995

The fluid coupling combined with a pump and a turbine have many merits compared with other couplings, their uses are increesing rapidly in various industrial fields at home and abroad in pursuit of high-speed more efficiency durability of various mechanic devices. The authorities concerned have recognized the improtance of the fluid coupling and supported its developement and now some trial products began to show up. As the structrue and characteristics of the fluid coupling have little similarity to other kinds of couplings and its fluid behavior is unique, so its characteristic analysis is expected to be difficult. Until now no satisfactory study on the characteristics of the fluid coupling seems to have been conducted at home, so a study on this field needs to be done urgently. The purpose of this research is to construct the experimental test set-ups and establish a series of performance test program for the domestically developed fluid couplings and to provide a software to store and utilize these experimental data which can be used to improve the performance of the fluid coupling and solve on the job problems confronted in operation. The performance test consists of taking measurment of torque, rpm and efficiency of the fluid coupling for three different amount of working fluid inside with various loads to the output shaft and finally infestigating the torque, rpm and efficiency characteristics of the fluid coupling with respect to these parameters. The results of this study can contribute valuable references to the development of variable speed fluid coupling and torque converter currently pursued by the domestic industry.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.91-93
• /
• 1991

DARBS는 저널베어링 및 구름베어링에 지지되어 있는 회전체-베어링계에 대한 동력학적 해석을 수행하는 프로그램이다. 해석에는 유한요소법(finite element method)을 이용하며 선회속도(whirl speed), 모우드 형성(mode shape), 임계속도(ciritical speed) 그리고 비동기 가진응답(asynchronous response)등에 대한 해석결과를 제공한다. 본 프로그램의 주된 특징은 람다 행렬(lambda matrices)의 개념을 도입하여 비동기 가진응답의 해석에 적용하 고, 베어링 상수와 자이로 효과와 같은 회전속도 의존성에 대하여 체계적인 접근방법을 사용했다는 점이다. 본 프로그램은 IBM PC 및 호환 기종에 적 합하도록 개발되었으며 기본적인 출력장치를 지원하는 S/W가 포함되어 있 다. 또한 대화식 데이타 입력과 메뉴처리방식을 채택하여 사용하기 편리하게 하였으며, 오류발생시 메세지가 나타나 오류수정을 용이하게 하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.04a
• /
• pp.59-62
• /
• 1993

고품위의 동력전달 장치와 같은 고정밀 기능 부품들은 보다 높은 비강도, 고경도, 내마모성 및 내식성을 가져야 하며, 특히 소재의 마찰, 마모 특성은 기아제품 등의 수명, 정밀도 및 에너지 손실을 좌우하는 것으로서 물성의 열화를 극복할 수 있는 소재의 개발이 요구되고 있다. 지난 수년동안 금속기지에 $Al_2O_3$나 SiC등의 보강재를 첨가하여 복합재의 응착 및 연삭마모에 대한 저항성을 향상시키는 시도를 하고 있다. 주로 제조비용이 낮고 거의 등방적인 성질을 가지며 가공성이 좋은 입자 보강 복합재료에 대한 연구가 지배적이었지만, 입자 보강 복합재료의 경우 강도 및 탄성계수의 향상 정도가 적다는 단점을 지니고 있다. 본 연구에서는 분말야금법을 이용하여 금속기지에 세라믹상으로 SiC 입자 및 휘스커가 첨가된 복합재를 제조하여 제조공정변수에 따라 마모거동을 pin-on-disk 형태의 마모시험기에서 실험하였으며, 주사전자현미경으로 마모표면관찰 등으로 복합재의 마모기구를 연구하였다.

• Review of KIISC
• /
• v.30 no.2
• /
• pp.5-9
• /
• 2020

널리 알려진 바와 같이 드론산업은 4차 산업혁명을 견인하는 13대 혁신성장 동력 산업 중 하나이다. 드론은 조종사가 탑승하지 않는 무인/원격조종 비행장치로 영상촬영, 감시, 조사, 물품배송 등의 서비스에 활용되고 있다. 드론을 이용한 서비스가 안전하게 상용화되기 위해서는 필수적으로 드론 자체 및 드론 기반 서비스를 보호하는 드론 보안기술이 적용되어야 한다. 드론은 피해자임과 동시에 가해자가 될 수 있는 양면성을 지니고 있기 때문에 이러한 특성을 고려한 보안기술이 필요하다. 최근 드론 보안의 양면성을 고려한 핵심요소로 드론식별모듈(DIM)이 개발되고 있다. 본 논문에서는 드론식별모듈 개념을 정의하고, 주요 기능 소개 및 국제표준화 추진 현황을 설명한다.

• Journal of Ocean Engineering and Technology
• /
• v.4 no.2
• /
• pp.35-40
• /
• 1990

해양 산업에서 심해로의 이동은 해양 구조물의 계류 장치의 중요성을 부각시켰고 그에 따른 기본적인 연구로서의 케이블 동력학에 대한 흥미를 일깨웠다. 거친 해상에서 케이블에 형성될 수 있는 큰 동장력과 기하학적 비선형성의 고려는 케이블의 비선형적 거동 해석에 주요 인자가 될 것이다. 또한 매우 큰 동장력 증폭에 의한 음의 큰 동장력은 케이블의 양의 정장력을 초과할 수 있고, 따라서 전체장력은 영 또는 음이 될 수 있다. 비선형 유체 항력을 포함한 모든 비선형성을 갖는 케이블의 이론적 해석 모델을 개발하고, 수치 결과와 기존의 실험 결과를 비교한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.144-147
• /
• 2011

동시다발적인 산불발생시 한정된 진화자원을 효과적으로 운영하여 산불피해를 최소화하기 위해서는 산불상황에 맞는 진화자원 투입과 배치가 이루어져야 한다. 이를 위해서는 진화자원 투입 및 운영 의사결정을 할 수 있도록 각 진화자원별 진화능력단위에 대한 평가가 이루어져야 한다. 하지만 아직 국내 외적으로 산불진화자원에 대한 진화능력단위 산정에 관한 연구가 이루어져 있지 않다. 따라서 본 연구에서는 우리나라 진화자원을 중심으로 진화능력단위 기준 설정과 함께 각 진화자원별 진화능력단위를 산정하였다. 우리나라 진화자원은 크게 지상진화자원과 공중진화자원으로 구분됨으로 지상진화에 투입되는 주요 진화자원인 등짐펌프 및 불갈퀴 등 손도구를 이용하는 진화인력과 산불진화차량, 이동식 동력살수장치와 산불진화헬기로 구성되는 공중진화자원에 대해 진화효과를 분석, 능력단위를 산정하는 방법을 제시하였다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.349-350
• /
• 2015

소형 어선들은 디젤유를 주 동력원으로 사용하여 모터를 구동시킨다. 이때 사용되는 모터는 배에 필요한 동력 및 전력을 공급해 주는데 리터당 효율을 계산할 경우 효율이 매우 낮다. 그렇기 때문에 전력 변환 효율이 높음에도 불구하고 전체 시스템의 관점에서는 효율이 매우 낮음을 보인다. 본 논문에서는 어선의 전력 계통도를 전기적으로 모델링하여 실제로 일어날 수 있는 모든 시나리오를 시뮬레이션을 통해 확인 할 수 있도록 구성하였다. 또한 낮은 효율의 문제를 해결하기 위하여 태양광 발전 시스템을 도입하여 디젤 모터에 걸리는 부하를 줄여 전체 시스템의 효율이 증가하는 것을 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.68-75
• /
• 2017

This paper presents the experimental and theoretical results of the dynamic responses of a pendular energy extractor in a two-dimensional wave channel. By adopting a wave maker with varying wave height and period, the dynamic responses of the pendular buoy were experimentally obtained. Furthermore, with the aid of the co-simulation of moving particle analysis and rigid dynamic analysis, the dynamic responses of the pendular system were evaluated. In order to validate the feasibility of the proposed wave power generator, the force tuning of the pendular system with restoring energy was carried out. The results provide proof of concept data for the development and design of a commercial model for horizontal wave power generators in the shoreline area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.383-388
• /
• 2020

This study aimed to identify the influence of the power components of the ammunition vehicle on the maximum speed. The maximum speeds of the engine and transmission changes were 3% and 1.7%, respectively. In the case of strong tension based on the track tension, the decrease was 4.6%. A 1.5% increase was obtained when the tension was weak. An examination of the maximum speed by dividing the track tension into six sections revealed the maximum speed to be highest when it was maintained below the middle. Experiments were performed by varying the orbital tension on both sides of the equipment. The maximum speed of the machine was affected by a large part of the tension. The maximum speed test was conducted by adjusting the tension at the driving test site. The results showed that when the tension was strong, the speed was 16.7% higher than the standard requirement. The speed was 28.3% at low tension. The influence of the maximum speed on the track tension was confirmed; the effect was greater than replacing the large parts.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.28-38
• /
• 1981

A survey has been conducted to investigate the presents of breaks down and repair of power tiller for efficient use. Eight provinces were covered for this study. The results are summarized as follows. A. Frequency of breaks down. 1) Power tiller was breaken down 9.05 times a year and it represents a break down every 39.1 hours of use. High frequency of breaks down was found from the fuel and ignition system. For only these system, the number of breaks down were 2.02 and it represents 23.3% among total breaks down. It was followed by attachments, cylinder system, and traction device. 2) For the power tiller which was more than six years old, breaks down accured 37.7 hours of use and every 38.6 hours for the power tiller which was purchased in less than 2 years. 3) For the kerosene engine power tiller, breaks down occured every 36.8 hours of use, which is a higher value compared with diesel engine power tiller which break down every 42.8 hours of use. The 8HP kerosene engine power tiller showed higher frequency of break down compared with any other horse power tiller. 4) In October, the lowest frequency of break down was found with the value of once for every 51.5 hours of use, and it was followed by the frequency of break down in June. The more hours of use, the less breaks down was found. E. Repair place 1) 45.3% among total breaks down of power tiller was repaired by the owner, and 54.7% was repaired at repair shop. More power tiller were repaired at repair shop than by owner of power tiller. 2) The older the power tiller is, the higher percentage of repairing at the repair shop was found compared with the repairing by the owner. 3) Higher percentage of repairing by the owner was found for the diesel engine power tiller compared with the kerosene engine power tiller. It was 10 HP power tiller for the kerosene power tiller and 8 HP for the diesel engine power tiller. 4) 66.7% among total breaks down of steering device was repaired by the owner. It was the highest value compared with the percentage of repairing of any other parts of power tiller. The lowest percentage of repairing by owner was found for the attachments to the power tiller with the value of 26.5%. C. Cause of break down 1) Among the total breaks down of power tiller, 57.2% is caused by the old parts of power tiller with the value of 5.18 times break down a year and 34.7% was caused by the poor maintenance and over loading. 2) For the power tiller which was purchased in less than two years, more breaks down were caused by poor maintenance in comparison to the old parts of power tiller. 3) For the both 8-10 HP kerosene and diesel engine power tiller, the aspects of breaks down was almost the same. But for the 5 HP power tiller, more breaks down was caused by over loading in comparison to the old parts of power tiller. 4) For the cylinder system and traction device, most of the breaks down was caused by the old parts and for the fuel and ignition system, breaks down was caused mainly by the poor maintenance. D. Repair Cost 1) For each power tiller, repair cost was 34,509 won a year and it was 97 won for one hoar operation. 2) Repair cost of kerosene engine power tiller was 40,697 won a year, and it use 28,320 won for a diesel engine power tiller. 3) Average repair cost for one hour operation of kerosene engine power tiller was 103 won, and 86 won for a diesel engine power tiller. No differences were found between the horse power of engines. 4) Annual repair cost of cylinder system was 13,036 won which is the highest one compared with the repair cost of any other parts 362 won a year was required to repair the steering device, and it was the least among repair cost of parts. 5) Average cost for repairing the power tiller one time was 3,183 won. It was 10,598 won for a cylinder system and 1,006 won for a steering device of power tiller. E. Time requirement for repairing by owner. 1) Average time requirements for repairing the break down of a power tiller by owner himself was 8.36 hours, power tiller could not be used for operation for 93.58 hours a year due to the break down. 2) 21.3 hours were required for repairing by owner himself the break down of a power tiller which was more than 6 years old. This value is the highest one compared with the repairing time of power tiller which were purchased in different years. Due to the break down of the power tiller, it could not be used for operation annually 127.13 hours. 3) 10.66 hours were required for repairing by the owner himself a break down of a diesel engine power tiller and 6.48 hours for kerosene engine power tiller could not be used annually 99.14 hours for operation due to the break down and it was 88.67 hour for the diesel engine power tiller. 4) For both diesel and kerosene engine power tiller 8 HP power tiller required the least time for repairing by owner himself a break down compared with any other horse power tiller. It was 2.78 hours for kerosene engine power tiller and 8.25 hours fur diesel engine power tiller. 5) For the cylinder system of power tiller 32.02 hours were required for repairing a break down by the owner himself. Power tiller could not be used 39.30 hours a year due to the break down of the cylinder system.