• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.1
• /
• pp.26-41
• /
• 2024

To ensure safer road conditions, understanding the human factors influencing driving behavior is crucial. However, there are many difficulties in deriving the characteristics of individual human factors that affect actual driving behaviors. Therefore, this study analyzes self-reported dangerous-driving propensities in order to explore potential correlations with drivers' behaviors. The goal is to propose a method for assessing driving tendencies based on varying traffic scenarios. The study employed a questionnaire to gauge participants' propensity to drive dangerously, utilizing a simulator to analyze their driving behaviors. The aim is to determine any notable connections between dangerous-driving propensity and specific driving behaviors. Results indicate that individuals exhibiting a high propensity for reckless driving, as identified by the Korean DBQ, tend to drive at higher speeds and display more aggressive acceleration patterns. These findings contribute to a potential method for assessing reckless driving drivers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.217-224
• /
• 1994

변속기에서 발생하는 치타음을 클러치를 통하여 해결하려는 방법으로 자동차 중립시와 주행시 각기 다른 비틀림특성을 갖는 클러치를 대상으로 한 실험으로부터 엔진플라이휠, 인풋기어, 변속기 케이스의 진동을 측정하고 분석함으로써 다음과 같은 결론을 얻었다. 자동차 중립시나 주행시에 수동변속기에서 발생하는 치타음은 클러치를 통하여 해결될 수 있음을 알 수 있었다. 클러치의 프리댐퍼와 메인댐퍼의 비틀림강성과 히스테리시스는 중립시와 주행시 치타음에 대해 각기 다른 특성을 갖게 되는데 메인 댐퍼만으로 구성된 클러치는 주행시에는 치타음을 제거하는데 효과적이지만 중립시에는 인풋기어의 비틀림 공진에 의하여 변속기가 가진되어 치타음이 발생하였다. 주행시 변속기 치타음 제거효과를 감소시키지 않고 중립시 변속기에서 발생하는 치타음을 제거하기 위해 메인댐퍼만으로 이루어진 클러치디스크에 프리댐퍼 부분을 첨가하여 보았는데 자동차 주행시의 치타음 제거효과를 유지하면서 중립시의 치타음을 제거시킬 수 있다는 것을 확인하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.443-444
• /
• 2019

공유경제 시대의 다양한 전기구동플랫폼 운용에 유효한 새로운 유지보수 가이드라인을 도출하고자, 본 연구는 하이브리드자동차와 전기자동차의 특성을 모두 갖는 PHEV의 장기간 주행 데이터를 분석하여, 주요 부품의 상태 변화를 파악하였다. PHEV의 모터, 인버터, 2차전지 등 주요 부품의 주행 데이터 변화를 관찰하여 마일리지 누적에 따른 상태변화가 큰 부품을 파악하였다. 분석결과 1만Km 이상 주행 시 보조 배터리의 온도와 5만Km 이상 주행 시 2차전지의 온도 변화가 유의미하게 발생함을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.38-45
• /
• 2020

A magnetically levitating capsule train, which runs inside the sub-vacuum tube, can reach ultra-fast speeds by dramatically reducing the aerodynamic drag and friction. The capsule train uses the superconductor electrodynamic suspension (SC-EDS) method for levitation. The SC-EDS method has advantages, such as a large levitation gap and free of gap control, which could reduce the infra-construction cost. On the other hand, disadvantages, such as the large variation of the levitation-guidance gap and small damping characteristics in levitation-guidance force, could degrade the running stability and ride comfort of the capsule train. In this study, a dynamic analytical model of a capsule train based on the SC-EDS was developed to analyze the running dynamic characteristics. First, as important factors in the capsule train dynamics, the levitation and guidance stiffness in the SC-EDS system were derived, which depend non-linearly on the velocity and gap variation. A 3D dynamic analysis model for capsule trains was developed based on the derived stiffness. Through the developed model, the effects of the different running speeds on the ride comfort were analyzed. The effects of a disturbance from infrastructure, such as the curve radius, tube sag, and connection joint difference, on the running stability of the capsule train, were also analyzed.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.109-121
• /
• 2006

The road should be designed in the consistent alignment which the driver can drive safely. Also, proper highway environments in order to maintain optimal operational speeds on highway sections should be provided In design stage, for highway environments, it is essential for an operational speed estimation model to different highway environments. If a method which could evaluate the status of the road safety is developed through this operational speed estimation model, it is possible to provide safe and more comfortable highways to road users. In the study factors to effect on operational speeds are classified into three groups horizontal & vertical alignments and traffic operation characteristic factors. Factors are chosen to effect on operational speeds by using collation analysis as classifications of tangent sections, horizontal curve sections and vertical curve sections. In order to develop operational speed estimation models in express highways, multi-regression analysis has been used in this study using the selected factors. This study has meaning that the developed estimation models for operational speeds and evaluation of degree of safety to horizontal and vortical alignments simultaneous. In order to represent whole area of the country with the developed models, the models should be re-analyzed with vast data related with road alignment factors in the near future.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.705-712
• /
• 2021

The purpose of this study is to propose the features of autonomous DRT UX design based on level 5 autonomous vehicle applicable in 2027. As the scope of the study, the system focused on the interaction between the elderly and the in/outside of the vehicle, and the level 5 autonomous vehicle was the subject of the study. As of 2021, the targets for application were set from 60s to 90s. This study is different from previous studies in that it is a study on the features of autonomous DRT UX design that derives practical insights through direct communication with the elderly. As a research method, autonomous vehicle and DRT were theoretically considered through literature research, and based on this, cases of autonomous vehicle and DRT were analyzed. As a case study, generalization was conducted through interviews with the elderly, test-drive of autonomous vehicle, video production, survey, and VR test-drive of autonomous vehicle for the elderly. Ten features of autonomous DRT UX design were derived through focus group interview(FGI), and the derived features were classified into reservation, get on, input, driving, emergency, and get off. Through this study, I hope that it will contribute to improving mobility of the elderly and further accelerate the practical use of autonomous DRT.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.14-14
• /
• 2017

본 연구는 트랙터 주행노면의 토양 특성이 트랙터 승차진동에 미치는 영향을 분석하는 것을 목표로 하였다. 여러 토양조건에서 실제 트랙터 주행실험을 진행하는 것은 어렵기 때문에, 상용 CAE 프로그램을 이용하여 트랙터를 모델링하고 시뮬레이션을 진행하였다. 이를 통해 여러 토양조건에 따른 승차진동의 특성을 비교, 분석하였다. 모델의 유의성은 트랙터 아스팔트 주행실험을 통해 진동데이터를 획득하고 실측 진동 데이터와 시뮬레이션을 통해 얻어진 진동 데이터를 분석해 검토하였다. 이 때, 노면 토양의 특성에 따라서 트랙터가 장애물을 만났을 때 순간적인 진동 특성을 분석하기 위해서 트랙터 주행 노면을 사인범퍼(sine-bumper) 노면으로 설정하고 주행실험 및 시뮬레이션을 진행하였다. 본 연구에서는 강체 노면, Heavy clay, North Gower Clay Loam 토양, Grenvile Loam 토양의 네 가지 노면 조건을 분석하였다. 분석 결과 침하가 발생하지 않는 강체 노면보다 침하가 발생하는 세 가지 토양 조건에서 장애물에 따른 순간적인 진동이 더 크게 나타나는 것을 확인할 수 있었다. 다만 승차진동이 토양 파라미터와 단순히 선형적인 관계만을 보이는 것은 아니라는 것도 확인할 수 있었다. 이 후, North Gower Clay Loam 토양 조건에서 트랙터 속도에 따른 시뮬레이션 진행 결과를 분석하였을 때, 토양 침하가 발생하는 토양 조건에서도 속도가 증가함에 따라서 진동 크기가 증가하는 것을 확인할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.103-105
• /
• 2003

본 논문에서는 이동로봇의 마찰력 보상을 위해 퍼지 외란 관측자를 설계한다. 이동로봇은 주행 바닥면에 따라 주행 특성이 달라질 수 있다. 주행 중 발생하는 마찰력은 비선형적인 특성을 가지므로 이에 검출할 수 있는 퍼지 관측기를 설계하도록 한다. 설계된 퍼지 관측기를 적용함으로써 주행 바닥 면의 상태에 따라 발생하는 마찰력의 영향을 최소화시킴으로써 주행 특성을 효과적으로 개선시킬 수 있다.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.110-116
• /
• 2013

Track irregularities is one of the key factors influencing the running behavior of trains. In order to ensure safety and ride comfort of train, the criteria for track irregularities should be adequately established regarding vehicle velocity, vehicle characteristics, characteristics of the track recording car, and measurement interval. Also, track maintenance should be carried out thoroughly according to the criteria for managing track irregularities. Numerical analysis was conducted to investigate the influence of track alignment on the running behavior of Korean high speed train(KTX). Various wavelengths and amplitudes of lateral alignment were considered as parameters for this study using the Vampire program, a vehicle dynamics modeling package in railway environment. Derailment, lateral load, bogie acceleration and body acceleration of numerical analysis results due to alignment were investigated. Finally, the influence of the alignment on safety and ride comfort for the KTX was evaluated. This study indicates that alignment irregularities have significant impacts on running safety, and that the criteria used to manage alignment irregularities should be restrictive to ensure the running safety of the KTX.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.613-618
• /
• 2007

The performance of the railway bogie is classified into the stability and the steering performance. Testing for the bogie stability is conducted on the roller rig, but testing for the bogie steering performance on test facility is very difficult, so the testing for the vehicle curving performance is conducted on the real curve track. Testing the railway bogie on the full scale test rig is desirable, but it caused many problems relating to test costs and test time. As a possible alternative to overcome these problems, a small scaled test rig is actively used in the field of bogie stability. Thus, in this paper, we have studied a scaled track to test the bogie steering performance. For this purpose, we designed the 1/5 scaled test track equivalent to radius 200 curve and confirmed the validity of the testing for the bogie steering performance on the sealed curve track through the testing using 1/5 scaled bogie.