• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.3
• /
• pp.183-196
• /
• 2010

Increasing human activity due to rapid economic growth and land use change alters the patterns of the Asian monsoon, which is key to crop yields in Asia. In this study, we tested the performance of regional climate model (RegCM3) by simulating important components of Indian summer monsoon, including land-ocean contrast, low level jet (LLJ), Tibetan high and upper level Easterly Jet. Three contrasting rain years (1994: excess year, 2001: normal year, 2002: deficient year) were selected and RegCM3 was integrated at 60 km horizontal resolution from April 1 to October 1 each year. The simulated fields of circulations and precipitation were validated against the observation from the NCEP/NCAR reanalysis products and Global Precipitation Climatology Centre (GPCC), respectively. The important results of RegCM3 simulations are (a) LLJ was slightly stronger and split into two branches during excess rain year over the Arabian Sea while there was no splitting during normal and deficient rain years, (b) huge anticyclone with single cell was noted during excess rain year while weak and broken into two cells in deficient rain year, (c) the simulated spatial distribution of precipitation was comparable to the corresponding observed precipitation of GPCC over large parts of India, and (d) the sensitivity experiment using NIMBUS-7 SMMR snow data indicated that precipitation was reduced mainly over the northeast and south Peninsular India with the introduction of 0.1 m of snow over the Tibetan region in April.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.428-437
• /
• 2017

Recently, local government has established a development strategy which takes into account the quality of each area, in order to solve the problems posed by poor development, hindrance of the urban landscape, the limits imposed by relevant laws, etc. However, the number of floors is an important factor which determines the urban landscape, planning density and quality of the external space. This planning factor has a very different effect according to the terrestrial circumstances, number of households, underparking ratio, green space ratio and floor area ratio. Therefore, in this study, a case analysis and case study are conducted and the correlation between each index is clarified. The conclusions of this study are follows. Firstly, flexibility should be ensured by taking into consideration the density indicators, average number of floors, and residential environmental performance measures in related laws and systems. Secondly, it is necessary to develop a wide-area planning method that extends the planning concept from the beginning of planning to neighboring blocks or cities. Thirdly, deregulation measures should be implemented, such as establishing specialized strategies for each region, and regulatory measures for encouraging different types of development.

• Journal of Internet Computing and Services
• /
• v.22 no.2
• /
• pp.29-39
• /
• 2021

As damages to individuals, private sectors, and businesses increase due to newly occurring cyber attacks, the underlying network security problem has emerged as a major problem in computer systems. Therefore, NIDS using machine learning and deep learning is being studied to improve the limitations that occur in the existing Network Intrusion Detection System. In this study, a deep learning-based NIDS model study is conducted using the Convolution Neural Network (CNN) algorithm. For the image classification-based CNN algorithm learning, a discrete algorithm for continuity variables was added in the preprocessing stage used previously, and the predicted variables were expressed in a linear relationship and converted into easy-to-interpret data. Finally, the network packet processed through the above process is mapped to a square matrix structure and converted into a pixel image. For the performance evaluation of the proposed model, NSL-KDD, a representative network packet data, was used, and accuracy, precision, recall, and f1-score were used as performance indicators. As a result of the experiment, the proposed model showed the highest performance with an accuracy of 85%, and the harmonic mean (F1-Score) of the R2L class with a small number of training samples was 71%, showing very good performance compared to other models.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.27-35
• /
• 2023

In this paper, we propose a process of increasing productivity by applying a deep learning-based defect detection and classification system to the prepreg fiber manufacturing process, which is in high demand in the field of producing composite materials. In order to apply it to toe prepreg manufacturing equipment that requires a solution due to the occurrence of a large amount of defects in various conditions, the optimal environment was first established by selecting cameras and lights necessary for defect detection and classification model production. In addition, data necessary for the production of multiple classification models were collected and labeled according to normal and defective conditions. The multi-classification model is made based on CNN and applies pre-learning models such as VGGNet, MobileNet, ResNet, etc. to compare performance and identify improvement directions with accuracy and loss graphs. Data augmentation and dropout techniques were applied to identify and improve overfitting problems as major problems. In order to evaluate the performance of the model, a performance evaluation was conducted using the confusion matrix as a performance indicator, and the performance of more than 99% was confirmed. In addition, it checks the classification results for images acquired in real time by applying them to the actual process to check whether the discrimination values are accurately derived.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.163-171
• /
• 2024

Structural health monitoring for ships and offshore structures is important in various aspects. Ships and offshore structures are continuously exposed to various environmental conditions, such as waves, wind, and currents. In the event of an accident, immense economic losses, environmental pollution, and safety problems can occur, so it is necessary to detect structural damage or defects early. In this study, structural response data of multi-linked floating offshore structures under various wave load conditions was calculated by performing fluid-structure coupled analysis. Furthermore, the order reduction method with distortion base mode was applied to the structures for predicting the structural response by using the results of numerical analysis. The distortion base mode order reduction method can predict the structural response of a desired area with high accuracy, but prediction performance is affected by sensor arrangement. Optimization based on a genetic algorithm was performed to search for optimal sensor arrangement and improve the prediction performance of the distortion base mode-based reduced-order model. Consequently, a sensor arrangement that predicted the structural response with an error of about 84.0% less than the initial sensor arrangement was derived based on the root mean squared error, which is a prediction performance evaluation index. The computational cost was reduced by about 8 times compared to evaluating the prediction performance of reduced-order models for a total of 43,758 sensor arrangement combinations. and the expected performance was overturned to approximately 84.0% based on sensor placement, including the largest square root error.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.404-411
• /
• 2022

The main function in operating the satellite navigation system is to accurately determine the orbit of the navigation satellite and transmit it as a navigation message. In this study, we developed software to determine the orbit of a navigation satellite by combining an extended Kalman filter and an accurate dynamic model. Global positioning system (GPS) and quasi-zenith satellite system (QZSS) orbit determination was performed using international gnss system (IGS) ground station observations and user range error (URE), a key performance indicator of the navigation system, was calculated by comparison with IGS precise ephemeris. When estimating the clock error mounted on the navigation satellite, the radial orbital error and the clock error have a high inverse correlation, which cancel each other out, and the standard deviations of the URE of GPS and QZSS are small namely 1.99 m and 3.47 m, respectively. Instead of estimating the clock error of the navigation satellite, the orbit was determined by replacing the clock error of the navigation message with a modeled value, and the regional correlation with URE and the effect of the ground station arrangement were analyzed.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.3
• /
• pp.139-148
• /
• 1995

The test results from three one fourth scale models using high strength Reinforced Concrete $f_x=704\;kg/cm^2,\;f_y=5.830\;kg/cm^2$ are presented. Such specimens are considered to represent the critical 3 storics of 60-story tall building of a structural wall system in area of high seismicity respectively. They are tested under inplane vertical and horizontal loading. The main varlable is the level of axial stress. The amounts of vertical and horizontal reinforcement are identical for the three walls testcd. The cross-section of all walls is barbell shape. The aspectratio($h_w/I_w$) of test specimen is 1.8. The aim of the study is to investigate the effects of levels of applied axial stresses on the inelastic behavior of high-strength R /C tall walls. Experimental results of high strength R /C tall walls subjected to axial load and simulated sels rnic loading show that it is possible to insure a ductlle dominant performance by promotmg flex ural yielding of vertical reinforcement and that axial stresses within $O.21f_x$ causes an increase in horizontal load-carrying capacity, initial secant st~ffness characteristics, but an decrease in displacement ductility. energy dissipation index and work damage index of high strength K /C tall walls

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11a
• /
• pp.65-68
• /
• 2003

본 논문에서는 가장 최근의 동영상 표준인 H.264에서 가변 블록 움직임 예측 시 인접한 블록과의 상관성을 분석하여 병합 절차를 추가함으로써 매크로블록의 최종 모드를 결정하는 시간을 줄이기 위한 알고리즘을 제안한다. H.264에서는 매크로블록의 모드를 결정하기 위하여 총 7가지 모드를 사용하여 움직임 예측은 실시함으로써 부호화 효율을 극대화시킨 반면 이러한 움직임 예측이 부호화기의 복잡도를 높이는 주요 요인으로 현재 커다란 단점으로 지적되고 있다. 본 논문에서는 $8{\times}8$ 움직임 예측이 끝난 후 인접한 두 블록 사이의 거리론 임계값(Threshold)과 비교하여 다음 모드의 움직임 예측의 실시 여부를 먼저 절정함으로써 필요한 움직임 예측에 소비되는 시간을 단축시켰다. 여기서 실험 조건으로 명시하고 있는 것은 대표적인 단일모드 중에서 수행 성능이 가장 좋은 $8{\times}8$ 모드를 기본모드로 사용하고 병합 시 $16{\times}16$ 모드 쪽으로 상향식(bottom-up) 방법의 병합을 수행해 나아간다 모의실험을 통해 수행 성능과 전체 부호화 시간 측면을 본 논문에서 제안한 방법과 4가지 모드인 $16{\times}16,\;16{\times}8,\;8{\times}16,\;8{\times}8$ 모드를 모두 사용한 경우, $8{\times}8$ 단일모드를 사용한 경우를 비교하였다. 실험 결과 $8{\times}8$ 단일모드보다 수행 성능이 향상되었으며, 시간 단축 면에서 제안한 방법이 4가지 모드인 $16{\times}16,\;16{\times}8,\;8{\times}16,\;8{\times}8$ 모드를 모두 사용한 경우와 $8{\times}8$ 단일모드를 사용한 경우보다 계산 시간이 감소하였음을 확인하였다.행중인 MoIM-Messge서버의 네트워크 모듈로 다중 쓰레드 소켓폴링 모델을 적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확산적 사고의 요소인 유창성, 독창성, 유연성 등에 각각 어떤 영향을 미치는지 20주의 프로그램을 개발, 진행하여 그 효과를 검증하고자 한다. 개방형 문

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.278-281
• /
• 2018

The early Web technology was to show text information through a browser. However, as web technology advances, it is possible to show large amounts of multimedia data through browsers. Web technologies are being applied in a variety of fields such as sensor network, hardware control, and data collection and analysis for big data and AI services. As a result, the standard has been prepared for the Internet of Things, which typically controls a sensor via HTTP communication and provides information to users, by installing a web browser on the interface of the Internet of Things. In addition, the recent development of web-assembly enabled 3D objects, virtual/enhancing real-world content that could not be run in web browsers through a native language of C-class. Factors that evaluate the performance of existing Web applications include performance, network resources, and security. However, since there are many areas in which web applications are applied, it is time to revisit and review these factors. In this thesis, we will conduct an analysis of the factors that assess the performance of a web application. We intend to establish an indicator of the development of web-based applications by reviewing the analysis of each element, its main points, and its needs to be supplemented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.182-188
• /
• 2016

A decoy is a weapon system that can protect vessels from an enemy's torpedo. Thus, the decoy should be able to operate in the field without any failure. Because the decoy can be inoperable once its sealing is broken and water permeates inside the system, the hermetic sealing capability considering the operational environment is mandatory. To be hermetically sealed, a rubber-type O-ring is generally used in a decoy system. The sealed performance of rubber-type products, however, tends to age and deteriorate with time. Therefore, the O-ring needs to be maintained or changed periodically. This paper proposes a method to estimate the proper maintenance period using the hardness and elongation percentage, which represents the performance of the O-ring product and test data from Accelerated Life Test (ALT) of the product. The O-ring used in this paper is a NBR type, and the temperature was chosen to be the main accelerating factor as referenced in many studies. The criteria for the failure of the O-ring was set for the product to be 50% degraded compared to the initial performance. In addition, the Korean standard KS M 6518 was adopted and referenced for the preparation of test samples and the calculation of estimates. The O-ring's predicted life was simulated by analyzing the test results from a computer program, and the optimized maintenance period for the product was determined.