• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.4
• /
• pp.339-345
• /
• 2002

This paper presents a portable power supply equipped with a battery charger. The proposed system can be operated separatedly distinguishing between DC/AC and AC/DC function. The former uses a battery and the latter a line voltage as the power source to operate on an inverter and a battery charger, respectively. To keep the output voltage being sinusoidal and to have the high dynamic performances even In the cases of load variations, a proper control method is adapted. The operational principles and analysis are explained in detail. The validity of the proposed system is proved from the experimental results.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.78-87
• /
• 2003

High-frequency (126-㎑) bottom backscattering measurements with various bottom types were conducted at the water tank in Ocean Acoustic Laboratory, Hanyang University. For the purpose of investigating the energy distribution of bottom scattering with various bottom types, the sediment was varied with gravel, sand, sandy mud and mixed bottoms. To examine the anisotropic nature of the scattering due to the orientations of bottom ripple, the footprints were made transverse and longitudinal to the direction of incident wave. The total scattering characteristics are that the larger grazing angles the larger backscattering strengths become and backscattering strengths for a transverse ripple case are higher than those of longitudinal ripple case. finally, the variations of scattering strength depend mainly on the ripple's orientation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.135-140
• /
• 2008

In this paper, the spiral antenna with the center frequencies of 315MHz, 433MHz, and 447MHz for RKE system of a vehicle is designed on PCB. The antenna is microstrip line-fed, and applied PIFA concept near the feeding part to easily tune center frequency and input impedance. The PIFA-type spiral antenna with the size of $30mm{\times}20mm$ is designed on printed PCB by considering the effect of circuits and components on PCB, ECU case and vehicle body. Also chip inductor inserted dual-band spiral antenna of 315MHz and 447MHz is designed. We found that the antenna designed on PCB satisfied the antenna specifications through measurement and field test.

• Journal of Sensor Science and Technology
• /
• v.9 no.4
• /
• pp.327-333
• /
• 2000

Transversal SAW(Surface Acoustic Wave) filters of 340MHz were fabricated on piezoelectric substrates of the LN $128^{\circ}$ Y-X wafers. Both of spacing and width of IDT were $1.435{\mu}m$. For improving the power durability characteristics, titanium layer was inserted between aluminum electrode and piezoelectric substrate since it has high density, low thermal expansion coefficient, and good adhesive properties. Power durability was evaluated with respect to the thickness of inserted titanium layer and the temperature of heat treatment. Power durability is improved with increasing the thickness of the inserted titanium layer. Moreover, it is remarkably improved by heat treatment at the temperature of $300^{\circ}C$.

• Applied Biological Chemistry
• /
• v.37 no.2
• /
• pp.77-84
• /
• 1994

Sweetpotatoes were baked (BK), microwaved (MW), microwaved/baked (MWBK), and microwaved/hold/microwaved (MWHO). Sugars, Huntercolors, compression and shear forces, sensory scores, moisture content, starch, and alcohol insoluble solids (AIS) were determined for each treatment. The BK roots contained higher (p<0.05) amount of sugars and less (p<0.05) starch. The MW roots contained higher (p<0.05) amount of starch, AIS, and less (p<0.05) sugar. The BK product resulted in the least (p<0.05) compression and shear forces needed to break it. The MW product demanded the greatest (p<0.05) force. The MWHO showed very similar results to the BK. Sensory scores for the BK and the MWHO sweetpotatoes were very acceptable. In color scores, the MWHO products were very acceptable and similar to the BK in flavor.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.89-92
• /
• 2000

고주파 대역의 소오나를 이용하여 해저면 상태, 즉 해저면 거칠기 및 비균질성의 변화에 따른 음파 산란 영향을 파악하기 위한 실험을 실시하였다. 지음향 요소 중, 평균 입도 크기(mean grain size)는 입도 분석을 통하여 결정하였으며, 이를 기초로 하여 나머지 요소들(Density, Velocity Ratio 등)을 결정하였다. 또한 공극률을 측정하여 평균 입도 크기와 비교함으로써, 공극률과 입자 크기 사이의 관계를 나타내보고자 하였다. 이렇게 파악된 해저면 특성들과 해저면에 의해 산란되어 들어오는 신호의 분석을 통하여 해저면의 상태에 따른 신호의 변화를 비교하였다. 획득된 자료들은 해저면의 상태, 즉 해저면 연흔(ripple)의 유무와 해저면내의 비균질성에 따라 수신되는 신호에 차이를 나타내었으며, 또한 입사각, 산란 각 및 방위각의 변화에 따라 신호에 차이를 보였다. 수신된 신호들간의 비교를 통하여 해저면내의 비균질성의 차이에 따른 산란 음파의 변화 양상을 파악하고자 하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.551-560
• /
• 2003

This paper summarizes development of a 10KW stand-alone power processing unit for 5KW SOFC-low voltage battery hybrid fuel cell power generation system. The power processing unit Includes three parts a high frequency DC-DC converter boosts low fuel cell voltage, a DC-AC inverter converts a dc voltage into a regulated ac voltage and a bidirectional DC-DC converter charges or discharges the battery. The converter topology, design, control method, and experimental result arc presented to meet the specifications such as efficiency of 90% and cost of $40/KW laid down for the "2003 Future Energy Challenge Competition" organized by the U.S. Department of Energy and IEEE. and IEEE.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.4
• /
• pp.1-10
• /
• 1997

Resonant dual converters are remarkable as circuit topologies that can realize a power conversion on the high switching frequency with low switching loss. In this paper, bi-directional resonant power conversion system is established, which makes the powering and the regeneration possible, by loading an induction motor. For its practical use, the operation characteristics of the system are to be examined through a series of experiments. The characteristics are : (l)input/output, (2)resonants. (3)tum-off and zero voltage in the main devices and clamp device. By examining the measured waveforms, this study will investigate some problems in the system, and also give some suggestions for a further study.

• Journal of Broadcast Engineering
• /
• v.27 no.1
• /
• pp.91-103
• /
• 2022

Determination of sound source characteristics such as: sound volume, direction and distance to the source is one of the important techniques for unmanned systems like autonomous vehicles, robot systems and AI speakers. There are multiple methods of determining the direction and distance to the sound source, e.g., using a radar, a rider, an ultrasonic wave and a RF signal with a sound. These methods require the transmission of signals and cannot accurately identify sound sources generated in the obstructed region due to obstacles. In this paper, we have implemented and evaluated a method of detecting and identifying the sound in the audible frequency band by a method of recognizing the volume, direction, and distance to the sound source that is generated in the periphery including the invisible region. A cross-shaped based sound source recognition algorithm, which is mainly used for identifying a sound source, can measure the volume and locate the direction of the sound source, but the method has a problem with "blind spots". In addition, a serious limitation for this type of algorithm is lack of capability to determine the distance to the sound source. In order to overcome the limitations of this existing method, we propose a QRAS-based algorithm that uses rectangular-shaped technology. This method can determine the volume, direction, and distance to the sound source, which is an improvement over the cross-shaped based algorithm. The QRAS-based algorithm for the OSSD uses 6 AITDs derived from four microphones which are deployed in a rectangular-shaped configuration. The QRAS-based algorithm can solve existing problems of the cross-shaped based algorithms like blind spots, and it can determine the distance to the sound source. Experiments have demonstrated that the proposed QRAS-based algorithm for OSSD can reliably determine sound volume along with direction and distance to the sound source, which avoiding blind spots.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.4
• /
• pp.342-354
• /
• 2008

Some statistical characteristics of deepwater waves along the Korean coast have been investigated using various sources of wave measurement and hindcasting data. For very large waves comparable to design waves, it is recommended to use the average value of the empirical formulas proposed by Shore Protection Manual in 1977 and by Goda in 2003 for the relation between significant wave height and period. The standard deviation of significant wave periods non-dimensionalized with respect to the mean value for a certain significant wave height varies between 0.04 and 0.21 with a typical value of 0.1 depending upon different regions and different ranges of significant wave heights. The mean and standard deviation of the principal deepwater wave direction are presented at the 106 coastal grid points along the Korean coast. For relatively large waves, the probability density function of the directional spreading parameter $s_{max}$ is expressed as a lognormal distribution. The most suitable frequency spectrum in the Korean coast is the TMA spectrum. The probability density function of the peak enhancement factor $\gamma$ is also expressed as a lognormal distribution, with its mean value of 2.94, which is close to the value in the North Sea.