• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.11-18
• /
• 1991

Stiffened plate structure, which is generally used in the various structural design to develope the load carrying capacity, is classified in two groups; one is the plate stiffened with stiffeners, the other is corrugated plate. In the studies on those structures, the studies on the stiffened plates with stiffeners have been much studied with both quantities and qualities according to requirements of the minimum-weight structural design and the development in many industrial fields, especially automobile, ship and aerospace fields, but the studies on the corrugated plates are undeveloped in comparison with the stiffened plates, and also the analytical stiffness on the corrugated plates remains as the imperfect. In the present studies, the analytical method on the stiffness of corrugated plates made by folding is proposed, and the stiffness equation of corrugated plates with some angle is derived and generalized. The purpose of the present study is to contribute to the design of corrugated plates and to determine the optimum aspect ratio for parameters that decide the aspect of corrugated plates.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.11-20
• /
• 2014

This paper aims at comparing and analyzing shear buckling characteristics between sinusoidal corrugation shape and trapezoidal one. For this, I adopted the equal-length trapezoidal corrugation and sinusoidal one for the analytical models, and analyzed their shear buckling characteristics through linear buckling analysis and on its theory. Generally, the shear buckling shapes of corrugated steel plates are classified into local buckling, global buckling, and interactive buckling from the two buckling modes. Sinusoidal corrugation shape, unlike trapezoidal corrugation, does not have flat sides, which causes another tendency in shear buckling mode. Especially, the changes and different aspects of shear buckling on the boundary between local buckling and global buckling appear in different corrugation shapes. According to the analysis results, interactive buckling mode appeared on the boundary of local buckling and global bucking in trapezoidal corrugation. However, in the case of corrugated steel plates with sinusoidal configuration, interactive buckling mode appeared in the part where global bucking takes place. Besides, trapezoidal shapes are of advantages on shear buckling resistance in the local buckling section, and so are sinusoidal shapes in the global buckling section.

• Journal of the Korean Institute of Gas
• /
• v.13 no.4
• /
• pp.22-26
• /
• 2009

In this paper, the displacement behavior and strain energy density characteristics of a safety helmet with various corrugation dampers has been analyzed based on the finite element analysis. The safety helmet is to protect impact forces and to absorb the impact energy. Three different helmet models with a corrugation damper have been compared as functions of the displacement and strain energy density characteristics when the maximum external impulsive force is imposed on the summit of the helmet. The computed FEM results show that the extruded corrugation damper is very useful to increase the damping effect of the helmet. This study indicates that the round corrugation damper may absorb the transferred impact energy successfully. Thus, this paper recommends round and long corrugation damper on the lower part of the helmet as a new design element.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2012

Numerical analysis has been carried out to investigate the fully developed flow and heat transfer characteristics of a plate heat exchanger. Multi-cell models with an inlet part and outlet part are used to perform the numerical simulation. The plate heat exchanger is characterized by a chevron angle of $20^{\circ}$ and a P/H ratio of 2.0~4.0. The working fluid is water and the Reynolds numbers range from 300 to 1,500. The correlation is given in the form of $f=CRe^m$ for the friction factor and $j=CRe^m$ for the Colburn factor. It is found that the fully developed flow starts from the third cell and the Nusselt number increases with decreasing P/H ratios.

• Journal of KIISE:Software and Applications
• /
• v.32 no.3
• /
• pp.181-191
• /
• 2005

This article describes a simplified mathematical model and the relevant numerical algorithm to simulate the draped cloth on virtual human body. The proposed algorithm incorporates an elliptical, or non-consecutive, method to simulate the cloth wrinkles on moving bodies without resorting to the result of the past time-steps of drape simulation. A global-local analysis technique was employed to decompose the drape of cloths into the global deformation and the local wrinkles that will be superposed linearly The global deformation is determined directly by the rotation and the translation of body parts to generate a wrinkle-free yet globally deformed shape of cloth. The local wrinkles are calculated by solving simple elliptical equations based on the orthogonality between conjugate harmonic functions representing the wrinkle amplitude and the direction of wrinkles. The proposed method requires no interpolative time frames even for discontinuous body postures. Standing away from the incremental approach of time integration in conventional methods, the proposed method yields a remarkable reduction of CPU time and an enhanced stability. Also, the transient motion of cloth could be achieved by interpolating between the deformations corresponding to each static posture.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.11
• /
• pp.919-926
• /
• 2014

In this paper, the effect of material properties on fracture behavior was studied using cohesive zone model and extended finite element method. The rectangular tensile specimen with a central inclined initial crack was modeled by plane stress elements. In the CZM modeling, cohesive elements were inserted between every bulk elements in the predicted crack propagation region before analysis, while in the XFEM the enrichment to the elements was added as needed during analysis. The crack propagation behavior was examined for brittle and ductile materials. For thin specimen configuration, wrinkle deformation was accounted for by geometrically nonlinear post-buckling analysis and the effect of wrinkling on the crack propagation was investigated.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.192-195
• /
• 2008

본 논문에서는 발전하는 3D 그래픽스 기술을 이용하여 문화재의 도면 실루엣을 생성하는 방법을 제안하고자 한다. 3D 스캐너로 정밀 실측된 3D 데이터를 이용하여 문화재의 도면을 생성하기 위한 벡터 실루엣(Silhouette) 추출 과정은 다음과 같다. 먼저 실측된 3D 데이터를 정규화 된 3D공간으로 이동하고, 이동 후에는 데이터에 존재하는 모든 에지(edge)를 검출하여 에지리스트(edge list)를 생성한다. 생성된 에지리스트는 다시 윤곽에지(Contour edge)와 주름에지(Crease edge)로 분류하는데, 윤곽에지는 문화재의 윤곽 실루엣을 형성하는데 이용하고, 윤곽에지를 제외한 주름에지는 문화재의 표면 특징을 나타내는 내부문양 실루엣을 형성하는데 이용한다. 내부문양 실루엣은 사용자가 입력하는 임계값과 주름에지를 구성하는 두면의 방향 벡터의 내적을 비교하여 추출한다. 추출한 벡터 실루엣은 윤곽 실루엣과 내부문양 실루엣으로 구분되며, 두 벡터 실루엣을 이용함으로써 문화재의 구조적 해석과 표면의 특징을 해석할 수 있는 도면 실루엣 생성이 가능했다.

• Journal of the Korean Institute of Gas
• /
• v.15 no.4
• /
• pp.39-43
• /
• 2011

In this study, the stress and deformation behavior characteristics of a flexible joint for a gas pipe have been analyzed by a finite element method. These characteristic results may investigate the strength safety analysis of a flexible joint, which is composed by a spiral corrugation pipe or a rectangular corrugation model and a plane pipe. The FEM computed results show that an optimized spiral corrugation pipe model is a inclined angle of $4.7^{\circ}$ and a corrugation height of 1.5mm. And also, a rectangular corrugation pipe model of $90^{\circ}$ is recommended in strength safety rather than a spiral corrugation pipe with an inclined angle. Thus, a corrugated pipe for an increased strength safety is to recommend a reduced pitch and curvature radius of an inclined corrugation.

• Journal of Energy Engineering
• /
• v.9 no.4
• /
• pp.328-333
• /
• 2000

이 연구의 목적은 액정법을 이용하여 주름형상 판형 열 교환기에서의 내부유동과 열 전달 성능의 특성을 파악하는데 있으며 공기를 작동유체로 사용하였다. 과거에는 실험이 주로 판형 열 교환기의 입·출구에서의 열 전달 성능에만 관심이 집중되었다. 그러나 이 실험에서는 액정법을 이용하여 판형열교환기 셀 표면 위에서의 국소 누셀트수의 분포를 연구하였다. 레이놀즈수가 증가할수록 열 전달 성능은 증가하였으나 마찰계수는 감소하였다. 주름각이 증가할수록 열 전달 성능과 마찰계수는 모두 증가하였다. 국소 누셀트수 분포로부터 열 전달이 잘 일어나는 부분은 주름을 타고 넘어 들어온 두 유동이 만나는 곳이며 또한, 셀의 가운데 부분은 셀의 수직단면적이 커서 셀 표면과 유동의 접촉이 약하므로 작은 누셀트수를 가지는 것을 알 수 있다.

• Journal of the Korean Institute of Gas
• /
• v.9 no.3 s.28
• /
• pp.27-31
• /
• 2005

The membrane to be applied inside of the LNG storage tank is provided with corrugations to absorb thermal contraction and expansion caused by LNG temperature and pressure changes. It is very important to measure their thermal strains under LNG temperature by analytical and experimental stress analysis of the membrane. We have developed a stress measurement system using strain gages and measured the strain during cooldown and storing the LNG. We also analyzed the measured data by comparison with the FEM data.