• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2080-2083
• /
• 2003

본 논문에서는 움직임이 존재하는 부분의 사선 방향 보간 성능을 개선하여 기존의 움직임 적응형 3 차원 순차 주사화 알고리즘 기법을 개선한 순차 주사화 방법을 제안하였다. 움직임 적응형 3 차원 순차 주사화를 위하여 밝기 형태 패턴(brightness profile pattern)을 이용하여 필드간의 움직임 정보를 좀 더 정확하게 추출할 수 있었으며 움직임이 있는 부분의 경우 에지의 방향 정보를 이용하여 사선 방향 보간을 수행함으로써 전체적인 순차 주사 변환 화질을 개선할 수 있었다. 제안된 알고리즘을 하드웨어로 구현하여 다양한 동영상에 대해서 성공적으로 적용됨을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1984.07a
• /
• pp.302-305
• /
• 1984

전자계산기 홀로그램을 이용한 Over-filled 주사장치를 구성하고 주사특성을 측정하였다. 그 결과 주사거리는 40cm 정도이고, $100{\mu}m$ 정도의 해상도를 가지며, 회전면의 흔들림에 대해서도 안정함을 보여 주었다.

• Journal of Korea Multimedia Society
• /
• v.4 no.6
• /
• pp.570-578
• /
• 2001

Boundary scan architecture test methodology was introduced to facilitate the testing of complex printed circuit board. The boundary scan architecture has a tremendous potential for real time monitoring of the operational status of a system without interference of normal system operation. In this paper, a new type of embedded controller for real time monitoring of the operational status of a system is proposed and designed by using boundary scan architecture. The proposed real time monitoring embedded controller consists of test access port controller and an embedded controller proposed real time monitoring embedded controller using boundary scan architecture can save the hard-wire resource and can easily interface with boundary scan architecture chip. Experimental results show that the real time monitoring using proposed embedded controller is more effective then the real time monitoring using host computer.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.153-158
• /
• 1993

It is important to establish the transformational relation between scanned image coordinates and digital image coordinates because the coordinate system of digital image is transformed from scanned image coordinate system through scanning work. And, some researches are required in scanning works to correct the deformation that is due to the motion of scanner. In this study, some procedures are applied to determine the optimal calibration model equation which can calibrate the scanner. As a result the optimal calibration model equation for the object scanner is determined The procedure of this study can applied to the calibration of other types of scanner, because the procedures are done with the analysis of geometrical properties rather than the analysis of physical properties.

• Korean Journal of Weed Science
• /
• v.6 no.2
• /
• pp.130-133
• /
• 1986

Glyphosate and 2,4-D were introduced into the vascular systems of Robinia pseudo-acacia L. (3-5cm diameter) with a syringe-type pressure injector in May, 1985. Robinia pseudo-acacia L. were completely controlled by 3 or 6 ml of 3050ppm glyphosate per tree and 6ml of 1000ppm 2,4-D per tree. Herbicidal efficacy was more effective by 6m1 of combined solutions of 1525ppm glyphosate and 500ppm 2,4-D per tree.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.395-400
• /
• 2020

Between October 2019 and January 2020, 120EA of a syringe that was equipped with a 3-way injection material and administered ^99mTc labeled compound among inpatients for SPECT examination at the Department of Nuclear Medicine at Daegu P Hospital. When using a plastic syringe, the average dosing rate according to the number of dilutions was ^99mTc-ECD the highest at 90.87±11.08, and ^99mTc-DMSA the lowest at 75.28±7.43. The average dose rate according to the number of dilutions was the highest at 93.58±7.96, and the lowest at ^99mTc-DMSA at 91.60±6.07. The independent sample t-test showed whether the difference between the ^99mTc-DMSA plastic syringe and the normjek syringe was statistically significant(p<0.01). The ^99mTc-DMSA used for radiopharmaceuticals is a radiopharmaceutical that is mainly used for pediatric patients, and it is considered that it is necessary to use a normjek syringe rather than a general plastic syringe because the precise dosage is important.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.359-385
• /
• 2005

Red ocher, red lead or cinnabar has been as red colorant for ages. Cinnabar of the red pigments has been highly regarded as a valuable ingredient because it represent a symbol of exorcising and a haute image. It was used as a pigment of painting and mural painting, bowl, clothes, rock writing, gravestone, etc. It is powder which dissolves in perilla oil or glue before using. Because it is high-priced, the use of cinnabar may be limited to the privileged class. Therefore, red ocher or red lead was used instead of cinnabar. "Gongsagyunmunrok" demonstrated that government official's gravestonea has been painted red by two colorants in the period of the Goryeo dynasty. However, cinnabar may be used to paint gravestones for the first time in the period of the Three States because it has been transmitted since the times. This study discuss the results obtained from an analysis of the pigments used on the red pigments of the Stone Monuments. The results can be briefly summarized as below; First, the microcrystalline structures seen on the surface section of analyzed pigments, samples of which were taken from various parts of red pigments show that different sizes and shapes of pigment particle. Second, a result of the analysis on the composition and structure of the pigments shows that the main components in their composition are : Red pigments - Red lead($Pb_3O_4$), Cinnabar(HgS) and Hematite($Fe_2O_3$) White pigments - Calcite($CaCO_3$) Especially, we knew that red Stone Monuments were found to be natural mineral pigments, which were used as a singular or a mixture.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.94.2-94.2
• /
• 2015

주사전자현미경은 나노 크기의 재료 및 바이오 물질의 이미지를 관찰하는 가장 일반적인 분석 장비이다. 주사전자현미경을 이용한 시료 관찰은 주로 10-5 Torr 이하의 고진공에서 이루어진다. 부도체 재료는 전자빔에 의해 대전(charging)이 발생하여 이미지가 왜곡되며, 이를 방지하기 위해 금 등의 금속을 코팅한다. 한편 10-1 Torr 이상 압력의 저진공에서는 부도체 재료도 charging이 발생하지 않아 생물시료등의 부도체 표면을 코팅없이 관찰할 수 있다. 본 발표에서는 현재 개발중인 저진공 관찰 주사전자현미경의 차동배기구조를 보여준다. 또한 차동배기에 의해 가동 압력 10-1 Torr 이상의 시료실과 10-5 Torr이하의 전자총실의 진공 배기특성을 보고하며, 저진공에서의 주사전자현미경 이미지를 보여준다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2001.11b
• /
• pp.143-146
• /
• 2001

HDTV(high-definition television)와 개인용 컴퓨터의 발전에 따라 비월주사(interlaced scanning) 방식의 신호와 순차주사(progressive scanning) 방식의 신호 상호간의 변환에 대한 요구가 점점 늘어나고 있다. 이에 따라 비월주사 방식을 순차주사 방식으로 바꾸어주는 순차주사화(deinterlacing)가 활발히 연구되고 있다. 본 논문에서는 부화소(sub-pixel) 단위의 움직임 정보를 고려한 영상재결합 방법을 기반으로 한 순차주사화 알고리즘을 제안한다. 그러나 국부 움직임이 있는 영역에서는 영상재결합이 효과적이지 않으므로 적절한 문턱값을 이용하여 이러한 영역을 결정하고 에지를 이용한 보간 방법으로 순차주사화 한다. 또한 잘못된 움직임 추정으로 야기되는 문제들을 해결하기 위해, 각 영역과 입력 영상에 따라 다른 움직임 에러를 고려해서 정규화 값(regularization parameter)을 결정함으로 움직임 에러를 효율적으로 제거하였다 제안된 방법은 주관적 측면과 객관적인 측면에서 모두 우수한 결과를 실험적으로 보였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.115-121
• /
• 2004

GenJTAG implemented in this paper is an automatic web-based boundary scan circuit generator. GenJTAG supports all the public instructions for the boundary scan technique, and also private instructions for other DFT techniques to be applied. Users can easily edit the generated boundary scan circuit code because it is described in behavioral level with the Verilog-HDL. GenJTAG has another advantage that any one can generate the boundary scan circuit by simply accessing to the web site.