• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.139-147
• /
• 2006

This paper suggests an efficient method of protection ratio calculation and shows some results applicable to frequency coordination in microwave(M/W) relay system networks, and the net filter discrimination(NFD) associated with Tx spectrum mask and overall Rx filter characteristics has been examined to obtain the adjacent channel protection ratio. The protection ratio comprises several factors such as C/N of modulation scheme, noise-to-interference ratio, multiple interference allowance, fade margins of multi-path and rain attenuation, and NFD. According to computed results for 6.7 GHz, 64-QAM, and 60 km at BER $10^{-6}$, fade margin and co-channel protection ratio are 41.1 and 75.2 dB, respectively. NFD for channel bandwidth of 40 MHz reveals 28.9 dB at the first adjacent channel, which results in adjacent channel protection ratio of 46.3 dB. In addition, NFD and protection ratio for different systems with channel bandwidth 20 and 40 MHz have been investigated to be used for actual M/W networks. The proposed method provides some merits of an easy calculation, systematic extension, and applying the same concept to frequency coordination in millimeter wave relay system networks.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.777-783
• /
• 2015

Wood is an anisotropic material that shows the changes in hardness, quality and dimensions depending on the types of cells on three cross sections, size, array and so on. It can also be used in different ways according to its use, which requires a meticulous research, in order to maximize the utilization by understanding the nature and use; and by clarifying the theory and technologies. The research on relationship among wood's physical properties, density, and elasticity of modulus have been studied in Korea and abroad, but those studies were based on correlation gained through standardized specimen. Rather, the study on complete product is rare. Moreover, the previous reports are mostly concentrating on vibration mode and batting, though the wood's physical properties as a material have not been in the main focus. Therefore, this study will carried out for analyzing MOE through figuring material property out and comparing frequency adapting to the Canadian HardMaple bat. For comparison of material properties, we studied the annual ring and density of the bat; calculated the MOE with resonance frequency and formula (ASTM C1259); and verified the repulsive force of this material. As a result, the relevance of the resonance frequency and annual ring is weak, and in comparison in the grain direction in wood, the MOE value is higher when the grain direction in wood is excited horizontally than when is excited vertically, because the material is repulsive when grain direction is horizontal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.594-603
• /
• 2018

Recently, according to the development of measurement techniques, it has become possible to take complicated and time-consuming field measurements in a simple and convenient manner. In this background, this study estimated the tension of cables under ambient vibration using minimized measurement and signal processing. The VBDM using video-only by low-cost equipment was used as a minimized measurement. An estimation of the natural frequency using the mirror frequency concept was also proposed to solve the shortage of frequency band in this case. Furthermore, the FDD method was adopted for a natural frequency estimation in the ambient vibration related to field application. Experimental studies using a cable-stayed bridge model were carried out to examine the properties of the mirror frequency and the applicability of FDD with the proposed minimized system. The results showed that FDD for ambient vibration also works properly in an estimation of the natural frequency using the minimized system. In addition, the mirror frequency concept can allow a high natural frequency estimation even in a distorted signal by low-speed recording, which can overcome the limit of the minimized system. Overall, the proposed minimized system can be effective for the tension estimations of a cable under ambient vibration.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.7-14
• /
• 2008

In this paper, a new high resolution XGA-SLM is implemented through modification of a commercial TFT-LCD beam projector and its optical modulation characteristics as a spatial light modulator(SLM) is also analyzed. That is, the optics module, projection lamp and fans are removed from a commercial beam projector and instead, some electric circuits to compensate their removal are manufactured and then, by inserting them into the beam projector, a new XGA-SLM is finally implemented. From some characteristic experimental results of the implemented high resolution TFT-LCD SLM, the proposed TFT-SLM is found to have an good optical linearity in amplitude and phase modulation characteristics as a function of the input gray levels. Especially, through implementation of the suggested TFT-LCD panel, the implemented SLM is proposed as a new relatively low-cost and high resolution SLM for optical information processing.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.17-23
• /
• 2017

Optical current sensors are suitable for operation in high voltage and high current environments such as power plants due to they are not affected by electromagnetic interference and have excellent insulation characteristics. However, as they operate in a harsh environment such as large temperature fluctuation and mechanical vibration, high reliability of the sensor is required. Therefore, many groups have been working on enhancing the reliability. In this work, an integrated optical current sensor incorporating polarization-rotated reflection interferometer is proposed. By integrating various optical components on a single chip, the sensor exhibits enhanced stability as well as the solution for low-cost optical sensors. Using this, we performed the characterization for the actual field application. By using a large power source, the current of 0.3 kA~36 kA was applied to the photosensor and the linear operation characteristics were observed. The error of the sensor was within $0{\pm}.5%$. Even when operating for a long time, the error range of the sensor was kept within $0{\pm}.5%$. In addition, the measurement of the frequency response over the range of 60 Hz to 10 kHz has confirmed that the 3-dB frequency band of the proposed OCT is well over 10 kHz.

• Annual Conference on Human and Language Technology
• /
• 1994.11a
• /
• pp.57-63
• /
• 1994

인간의 정보처리 과정의 특성을 알아보기 위하여 반구별로 색채와 단어의 처리과정을 분석하였다. 단어와 색깔이라는 두가지 자극 속성이 있는 한 개의 자극에 대하여 각 자극 속성에 대한 판단과정을 반응키를 이용하여 반구별로 알아보았다. 단어에 대한 판단과 색깔에 대한 판단을 반구별로 분석한 결과, 색깔처리나 단어처리에 있어서 반구간 비대칭성은 나타나지 않았으나 색깔에 대한 판단이 단어에 대한 판단보다 신속하게 이루어지는 것으로 나타나 색채가 단어보다 기초적인 자극 속성임을 확인하였다. 단어와 색깔이라는 두가지 자극 속성을 이용한 경우에 한가지 자극속성을 처리할 때 다른 자극속성이 자동적으로 영향을 주는 것으로 나타났으나 그 정도에 있어서 반구간의 차이는 없었다. 그러나 색채가 단어처리를 간섭하는 정도가 단어가 색채처리를 간섭하는 정도보다 큰 것으로 나타나 기존의 스트룹 연구결과들과는 상반되는 결과를 얻었는데 이는 과제의 특성이라는 측면으로 기술되었다. 단어 처리에서 반구간 차이가 발견되지 않은 것은 한글의 시각적 특성과 관련지어 논의되었다. 자극의 한 속성이 자동적으로 다른 속성에 영향을 주지만 그 효과의 크기도 반구별로 차이가 없다는 것은 이전의 반구별 스트룹 효과를 알아본 연구들과 상반되는 결과이다. 따라서 자극속성이 상호영향을 줄 수 있는 좀더 일반적인 상황에서는 한 자극 속성이 다른 자극 속성의 처리에 자동적으로 영향을 주는 효과에서 반구 비대칭성이 발견되지 않으며 스트룹 효과는 두 자극 속성의 관계가 밀접한 특별한 경우에 나타나는 반구비대칭성 효과인 것으로 논의되었다.양 발생과 유의적으로 상관관계가 있었다. 본 연구의 결과는 phenol의 종류에 상관없이 식이 phenol에 조직의 항산화(산화억제)를 통해 암 예방(cancer prevention)에 영향을 미친다는 것을 제시해준다.물을 첨가하여 물내리기를 한 후 김이 오른 후 물내린 쌀가루에 15% 이상의 설탕을 첨가하여 20분간 쪄서 만든 백설기가 가장 바람직하다는 것을 알 수 있었다. 이 실험 중 가장 중요한 조건은 첨가하는 물의 양이 10%이며 첨가하는 당이 설탕일 경우는 김이 오른 후 설탕을 섞어 바로 쪄야 하며 설탕의 양이 15% 이상이라는 것이다. 이 조건은 대체적으로 hardness, adhesiveness, gumminess가 큰 수치를 나타낸다.순구조의 Tonpilz형 초음파 변환기와 비교하여 비록 송파전압감도에 있어서는 약 5 dB 정도의 음향출력의 손실이 불가피하지만, 그 대신 주파수 대역폭을 약 5 재 정도 확대시킬 수 있는 장점이 있기 때문에 이 넓은 주파수 대역을 효과적으로 활용하면 어종식별을 위한 음향산란신호를 정량적으로 수집 및 평가하는 것이 가능하다고 판단된다.n A was 11 ug.이, 0.9 ug/g and 3.7 ug/g in the blood, liver and kidney, respectively.sional-managerial who secure the higher autonomy and stability in their work have the highest life chance in the labor and health, and leisure life

• Journal of Internet Computing and Services
• /
• v.19 no.6
• /
• pp.63-72
• /
• 2018

The human voice is one of the easiest methods for the information transmission between human beings. The characteristics of voice can vary from person to person and include the speed of speech, the form and function of the vocal organ, the pitch tone, speech habits, and gender. The human voice is a key element of human communication. In the days of the Fourth Industrial Revolution, voices are also a major means of communication between humans and humans, between humans and machines, machines and machines. And for that reason, people are trying to communicate their intentions to others clearly. And in the process, it contains various additional information along with the linguistic information. The Information such as emotional status, health status, part of trust, presence of a lie, change due to drinking, etc. These linguistic and non-linguistic information can be used as a device for evaluating the individual's credit worthiness by appearing in various parameters through voice analysis. Especially, it can be obtained by analyzing the relationship between the characteristics of the fundamental frequency(basic tonality) of the vocal cords, and the characteristics of the resonance frequency of the vocal track.In the previous research, the necessity of various methods of credit evaluation and the characteristic change of the voice according to the change of credit status were studied. In this study, we propose a personal credit discriminator by machine learning through parameters extracted through voice.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.798-804
• /
• 2013

In this paper, conducted emission from the LDC(Low-Side DC/DC Converter) of a HEV/EV was analyzed using high-frequency circuit modeling in system-level approach. The conducted emission by PWM process(100 kHz; Switching Frequency) can cause RFI(Radio-Frequency Interference) problems in the AM/FM frequency range. In order to mitigate this conducted emission, a high-frequency equivalent circuit model is proposed by analyzing the fundamental circuits, parasitic components in their parts and connections and non-linear characteristics of MOSFETs, high-power capacitors, inverters, motors, high-power cables, and bus bars which are composed of the LDC. Using these circuit models, results of both simulation and measurement were compared and similarities between them were verified. We are looking forward that this approach can be effectively used in the EMC design of HEV/EV.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.23-33
• /
• 1996

In this paper we point out that if the classical principal domain for bispectra is utilized to determine a second-order Volterra model's output, such and output will be incomplete. This deficiency is associated with the periodic nature of the DFT. For this reason, the objective of this paper is to present an "extended" principal domain for Volterra kernels which leads to an improved estimate of the nonlinear system's response. In order to define the extended principal domain, we derive a new discrete frequency-domain Volterra model from a discrete time-domain Volterra model utilizing 2-dimensional DFT and the relationship between the quadratic component of the Volterra model and a square filter. The effect of the extended domain on the model output is interpreted in terms of the periodicity of DFT. Through computer simulations, we demonstrate the effects of the extended principal domain on the Volterra modeling. The simulation results indicate that the extended principal domain plays and important role in computing Volterra model outputs and estimating Volterra model coefficients.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.1-10
• /
• 2010

As processor platforms are continuously moving toward wireless mobile systems, embedded mobile processors are expected to perform more and more powerful, and therefore the development of an efficient power management algorithm for these battery-operated mobile and handheld systems has become a critical challenge. It is well known that a memory system is a main performance limiter in the processor point of view. Although many DVFS studies have been considered for the efficient utilization of limited battery resources, recent works do not explicitly show the interaction between the processor and the memory. In this research, to properly reflect short/long-term memory access patterns of the embedded workloads in wireless mobile processors, we propose a memory buffer utilization as a new index of DVFS level prediction. The simulation results show that our solution provides 5.86% energy saving compared to the existing DVFS policy in case of memory intensive applications, and it provides 3.60% energy saving on average.