• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.76-81
• /
• 1994

승용차에 있어 엔진의 공회전시나 주행중에 발생하는 여러 형태의 진동 및 소음의 저감은 승차감 및 차량의 안정성에 있어 중요한 과제가 되고 있다. 이러한 소음, 진동은 주로 엔진에서 발생하는 토크의 비주기적인 변동성분이 클러치(clutch), 변속기(transmission), 구동축을 거쳐 바퀴로 전달되는 과정에서 발생한다. 셔플(shuffle)은 주행중 가속페달(accelerator)을 급조작(tip-in, tip-out)하였을 때 차량이 전후로 과도적으로 울렁거리는 종진동 현상을 말하며, 이것은 가속페달의 급조작으로 인해 엔진토크가 큰 변동을 일으키고, 동력전달계를 통해 타이어에 전달된 이 토오크는 타이어축에서 구동측으로 역토오크를 발생시키기 때문에 발생한다. 여기서 팁-인(tip-in)이란 승용차를 저속으로 운전하다가 갑자기 가속페달을 밟는 경우를 말하며, 팁-아웃(tip-out)은 반대로 고속상태에서 갑자기 가속페달을 떼는 경우를 말한다. 실험과 시뮬레이션을 사용한 자동차 동력전달계의 비틀림 진동에 대한 연구는 이미 여러 연구자들에 의해 보고되었다. H.Arai은 2자유도 비선형 모델을 사용하여 클러치 접속시 발생하는 외란과 계의 안정성을 고려하여 시뮬레이션을 수행하였고, M.Kataoka는 기어의 공차(clearance)를 고려한 변속기의 강제 비틀림 진동을 실험과 시뮬레이션을 통하여 해석하였다. 그리고, Wu Hui-Le는 자동차 동력전달계의 비틀림 진동 현상을 실험과 이론적인 계산을 통해 연구하였고, R.J.Comparin는 치타음의 발생구조와 특성을 고찰하고 비서형 비틀림 공진 저감에 의한 치타음 저감 기법에 대하여 연구하였다. 또한 G.J.Fudala는 다자유도 모델을 이용하여 클러치의 비틀림 특서엥 따라 주파수분석을 수행하여 치타음 저감 방법을 연구하였고, T.Sakai는 5자유도 모델을 이용하여 엔진 공회전시 발생하는 치타음에 대해 이론과 실험을 통해 해석하고, 엔진 회전수 변동, 클러치 특성, 변속기의 드래그(drag) 토크의 영향과 치타음 저감을 위한 개선된 클러치 특성을 제시하였다. 이 외에도 Thomas C.T.와 E.P.Petkus는 특정 차량에 대한 동력전달계의 비틀림 진동 현상에 대해 연구하였다. 이러한 연구들로 볼 때, 자동차 동력전달계에서 발생하는 진동은 이론과 실험을 통해 그 해석이 가능하며 설계에 매우 유용하게 이용되고 있음을 알 수 있다. 따라서, 본 연구는 4 실린더 4 싸이클 1.5 L 엔진을 장착한 경승용차의 실차 주행실험을 통해 가속 페달의 급조작에 따른 차체의 종진동 현상을 측정하고, 엔진-변속기-타이어-차체의 반환정계 4자유도 진동모델로 시뮬레이션을 수행하여 실차 주행실험의 결과치와 비교, 분석한 후 클러치 비틀림 특성을 비롯한 자동차 동력전달계의 각 설계인자들이 차체의 종진동에 어떠한 영향을 미치는가를 해석하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.19-24
• /
• 2007

With recent advancement of high-speed, multi-gigabit data transmission capabilities, serial links have been more widely adopted in industry than parallel links. Since the parallel link design forces its transmitter to transmit both the data and the clock to the receiver at the same time, it leads to hardware's intricacy during high-speed data transmission, large power consumption, and high cost. Meanwhile, the serial links allows the transmitter to transmit data only with no synchronized clock information. For the purpose, clock and data recovery circuit becomes a very crucial key block. In this paper, a 5.4Gbps half-rate bang-bang CDR is designed for the applications of high-speed graphic DRAM interface. The CDR consists of a half-rate bang-bang phase detector, a current-mirror charge-pump, a 2nd-order loop filter, and a 4-stage differential ring-type VCO. The PD automatically retimes and demultiplexes the data, generating two 2.7Gb/s sequences. The proposed circuit is realized in 66㎚ CMOS process. With input pseudo-random bit sequences (PRBS) of $2^{13}-1$, the post-layout simulations show 10psRMS clock jitter and $40ps_{p-p}$ retimed data jitter characteristics, and also the power dissipation of 80mW from a single 1.8V supply.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.4
• /
• pp.206-211
• /
• 2011

Low water temperature during the summer associated with the occurrence of cold water zone off Haeundae was studied using the data from CTD observations and a monitoring buoy deployed in Suyeong Bay. Shortterm variability of current was dominant and was not related to the wind. The NE-SW components of wind parallel to the coast contained more than 96% of total variance and could account for major fluctuations of water temperature. Upwelling-response of water temperature was very sensitive so that the temperature began to decrease immediately after the onset of the southwesterly wind. In particular, there were three cases in which SW winds for only two days caused considerable temperature drops. In 2009, four upwelling events shorter than 5 days took place while seven events with periods of 2~18 days were recorded in 2010. During a very intense upwelling for seven days in mid-August 2010, temperature decreased by more than $10^{\circ}C$ in spite of the variable winds. Temperature variability at Gampo, Ulsan, Gijang and Haeundae had similar patterns. CTD observation and satellite imagery showed that the upwelling zone could be extended to the Haeundae-Busan area. According to the wavelet analysis, coherent periods were 2~8 days during the frequent upwelling/downwelling events.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.667-673
• /
• 2010

The near fault ground motion (NFGM) is characterized by a single long period velocity pulse with large magnitude. NFGMs have been observed in recent strong earthquakes, Northridge (1994), Japan Kobe (1995), Turkey Izmit (1999), China Sichuan (2008), Haiti (2010) etc. These strong earthquakes have caused considerable damage to infrastructures because the epicenter was close to the urban area, called as NFGM. Extensive research for the far field ground motion (FFGM) have been carried out in strong seismic region, but limited research have been done for NFGM in low or moderate seismic regions because of very few records. The purpose of this research is to investigate and analyze the seismic response of reinforced concrete bridge piers subjected to near-fault ground motions. The seismic performance of six RC bridge piers depending on three confinement steel ratios and three superstructure mass was investigated on the shaking table. From these experimental results, it was confirmed that the reduction of seismic performance was observed for test specimens with lower confinement steel ratio or more deck weight. The displacement ductility of RC bridge piers in terms of the stiffness degradation is proposed based on test results the shaking table.

• Journal of Periodontal and Implant Science
• /
• v.35 no.1
• /
• pp.87-98
• /
• 2005

The purpose of present study was to investigate the effects of physiologically active compound (SD62-122) from Phlomidis Radix on the cell cycle progression and its molecular mechanism in human gingival fibroblasts(HGFs). For this purpose, fibroblasts were isolated and cultured from excisioned gingiva during crown lengthening procedure in healthy adult. The following parameter were evaluated that there are cell number counting, MIT assay, cell cycle progression, western blot analysis. The cell number and MIT assay of primary cultured fibroblast was not increased at 2 days but significant increased compare to negative control at 3days(p<0.05). S phase was increased and G1 phase decreased in both $10^{-8}M$ and $10^{-9}M$ of SD62-122 in cell cycle analysis. The cell cycle regulation protein levels of Cyclin $D_1$, Cyclin E, cdk 2, cdk 4 and cdk 6 were increased compare to control in both $10^{-8}M$ and $10^{-9}M$ of SD62-122. The protein levels of p21 and p53 were decreased compare to control, but the level of pRb was not changed compare to control in $10^{-9}M$ of SD2-122. These results suggested that physiologically active compound (SD62-122) isolated from Phlomidis Radix increases the cell proliferation and cell cycle progression in HGFs, which is linked to increased cell cycle regulation protein levels of Cyclin $D_1$, Cyclin E, cdk 2, cdk 4 and cdk 6, and decreased the levels of p21, p53.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.363-368
• /
• 2001

It is well known that numerous factors influence the light output of curing units, but many dentists are un aware that the output of their curing lights are inadequate. This study was conducted to evaluate the light in tensity of visible-light curing units in some private dental clinics and hospital dental clinics. In order to determine the maximum light intensity of the curing units, lamps, filters and fiber optic bundles, they were replaced with new ones and light intensity was remeasured. Light intensity was measured by employing a digital radiometer (EFOS model #8000, USA). Light intensity ranged in $29\sim866mW/cm^2$ (below $150mW/cm^2$ ; 17.8%, $150\sim300mW/cm^2$ : 46.6%, above $300mW/cm^2$ ; 35.6%). The replacement of the components increased the light intensity, with maximum increases of 94.8% for lamps, 82.3% for filters, 200.8% for fiber optics and 361.5% for all three parts. According to the manufacturer of radiometer, curing light is considered as unsuitable for use with a reading of above $300mW/cm^2$ by the radiometer. Applying these criteria to the present study, 64.4% of the curing units required repair or replacement. The results of this study indicated that the light intensities of the curing units used in dental practice were lower than optimum level.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.823-830
• /
• 1999

The suppressing effects of crude extracts of three Korean teas, persimmon leaf tea extract (PLTE), green tea extract (GTE) and oolong tea extract (OTE), were studied on the induction of sister chromatid exchange (SCE) in cultured Chinese hamster ovary cells. When cells were treated with tea extract after mitomycin C (MMC) treatment, the frequency of MMC-induced SCEs were decreased at the high concentration $(1000\;{\mu}g/mL)$ of PLTE in the presence of S9 mix and at low concentrations $(20{\sim}80\;{\mu}g/mL)$ of PLTE in the absence of S9 mix, Whereas GTE and OTE showed suppressing effects on the MMC-induced SCEs at low concentrations $(10{\sim}20\;{\mu}g/mL)$ for OTE and $160\;{\mu}g/mL$ for GTE only in the presence of S9 mix. MMC-induced SCEs were decreased by post-treatment with each tea extracts with S9 mix in the G1 phase of the cell cycle. These results suggest that PLTE, GTE and OTE could have bio antimutagenic activities, and also suggest that PLTE might have unknown antimutagenic components which would be responsible for the inhibitory effect against direct acting mutagenicity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1164-1168
• /
• 2007

질소 및 인 동시제거 공정 중 대표적인 연속회분식반응조(Sequencing Batch reactor: SBR)는 비교적 간편한 운전방법과 저렴한 건설비, 유입수의 부하변동에 큰 영향을 받지 않는 소규모 하수처리에 적합한 공정으로 알려져 있다. 또한 SBR 공정은 기존 활성슬러지 공법에 비해 적은 부지로 많은 양의 폐수를 처리할 수 있고 유입수 수질 및 유량변동에 따라 다양한 운전주기를 변화할 수 있으며, 유기물 제거뿐만 아니라 반응조의 변형에 의해 영양염류의 제거가 가능한 장점이 있다. 본 연구에서는 bench scale SBR 실험을 통하여 질산염의 탈질속도 및 용해성 인의 흡수와 방출속도를 측정하고, SBR 공정의 무산소조건에서 인흡수 및 탈질을 동시에 수행하는 DPB 존재의 가능성을 파악하고자 하였다. 연구결과 무산소조건에서 S-P의 방출과 흡수가 동시에 진행되었으며, 무산소조건에서 S-P의 방출속도는 $0.08{\sim}0.94\;kgS-P/kgMLSS{\cdot}d$, 흡수속도는 $0.012{\sim}0.1\;kgS-P/kgMLSS{\cdot}d$를 나타내었다. 무산소조에서 S-P의 방출 및 흡수가 진행되는 동안 탈질과정도 함께 진행되었으며, 각각의 F/M비에서 탈질속도를 측정한 결과 F/M비 $0.44\;kgCOD/kgMLSS{\cdot}d$에서는 최대 $0.16\;kgNO_3^-N/kgMLSS{\cdot}d$의 탈질속도를 나타내었다. S-P이 방출되지 않는 경우와 방출되는 경우의 비탈질속도를 비교한 결과 S-P이 방출되지 않는 경우의 비탈질속도가 S-P이 방출되는 경우의 비탈질속도보다 높았다. 이렇게 S-P이 방출되는 경우의 비탈질속도가 더 낮은 이유는 무산소 조건에서 탈질과 S-P의 방출 및 흡수가 동시에 일어나는 경우 S-P의 방출에 관여하는 미생물과 탈질에 관여하는 미생물간의 경쟁반응 때문으로 판단된다.응답법의 적용이 가능함을 보였고, 이는 보다 복잡한 관망에서의 천이류 해석이 가능함을 시사한다.$경상도지리지$\lrcorner$(慶尙道地理志)에는 상주가 8곳으로 1/3의 자기 생산을 담당하고 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다. 이러한 현상은 첫째, 15세기 중엽 경제적 태평과 함께 백자의 수요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동기(銅器)의 대체품으로 자기를 만들어 충당해야할 강제성 당위성 상실로 인한 자기수요 감소를 초래하였을 것으로 사료된다. 셋째, 경기도 광주에서 백자관요가 운영되었으므로 지방인 상주지역에도 더 이상 백자를 조달받을 필요가 없이, 일반 지방관아와 서민들의 일상용기 생산으로 전락하여 소규모화 되었을 것이라고 사료된다.장 운동기능을 향상시키는 유효성분의 보강 등이 필요하다는 점도 알 수 있었다.더불어 산화물질 해독에 관여하는 다른 유전자

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.5
• /
• pp.239-246
• /
• 2017

In case of observing only wave height and period in the field, various wave characteristics are mainly calculated by wave by wave analysis method. In this paper, an wave by wave analysis program using MATLAB language is developed. It is possible to perform a function such as 1) correction for mean water level, 2) calculation for zero crossing time, 3) calculation for individual wave height, 4) time interval by using zero upcrossing and downcrossing method. The applicability of the developed program to the data of 0.2 second interval observed by using the WaveGuide Radar installed on HeMOSU-1 was examined. Tidal level variation removal and zero crossing time estimation were determined by linear or quadratic interpolation. It was judged that the Goda method was appropriate for calculating individual wave height, and the method proposed in this study seems to be improved through subsequent research. Due to the fineness of the sample, it can be seen that characteristics of representative waves are different from the results calculated by zero upcrossing and downcrossing method.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.939-944
• /
• 1997

The films of zeolite X on the surface of metal sieve were prepared by continuous crystallization method. It is known that the growth of zeolite crystal on the surface of metal is mainly dependent on the surface composition of metal sieve. In the present work, the zeolite nuclei could be easily formed as Cr content on the metal surface was removed by acid treatment. In order to investigate the proedure growing of zeolite crystal by the continuous crystallization method, the composition of zeolite X($6.36Na_2O-Al_2O_3-5.3SiO_2-190.8H_2O$)was supplied every 12hour. Then the mechanism and inter-relationship between the metal surface and nucleation are investigated. The results show that as the content of silica increases in the gel mixture, the nuclei of zeoilite are easily formed on the metal surface. Also, it was confirmed that the particle of zeolite stuck on the metal surface continues the linear growth. The particles are combined by the reaction of polycondensation, and finally become the shape of crystal. The sample synthesized by the film type was confirmed as zeolite X by the analyses of SEM and XRD.