• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.282-285
• /
• 1989

This paper presents a new algorithm for position control of the BALL-HOOP system driven by th D.C. servo motor-through the micro computer simulation. The Stale Feed back + PID control algorithm is proposed. This algorithm performs that the settling time is faster and overshoot is decreased more remarkably than the PID and the State Feedback algorithm alone. In this simulation the difference equations are used to calculate the output of the control system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1339-1345
• /
• 1989

본 연구에서는 앞에서 개발된 온도 제어 시스템을 더욱 소형 경량화하기 위해 서 일반 마이크로 컴퓨터 대신에 원보드 마이컴(one-board micom)을 사용하였다. 원보드 마이컴은 프로그램을 기계어로 작성해야하는 어려움이 있으나 가격이 저렴하고 주변장치가 필요없으며, 크기가 작아 제어시스템을 소형경량화 시킬수 있는 장점이 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.187-191
• /
• 1992

본 연구에서 퍼지제어 시스템 설계를 위한 마이크로 컴퓨터 지원 설계 기법과 프로그램 FCS 를 개발하였다. 이 프로그램은 IBM-PC 호환기종 (80386,804860) 에 사용되는 Turbo-C 언어를 사용하였고, Borland C $^{++}$ 2.0 컴파일러를 사용하였다. 제어시스템의 각 요소를 모듈화 하여 동특성을 차분 방정식으로 표시하여 사용자가 쉽게 대치할 수 있도록 서브루틴화 하였다. 퍼지제어 규칙의 최적조건, 퍼지 입출력 변수의 최적조건, D/A 및 A/D 변환기의 최적 비트수, 최적 샘플링 시간을 결정 할 수 있다. 공기예열 시스템을 예로서 이 프로그램을 이용하여 설계하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.27-30
• /
• 2000

In this paper, we determine the design criteria of haptic device considering the human haptic system and determine the design specifications. We developed a new 2DOF haptic device based on the specifications. It has the wide workspace, statically-balanced, constant inertia matrix, well-conditioned Jacobian matrix and so on. There also is not singularity point within workspace of the device. We show that it has better performance than other 2DOF haptic device in the many aspects.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.71-74
• /
• 1992

This paper describes the automation of the surface grinder for a grinding wheel by application of programmable logic controller(PLC) with a position sensor, and a limit switch. The control system is designed to provide feeding a workpiece on the turn table and pressing it by the upper disk automatically. In this development the automation of checking the thickness of a grinding wheel is most important. In order to measure the relative displacement, the proximity sensors were employed and the sensitivities of the sensors were investicated and discussed the superiority. It has been shown by model experiment that the automation system of the surface grinder is performed satisfactory.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.530-533
• /
• 1986

A manipulator with 3 degrees of freedom is developed to automate operation of 60 ton pressing process. The pneumatically actuated manipulator is controlled by a programmable controller. Four seconds of cycle time which is faster than manual operation is achieved. Though the flexible feed mechanism, the system can accammodate any size of workpieces between 80*80 and 200*200 under 1 kg of weight.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.282-287
• /
• 1987

This paper presents the development of a microcomputer-aided design program for a digital control system. The program has been written in GWBASIC language which is suitable for Intel 8086II CPU with 640KB memory. By utilizing this program, sampling time, the number of bits A/D and D/A converter, and the stability for the digital control system carl be determined, To demonstrate the utility of this program, a microcomputer controlled precision temperature control system has been employed as an example.

• 대한방사선방어학회:학술대회논문집
• /
• 2010.04a
• /
• pp.134-135
• /
• 2010

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.58-64
• /
• 1992

이 논문에서는 Hoop속에 Ball이 구르는 간단한 전기 기계 구동 장치를 고려 하였다. 이 장치의 구조는 간단하지만 원유수송선과 같은 대형 액체를 고속 수송할 때 발생되는 "liquid slop"문제를 해석하고 제어하는데 좋은 모델이 된다. 본 연구에서는 liquid slop dynamics를 언급 하였고, 이러한 시스템을 제어 하기 위하여 재래식 PID, state-feedback 알고리즘의 유용성을 검토하였고 하이브리드 제어방식을 제안하였다. 하이브리드 제어방식이 다른방식보다 성능면에서 다소 우세함을 알 수 있었다.을 알 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.88-99
• /
• 1999

In this paper, a disassemblability evaluation has been investigated quantitatively by using an ease-of-disassembly design method. Four categories such as recognizability, approachability, separability, and treatability have been analyzed in details. A simulation software for estimating the ease-of-disassembly design method has been developed and applied to door trim and spin basket respectively as an example.