• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.47-53
• /
• 2023

In this paper, We designed a waveguide-type feed structure that converts millimeter wave dual-polarized signals into monopulse signals and presented a manufacturing method. At millimeter-wave such as the W band, the size of the waveguide is very small, making it very difficult to manufacture complex structures. Therefore, because manufacturability is important for the waveguide-type feed structure in the millimeter-wave, electro forming and diffusion bonding were proposed and verified in this study. The designed monopulse feed structure consists of eight 180° hybrids that combine 90° hybrids and self-compensating phase shifters, and four OMTs to separate dual polarization. The designed feed structure was designed to facilitate electro forming and diffusion bonding, and the manufactured feed structure was verified through a network analyzer. It was confirmed that the two proposed production methods produce a monopulse signal well through the measured magnitude and phase of the port.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.788-793
• /
• 2004

This paper proposes new configuration for the dual power amplifier that operates at 5.8 GHz for the wireless LAN and 1.8 GHz for the PCS. It dose not select the input signal but amplify the dual band signals simultaneously. Broadband diplexer is used at the input to separate the dual band signals. Output power of each amplifier is 1 W. The PBG is employed to improve the performance of power amplifier. Generally, the PBG is employed at the end of output matching network. But in this paper, the PBG is employed in the load pull output matching circuit of amplifer to maximize the output power.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.91-94
• /
• 2002

음성인식 시스템의 실용화를 위해서 우선적으로 해결되어야 될 문제중 하나로 잡음환경하에서의 끝점검출을 들 수 있다. 잡음이 존재하지 않는 환경에서는 기존의 에너지 파라미터만으로도 어느정도 신뢰성있는 끝점 구간을 검출할 수 있으나 도심 소음과 같은 실제 잡음환경하에서는 대부분 좋지 않은 결과를 보인다. 본 논문에서는 도심환경의 배경잡음을 제거하는 방법으로 입력되는 음성에 대하여 주변소음에 의해 손상된 음성스펙트럼의 크기 성분만을 제거하는 전처리 기법인 Bark scale에 기반한 스펙트럼 차감법을 사용하고, 인간의 청각특성을 고려하여 음성의 주파수 대역을 3개의 대역으로 분리한 후, 대역별로 세밀한 에너지 문턱치값을 설정하여 음성의 끝점을 탐색하는 방법을 제안한다. 제안한 방법의 유효성을 확인하기 위해 실제 사무실 및 지하철역 등의 잡음환경하에서 녹음된 데이터베이스를 이용하여 끝점검출을 수행한 결과 기존의 에너지와 영교차율을 이용한 방법에 비해 평균 $46\%$의 오차율 감소와 대역에너지만을 사용한 경우에 비해 평균 $17\%$의 오차율 감소를 나타내어 제안한 방법의 유효성을 확인할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.135-141
• /
• 2004

Image interpolation is an image enlargement method that calculates an empty pixel value using the information of given pixel values. Since a natural image is composed of various spatial frequency components, it is difficult for one method to interpolate pixels with various spatial frequencies. In this paper, we propose an image interpolation method using multiple neural networks with spatial frequency characteristic. Input image is segmented according to spatial frequency by local variance, and each segmented image is interpolated using neural network established for spatial frequency band. The proposed method is applied to line doubling that becomes an important part in image interpolation because of deinterlacing. In simulation the proposed algorithm shows the improved PSNR result compared with conventional algorithms and method using single neural network.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.19-25
• /
• 2002

This paper presents novel architectures for power amplifier (PA) relying on 3rd harmonic-tuning technique and dual feeding antenna structure for the isolation of the Tx and the Rx ports. Active integrated antenna (AIA) with power amplifier makes the problem of the isolation between the Tx and the Rx ports occur So, this paper suggests dual feeding and dual resonant structures of the AIA with PA are possible to obtain the high isolation between the Tx and the Rx signals. Dual resonant triangular microstrip antenna, which can replace power amplifier tuning circuit, with slots-loaded and characteristic of the isolation between the Tx and the Rx ports using inset microstrip line feeding and probe feeding methods is proposed and experimentally studied for the case of thin substrate.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.278-278
• /
• 2020

감조하천이 위치한 연안 지역의 경우, 강우 및 태풍과 발생과 동시에 만조위가 겹치게 되면 큰 홍수 피해를 입는 지역이다. 감조하천은 조석의 영향으로 인해 물의 흐름 및 수위가 주기적으로 진동하는 특성을 보이고 있다. 조석 현상은 주로 기조력에 의한 주기적인 운동이 발생하지만, 풍속, 저기압 등의 영향도 함께 포함되어 있다. 연안 지역에 대한 홍수 위험 관리를 위해, 본 연구에서는 연안 지역 내 위치한 조위 관측소의 조위 자료를 주기적인 운동을 보이는 조석 성분과 확률론적인 운동을 보이는 파고 성분으로 분리하고자 하였다. 자료 내 각각 세부적인 특성을 확인하기 위해 주파수 대역별 필터링이 가능한 이산형 웨이블릿 변환을 통해 자료를 6단계로 분해하였다. 분해된 각 성분 별 주기성 및 주파수 분석을 실시하여 조석 성분 및 파고 성분으로 분리하였으며, 최종적으로 자료 내 각각 66% 및 34%의 비중을 차지하고 있음을 확인하였다. 본 연구의 결과를 활용한다면, 파고의 영향을 고려한 연안 지역의 홍수 관리의 기초자료로 활용할 수 있을 것으로 판단된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.501-509
• /
• 2011

Software defined radio(SDR) has a goal that places the analog-to-digital converter(ADC) as near the antenna as possible. But current technique actually can't do analog-to-digital converting about RF band signals. So one method is studying that samples RF band signals to IF band. One of the ways Sub-Sampling technique can convert signals from RF band to IF band without oscillator. If Sub-Sampling technique is used, over 2 bands can convert signals from RF band to IF band. But due to the filter performance in RF band, it is possible to generate interference between signals that is converted in low frequency band. The effect degrades performance. In this paper, we propose one method that uses time division multiplexing(TDM) method as a solution to avoid interference between signals. By doing TDM and Sub-Sampling at the same time that method can get signals without large changes of structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.165-171
• /
• 2004

In this paper, the modeling and design of high-Q multilayer passives have been investigated, and multilayer diplexer for GSM/DCS applications has been designed and fabricated using the passives. Modeling of a multilayer inductor was performed by the subsystems of distributed components, and using the modeling the optimal structures of the high-Q multilayer inductor could be designed by analyzing parasitics and couplings which affect their frequency characteristics. Multilayer diplexers for GSM/DCS applications have been designed and fabricated using LTCC technology. LPF for GSM band had the passband insertion loss of less than 0.55 dB, the return loss of more than 12 dB, and the isolation level of more than 26 dB. HPF for DCS band had the passband insertion loss of less than 0.82 dB, the return loss of more than 11 dB, and the isolation level of more than 38 dB.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.147-149
• /
• 2019

본 논문은 서로 독립적인 무선 전력전송 시스템의 출력들을 단일 PWM을 기반으로 하여 하나의 제어신호로 조절하는 공진형 컨버터의 설계와 구현을 다룬다. 각 출력마다 특정 주파수 범위를 할당하고 할당된 주파수를 가지는 정현파 전압 성분이 각 출력을 조절하는 제어신호로서 생성된다. 생성된 제어신호는 하나의 신호로 중첩되어 인버터 회로의 PWM 신호를 생성한다. 이 신호는 공진형 컨버터의 2차측의 대역통과공진 필터를 통과하면서 분리되어 진폭과 주파수 변조를 통해 출력을 조절한다. 본 논문에서는 4개의 출력을 가진 공진형 컨버터를 가정하였고 하드웨어 프로토타입 제작을 통해 제안하는 내용을 검증하였다.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.49-60
• /
• 2002

Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .