• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.10-17
• /
• 2000

In boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants, conventional measurement techniques(replica method, electric resistance method, and hardness test method) for measuring creep damage have such disadvantages as complex preparation and measurement procedures, too many control parameters. And also, these techniques have low practicality and applied only to component surfaces with good accessibility. It needs to apply a reliable and quantitative ultrasonic nondestructive evaluation method that can be replaced for these equipment. In this study, both artificial creep degradation test using life prediction formula and frequency analysis by ultrasonic tests for crept specimens were carried out for the purpose of nondestructive evaluation for creep damage. As a result of ultrasonic tests for crept specimens, we conformed that the high frequency side spectra decrease and central frequency components shift to low frequency band, and also their bandwidth decreases as increasing creep damage in backwall echos.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.16-21
• /
• 2001

Improvement of sound absorption capability of wood and wood-based board by resonant absorption was attempted. Sound absorption coefficients of wood and wood-based board which contain normal, simple perforation and stair type perforation had been estimated by the tube method using standing wave ratio. Sound absorption coefficients of wood specimens of simply perforated and perforated with stair were higher than that of normal specimens. Especially, in case of stair type perforation, it was about 50 to 60% higher than that of normal specimen in the frequency of 3 to 4KHz. It was considered that the cavity which had been formed by perforation with stair type behaved as a single resonator. Wood-based board showed good sound absorption coefficients in the frequency from 125Hz to 2KHz and that of perforated board showed a little higher in the frequency from 300Hz to 500Hz than that of normal board. The computed data of resonant frequencies at several sizes of cavity showed good accordance with the estimated data of those.

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.171-187
• /
• 2007

The purpose of this study is to measure the lathe tool vibration and verify its usefulness using the fiber optic interferometeric sensor instead of using common accelerometer. To compare two vibration signals a Fabry-Perot fiber optic sensor(FOS) is directly attached to the left-side surface of the lathe tool and an accelerometer is attached near to the fiber optic sensor. Measurement signals from the FOS and theoretical results of receptance simulation are compared. When the amplitude of tool vibration increased the frequency shift phenomena was occurred. This means that mass effect occurred and vibration spectrum moved to the low frequency region. Generally this results is agreement to the regenerative chatter. The chatter frequency is not same as the natural frequency of the tool itself. The FOS can also applied to laboratory experiments for students. This experimental technique is perhaps the first attempts because of directly attachment technique. Therefore, suggested Fabry-Perot fiber optic sensor can be used to monitoring the tool wear and vibration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.1022-1032
• /
• 2012

In OFDMA-based wireless mesh networks, synchronization of carrier frequencies among adjacent nodes is known to be difficult. In this paper, a distributed synchronization technique is proposed to solve the synchronization problem in OFDMA-based wireless mesh networks by using the bio-inspired algorithm. In the proposed approach, carrier frequencies of all nodes in a mesh network are converged into one frequency by locally synchronizing the frequencies of adjacent nodes. It may take a long time to be converged in some topologies since the convergence characteristic of carrier frequencies in a mesh network may vary depending on the size of the network and deployment of nodes. It is shown that fast frequency synchronization, not heavily depending on the topology, can be achieved through the proposed algorithm with an adjustable weight.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1004-1011
• /
• 2005

In OFDM (Orthogonal Frequency Division Multiplexing) system, sampling frequency offset causes performance degradation due to increase of ICI. Sampling frequency offset can be generally estimated by correlation of the pilot signal or the known pattern within two contiguous OFDM symbol however, this method has the throughput degradation and the difficulty in applying to various OFDM systems. In this paper, we propose a new algorithm for sampling frequency offset estimation which can solve aforementioned issues. The proposed algorithm uses a single OFDM symbol to prevent throughput degradation and to apply to various OFDM-based communication systems flexibly Also, the proposed algorithm can enhance reliability by observing more number of correlations compared to the established algorithm in frequency domain. Extensive computer simulation shows that the proposed algorithm can improve the system performance in various channel conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.777-786
• /
• 2003

The phase noise characteristics of the phase-locked loop frequency synthesizer were predicted based on the analysis for phase noise contribution of noise sources. The proposed phase noise model in this paper more accurately predicts the phase noise spectrum of frequency synthesizer. To accurately model the phase noise contribution of noise sources in frequency synthesizer, the phase noise sources were analyzed via modeling of the frequency divider and phase noise components using Leeson model for reference signal source and VCO. The phase noise transfer functions to VCO from noise sources were analyzed by superposition theory and linear operation of phase-locked loop. To evaluate the phase noise prediction model, the frequency synthesizers were fabricated and were evaluated by measured data and prediction data.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.191-192
• /
• 2017

본 6-스텝 운전은 하드웨어의 수정 없이 운전 영역을 확장할 수 있다는 장점을 가진다. 하지만, 샘플링 주파수 대비 기본파 주파수가 크면 저주파수 전류 맥동 문제가 발생한다. 이는 시스템의 효율을 낮추고 안정성 문제를 일으킨다. 따라서, 본 논문에서는 가변 시간 제어 방법을 제안한다. 선형화과정을 통해 정확한 전달 함수를 구하고, 이를 이용하여 추가적인 약 자속 제어기나 전류 지령 생성기 없이 6-스텝 운전을 구현 할 수 있다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.35-38
• /
• 1998

입체음향 시스템의 방향감 제어에서 필수적인 머리전달함수(Head-Related Transfer Function)는 일반적으로 FIR 또는 IIR 필터로 구현되며, IIR 필터의 경우 FIR 보다 비교적 저차 모델링이 가능한 장점을 갖는다. 본 논문에서는 Balanced Model Reduction(BMR) 방법을 이용하여 비교적 높은 차수를 가지는 FIR 형태의 HRTF 필터를 IIR 필터로 설계하고, 입체음향 시스템의 실시간 구현시 필수적인 계산의 효율을 높이는 방법을 제시한다. 또한 IIR 필터로 근사화된 HRTF 필터의 주파수 패턴을 분석하여, 음상정위에 큰 영향을 미치는 주파수 대역을 좀 더 나은 해상도를 갖도록 설계하여 저차 모델 설계시 발생하는 오차가 음상정위에 미치는 영향을 최소화 하였다.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.15-16
• /
• 2012

본 논문에서는 스위칭 주파수의 구형파 전압 주입을 이용한 IPMSM의 센서리스 제어 기법에서 개선된 신호처리 방법을 제안하였다. 제안된 기법에서는 기본파 전류와 고주파 성분 전류추출에 필요한 필터를 간단히 구현함으로써 신호처리에서 발생하는 시지연을 줄일 수 있으며, 그 결과 센서리스 제어의 동특성을 개선할 수 있다. 800[W]급 IPMSM에 대한 실험을 통해 제안된 방법의 타당성을 검증하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.345-345
• /
• 2013

한미 키리졸브 훈련에 따라 북한의 GPS 전파교란에 대비하여 동해안 속초지역에 운항중인 한빛호에 고성능 GNSS 수신기와 안테나를 설치 후 전파교란을 측정(2013. 3. 14 ~ 3. 21)하여, 원시정보(GPS/GLONASS의 추적 위성수, 위성배치(DOP), 위성신호세기)를 분석한 결과 GPS/GLONASS 위성신호와 유사한 주파수 전파 간섭은 발생하지 않은 것으로 측정 되었으며, 향후 지속적 측정을 통하여 위성신호와 비슷한 주파수 대역의 전파교란 대비 필요.