• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1037-1040
• /
• 2002

In micro-stereolithography technology, fabrication conditions that include laser power, laser scan speed, laser scan pitch, and material property of photopolymer such as penetration depth and critical exposure are considered as major process variables. But the existing scan path generation methods based only on CAD model have not taken them into account, which has resulted in cross-section dimension of low accuracy. Thus, to enhance cross-section dimensional accuracy, the physical resin solidification n phenomena should be reflected in laser scan path generation and stage operating code. In this paper, multi-line experiments based on single line solidification model are performed. And the method for improving cross-section dimensional accuracy is presented, which is to apply the database based on experimental results to laser scan path generation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.541-542
• /
• 2007

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.19-26
• /
• 2008

• Korean Journal of Health Education and Promotion
• /
• v.5 no.1
• /
• pp.1-5
• /
• 1988

AIDS란 성적 접촉에 의하여 사람에서 사람에게로 전염되었거나 금지된 마약이나 각성제등의 정맥주사에 쓰이는 주사기나 주사침을 공용하여 전염되는 것이 주인 감염경로에 의하여 일어나는 일련의 병의 최종적인 상태를 말한다. 1981년6월5일자 MMWR지에 실린 미국 로스엔젤레스지역 5명의 남성동성애자에 발생된 카리니폐염의 보고가 첫 보고증예이나, 이보다 앞선 2년반사이에 미국의 뉴욕주와 캘리포니아주에서 남성동성애자에서 카포시육종이나 카리니폐염환자가 발생되었었음이 알려져 이 병이 주목받게 되었다.

• RED RIBBON
• /
• s.43
• /
• pp.28-29
• /
• 2001

실제 감염인은 2명 이상임을 의미하고 마약사용자들간에도 상당수의 감염인이 있을 수 있음을 의미한다. 이는 과거에 비해 에이즈가 전파될 수 있는 감염경로는 훨씬 다양해졌음을 의미한다. 즉 마약사용 주사기뿐만 아니라 인터넷을 통한 번개섹스, 청소년 매매춘(원조교제), 노래방, 증기탕 등을 통한 주부매춘, 노인 매매춘 등으로 감염경로가 넓어졌다.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.132-139
• /
• 2008

In scanning laser optical tweezers, high speed scanning stages are used to manipulate a laser beam spot. Due to the inertia of the stage, the output scanning signal decreases with increased frequency of the input signal. This discrepancy in the signals is difficult to observe since most of the energy from the laser beam is blocked out to avoid CCD damage. In this paper, we propose two methods to alleviate these problems. Firstly, frequency responses of piezo stages are measured to analyze the signal drops and the input signal is compensated accordingly. Secondly, an overlay of the scanning path is drawn on the live monitoring screen to enhance the visibility of the scanning path. The result is a drop-compensated scanning with clear path view.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.308-308
• /
• 2004

쾌속조형기술은 설계형상의 확인, 시작품의 제작, 금속 및 세라믹 부품에의 응용, 동시공학, 의료, 마이크로 머신 둥 제조업 전반에 걸쳐서 많은 응용이 이루어지고 있다 여러 가지의 기술들이 개발되고 이를 응용한 장비들이 생산되어 보급됨으로써 이러한 적용분야들은 점차 확대되고 있다. 본 연구에서는 분말을 소결, 적층하여 원하는 형상을 만들어내는 SLS(Selective Laser Sintering) 장비를 개발하는데 있어서 레이저 경로의 제어를 통한 분말을 소결시키는 부분인 레이저 주사 시스템(laser scanning system)을 개발하고자 한다.(중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.730-742
• /
• 2014

In the case of On-demand routing protocol in cognitive radio ad-hoc networks, broadcasting of control packets may occur common control channel overload and packet collisions during the routing procedure. This situation is to increase the overhead of path finding and also limited to find the accurate and reliable path. Since reliable channel and path finding is restricted, path life time is shorten and path reliability is reduced. In this paper, we propose a new routing algorithm that reduces control channel overhead and increases path life time by considering the probability of appearance of primary user and channel status of neighbor nodes. Each node performs periodic local sensing to detect primary user signal and to derive primary user activity patterns. The probability of primary appearance on the current channel and the channel status can be obtained based on the periodic sensing. In addition, each node identifies the quality of the channel by message exchange through a common channel with neighbor nodes, then determines Link_Levels with neighbor nodes. In the proposed method, the Link Level condition reduces the number of control messages that are generated during the route discovery process. The proposed method can improve path life time by choosing a path through Path_Reliability in which stability and quality are weighted depending on the location. Through simulation, we show that our proposed algorithm reduces packet collisions and increases path life time in comparison with the traditional algorithm.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.76-85
• /
• 2014

When conscious and unconscious exploring information of space-visitors which is contained in the information acquired in the process of seeing any space is analyzed, it can be found what those visitors pick up as factors in the space for its selection as visual information in order to put it into action. This study, with the object of the space reproduced in three dimensions from the cafe which was visited for conversation, has analyzed the process of acquiring space-information by sex to find out the features of scanning path, findings of which are the followings. First, the rate of scanning type of males was "Combination (50.5%)- Circulation (31.0%) and that of females "Horizontal (32.5%) - Combination (32.1%)", which shows that there was a big difference by sex in the scanning path which took place in the process of observing any space. Second, when the features of continuous observation frequency by sex is looked into, the trends of increased "horizontal" scanning and decreased "Combination" scanning of both showed the same as the frequency of continuous observations increased, while in case of "Circulation" scanning, that of females was found to decrease but that of males showed the aspect of confusion. Third, the 'Combination' scanning of males was found strong at the short observation time with three times of continuous observation frequency defined as "Attention Concentration" while the distinct feature was seen that the scanning type was dispersed to "combination-circulation" as the frequency of continuous observation increased. Females start the information acquirement with "combination-circulation" but in the process of visual appreciation they showed a strong "Horizontal" These scanning features can be defined as those by sex for acquiring space information and therefore are very significant because they are fundamental studies which will enable any customized space-design by sex.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1295-1298
• /
• 2004

Selective Laser Sintering(SLS) method is one of Rapid Prototyping(RP) technologies. It is used to fabricate desirable part to sinter powder and stack the fabricated layer. To develop this SLS machine, it needs effective scanning path and the development of scanning device. This paper shows how to make fast scanning path with respect to scan spacing, laser beam size and scanning direction from 2-dimensional sliced file generated in commercial CAD/CAM software. Also, we develop the scanning device and its control algorithm to precisely follow the generated scanning path. Scanning path affects precision and total machining time of the final fabricated part. Sintering occurs using infrared laser which has high thermal energy. As a result, shrinkage and curling of the fabricated part occurs according to thermal distribution. Therefore, fast scanning path generation is needed to eliminate the factors of quality deterioration. It highly affects machining efficiency and prevents shrinkage and curling by relatively lessening the thermal distribution of the surface of sintering layer. To generate this fast scanning path, adaptive path generation is needed with respect to the shape of each layer, and not simply x, y scanning, but the scanning of arbitrary direction must be enabled. This paper addresses path generation method to focus on fast scanning, and development of scanning system and control algorithm to precisely follow generated path.