• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.603-609
• /
• 2008

The purpose of this study is to clarify the effect of the monomer ratio on properties of the polymer-modified mortars using methyl methacrylate-butyl acrylate (MMA/BA) latexes, and to obtain basic data necessary to develop appropriate latexes for cement modifiers. From the test results, the total pore volume of polymer-modified mortars using MMA/BA latexes is linearly reduced with an increase in the bound MMA content and increased in the polymer-cement ratio. In general, the superior flexural and compressive strength of polymer-modified mortars using MMA/BA latexes is obtained at a bound MMA content of 70 or 80 percent and a polymer-cement ratio of 15%. And, the water absorption and chloride ion penetration depth are greatly affected by the polymer-cement ratio rather than the bound MMA content.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.17-20
• /
• 1998

1. 서론 : 계면중합은 제조에 따른 박막의 성능 조절이 가능한 이유로 해서 역삼투용 복합막의 주요 제조 방법으로 제시되어 왔다. 계면중합을 응용하여 제조된 복합막의 성능은 반응 단량체의 종류, 용재의 종류, 단량체의 농도, 반응시간, 열처리 유무 및 온도와 시간 등에 의해 변한다. 한편 위의 변수에 절대적인 영향을 받고 아울러 단량체간의 몰 비가 성립하지 않음으로 해서 최적의 막 성능으로 제시되는 조건을 만족하기 위하여 주로 시행착오에 의한 방법을 동원하여 여러 변수에 다른 제조 막의 성능 고찰을 실시하여 왔다. (생략)

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.86-91
• /
• 2004

Hydrogels with enhanced biocompatibility and biostability were prepared by copolymerization of 2-hydroxyethyl methacrylate (HEMA) and sodium methacrylate (SMA) at high monomer concentration to replace a sponge which has limited applications as an implant material. It was found that incorporation of SMA moiety suppressed cytotoxicity. P(HEMA-co-SMA) hydrogel prepared at SMA feed ratio of 0.05 showed minimal cytotoxicity as compared with a normal cell culture plate. The adhesion and the spreading of cells were preferred on the surface of the hydrogel prepared with SMA feed ratio of 0.01. On the other hand, the hydrogel prepared with SMA feed ratio of 0.05 showed lower cell adhesion. Histological findings revealed no evidence of significant foreign body reaction in the tissues around the copolymer hydrogels. Conclusively, it is suggested that the hydrogels prepared by copolymerization of HEMA and SMA at high monomer concentration are strong candidates for an implant material with excellent biocompatibility and biostability.

• Nuclear Engineering and Technology
• /
• v.4 no.1
• /
• pp.23-30
• /
• 1972

A study on the preparation of wood-plastic combinations by gamma-ray induced polymerization is carried out. In monomer impregnation, the rates and amounts are determined for various woods. The polymerization rates of various monomers and monomer mixtures impregnated mainly domestic woods are studied varying the total gamma-dose and gamma-dose rates. The obtained data indicate that; 1) in impregnation of monomer, populus deltoides is the fastest in rate, and the most impregnated in amount 2) the general trends of polymerization of monomers ill woods is in the order of vinyl acetate--methyl metacrylate--styrene, ranging from 3 to 15 Mard of total does in rate of 4$\times$10$^4$rad/hr., thus vinyl acetate or methyl metacrylate is suitable monomer in view of polymerization rate, 3) the successful woods in combination with monomer are pinus rigida and pinus densiflora in view of polymerization rate, 4) the monomers in woods are more easily polymerized under the conditions of moderately lower does rate, 2.1$\times$10$^4$rad/hr.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1627-1634
• /
• 2020

In this study, water-based acrylic adhesives as copolymers with acrylic acid, 2-hydroxyethyl acrylate were synthesized using ethyl acrylate, 2-ethylhexyl acrylate, and lauryl methacrylate as the main monomers. Prepared water-based acrylic adhesive was compared to physical properties such as solid content, average particle size distribution, initial adhesive force, maximum adhesive force, peel strength, and heat resistance.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.190-196
• /
• 1990

The biological active monomer, 1-(methacryloyloxymethyl)-5-fluorouracil(MAOMFU) was synthesized from 2, 4-bis(trimethylsilyloxy)-5-fluoropyrimidine. Poly(MAOMFU) poly(1-methacryloyloxymethyl-5-f1uorouracil-co-methyl methacrylate), and poly(MAOMFU-co-MMA) were also obtained by radical polymerization at $60^{\circ}C$. The monomer reactivity ratios, $r_1$ and $r_2$ were determined by $Kelen-T\ddot{u}d\ddot{o}s$ method ; $r_1(MAOMFU)=0.72$, and $r_2(MMA)=1.24$. These reactivity values imply that the copolymerization was mainly affected by the steric hindrance of MAOMFU. It was found from kinetic measurements that the rate constants of solvolysis are given as $6.42{\times}10^{-5}sec^{-1}$ and $7.40{\times}10^{-6}sec^{-6}$, respectively, for MAOMFU and poly(MAOMFU).

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.550-555
• /
• 2006

The coating material for the ink-jet printing paper tends to be waterbase as the waterbase ink-jet ink is used more widely. Waterbase coating material consists of alumina sol as a pigment, poly(vinyl alcohol) as a main binder and polymeric additive for improving properties. In this study, polymeric auditive was synthesized by combining one or toto monomers among methacrylic acid, acrylic acid and acrylamide to the basic monomers, styrene and n-butylacrylate. The properties of printability such as ink absorption, ink spreading, and optical density, glossiness and water resistance were investigated by changing the kinds of surfactants, the composition of monomers and the structure of polymer particles. Results showed that materials containing anionic surfactant and/or acrylic acid had problems in com-patibility with alumina sol. Also, coating materials containing acrylamide had good printability and lout glossiness while those containing methacrylic acid did not have good printability and high glossiness.

• Journal of the Korean Chemical Society
• /
• v.48 no.3
• /
• pp.229-235
• /
• 2004

For the study of hydrogen bonding phenomenon of high energetic compounds, we have been carried out a theoretical calculations for the nitromethane with the program Gaussian-98. The calculations at levels of restricted BLYP/6-311++G(d,p), B3LYP/6-311++G(d,p) and MP2/6-311++G have been performed to obtain molecular structures, hydrogen bonding effects and vibrational spectra of nitromethane monomer and dimer. The results show nitromethane is favored to make two hydrogen bonds between molecules and the nitromethane dimer is more stable than the monomer about 15.2, 19.4 and 32.6 kJ/mol for the BLYP, B3LYP, and MP2 level calculations, respectively.

• Journal of Technologic Dentistry
• /
• v.35 no.4
• /
• pp.287-293
• /
• 2013

Purpose: This study is to provide basic data of the dental acrylic denture base resin in the mechanical property difference investigation according to the monomer composition weight ratio of the acrylic denture base resin. Methods: The monomer composition of the acrylic denture base resin and weight ratio makes the different specimen. It measured the mechanical property with the specimens through Hardness Test, Tensile Test, Flexural Test, Flexural Modulus, FT-IR Test. Results: The control group Vertex was 18.4 Hv and the experimental group MED was 14.46~19.07Hv in the hardness test. Vertex was 364N, MED-3 was lowest in the tensile strength test and the Head of a family cursor declination was big. The result declination of the experimental specimens showed. Vertex and MED-2 was the highestest in the flexural test and after coming MED-6, MED-5, MED-1, MED-3, MED-4. Vertex and MED-2, as to a spectrum for $500{\sim}1800cm^{-1}$ peak can show the excellent degree of polymerization in the FT-IR Test. Conclusion: The ideal weight ratio of the monomer of the acrylic denture base resin of which the mechanical property is the highestest was MMA 100g, EDGMA 5g, DMA 0.2g, of MED-2.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.23-31
• /
• 2016

자유 라디칼을 이용한 RAFT 중합은 성장하는 고분자 반응을 제어할 수 있는 특성이 있어 주목 받고 있는 고분자 합성방법 중 하나이다. 이 반응의 기작은 agent라 불리는 분자를 주축으로 삼아 단량체들을 단계적으로 성장하는 가역적 방법으로 원하지 않는 종결반응으로부터 고분자 라디칼을 보호하는 역할을 수행한다. 보호의 근본적인 원인은 중간체 상태에서의 안정화 정도와 관련이 있으나 안정해진 만큼 반응속도가 느려지는 지연효과가 발생한다. 지연효과를 유도하는 원인은 많은 논란이 있었으며 그 중 하나로 agent에 존재하는 Z 치환기의 영향을 원인으로 지목하고 있다. 본 연구는 Z 치환기의 변화에 따른 안정화 정도를 파악하기 위하여 RAFT agent로 주로 이용하는 것 중 두 개의 황이 있는 dithioester와 xanthate를 WxMacMolplt 7.3.2를 이용하여 propagation 초기 단계를 구현한 후 GAMESS2 프로그램을 이용하여 양자화학적 계산을 수행하였다. 계산결과 안정화 에너지와 경계 궤도함수에서는 phenyl기가 있을 때 공명효과에 의하여 안정화가 이루어졌으며 또한 propyl benzyl에서도 늘어난 알킬 사슬의 donating effect로 인한 안정화 영향의 범위를 발견하였다. PES 기법을 통해 두 methyl 단량체를 움직이면서 반응하는 동안의 에너지 변화를 알아보았으며 그 결과 dithioester는 Z 치환기의 변화에 더 많이 의존한다는 것을 확인하였다. 본 연구를 종합해본 결과 phenyl을 제외한 aryl기가 있는 dithioester는 낮은 addition 퍼텐셜과 안정화 에너지를 가질 수 있을 것이고 지연효과를 줄일 수 있을 것으로 기대된다.