• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.48-51
• /
• 1995

본 고에서는 실제 선박의 진동 양상을 근간으로 하여 최근의 초대형 유조선 및 콘테이너 운반 선의 선박진동에 대해서 개략적으로 고찰하여 보았다. 최근의 선박 진동 양상은 선박의 대형화와 고출력 및 고효율기관이 선박에 적용됨에 따라 프로펠러보다는 주기관에 의한 진동이 많이 발생 되므로 주기관으로 발생되는 종 기진력 및 선체에의 전달 메카니즘에 대해서 중점적으로 연구할 필요가 있다. 선박 진동은 현재의 추진기관 시스템이 선박에 적용되는 한 피할 수 없는 문제 이고 또한 최근에 거주성 및 작업성 향상을 위한 저진동 선박에 대한 요구도 점차 높아지고 있 으므로 진동 관계자들은 지속적인 관심을 갖는 것이 요구된다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.11
• /
• pp.897-903
• /
• 2002

The periodic high vibration has been occurred one or two times a day for a 500 MW large steam turbine during 5 months. This abnormal vibration was caused by the rubbing between the rotor and the carbide accumulated on the seal tooth of oil deflector. It was found that the accumulated carbide was insulation material installed on the HIP casing from the examination of the chemical composition. Also, this paper presents the mechanism of the periodic high vibration and the proper method to eliminate this vibration problem. This result would be good practice to find the solution of similar high vibration in the steam turbines for power plant as well as industrial rotating machineries.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.16-20
• /
• 1994

본 고에서는 진동관점에서 특히 문제시되고 있는 장행정.소수실린더.저속 2행정 디젤주기관의 기진력 발생기구와 기관본체진동에 대하여 살펴보고, 박용디젤 추진축계의 진동문제와 관련해 서는 1980년 이후부터 본격적으로 시작된 국내의 연구사례들을 중심으로 이 분야에 대한 연구 현황을 소개하고 향후 중심적으로 연구해야 할 문제점들을 검토하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1021-1027
• /
• 2018

Experimental studies have been conducted to verify that the positive coupling between pressure oscillation (p') and combustion oscillation (q') of high frequency range is a prerequisite for the initiation of low frequency instability in hybrid rocket combustion. The post-chamber length and combustion equivalence ratio were selected as critical parameters to control the phase difference between p' and q', and p' amplitude in relation to the suppression of LFI. In the results, even if the post-chamber length increases, the phase difference between p' and q' maintains below pi/2, which is a necessary condition for the LFI development, but the amplification of RI (Rayleigh index) was substantially decreased leading to a stable combustion. In addition, results confirmed that combustion stability is achieved by changing the momentary equivalence ratio and/or by suppressing the positive coupling status of p' and q'. Thus, the periodic amplification of RI was identified as the middle path of the mechanism of occurrence of LFI.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.10
• /
• pp.720-727
• /
• 2019

Resonating thermal lags of solid fuel with heat transfer oscillations generated by boundary layer oscillation is the primary mechanism of the occurrence of the LFI (Low Frequency Combustion Instability) in hybrid rocket combustion. This study was experimentally attempted to confirm that how the boundary layer was perturbed and led to the LFI. Special attention was also made on oxidizer swirl injection to investigate the contribution to combustion stabilization. Also the overall behavior of fluctuating boundary layer flow and the occurrence of the LFI was monitored as swirl intensity increased. Fluctuating boundary layer was successfully monitored by the captured image and POD (Proper Orthogonal Decomposition) analysis. In the results, oscillating boundary layer became stabilized as the swirl intensity increases. And the coupling strength between high frequency p', q' diminished and periodical amplification of RI (Rayleigh Index) with similar frequency band of thermal lag was also decreased. Thus, results confirmed that oscillating axial boundary layer triggered by periodic coupling of high frequency p', q' is the primary mechanism to excite thermal resonance with thermal lag characteristics of solid fuel.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.139-156
• /
• 1995

A set of field investigations was performed to estimate accurately the predominant periods of seismic 8round motions and the attenuation characteristics of the seismic ground vibration. Predominant periods of ground motions were estimated from the measurement of the continuous microseismic vibratins of certain periods, inherent in the ground and in the buildings, utilizing the high sensitivity digital velocity seismometer consisting of 3-component geophones and a digital seismograph. Estimated predominant periods of microseismic vibraion of the ground(measured on'the ground surface) and the building (measured on the second floor) were in the range of 0.18~0.235 sec. and 0.26~0.31 sec. respectively. The subsurface structure of the site ground was surveyed by the seismic refraction method utilizing the digital seismicwave probing system. The ground structure was found to be a two-layered system : an upper top soil layer of 7m in thickness with the P-wave velocity of 662m1sec and a lower layer of silty-clayey soils with the P -wave velocity of 2210m1 sec. The attenuation characteristics of the seismic ground vibrations were determined by the amplitude decay measurement method us;ng the Seisgun, which produces strong artificial seismic energy. Measured spatial attenuation coefficients of the ground vibration in vertical(Z) longitudinal(X), transverse(Y) direction were 0.1137, 0.0025, and 0.0290 respectively. Estimated Spartial QP's (inverse of the specific dissipation constant w.r.t. shear waved of X, Y, and Z directions were in the range of 5.913~7.575, 32.371~41.452, 2.794~3.579 re spectively. This indicates that aseimic design of the structures on the site should take stronger consideration regarding the earthquake resistance characteristics of the structures against longitudinal ground motion.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.56-56
• /
• 2003

계류라인은 해양관측부이 혹은 해양구조물을 일정일치에 계류시키기 위해서 중요한 역할을 수행한다. 본 연구에서는 상부구조물의 거동에 의한 계류라인의 거동특성을 파악하기 위하여, 상부 윗단에서 일정주기와 진폭으르 가진되는 경우에 장력과 변위의 응답을 살펴보았다. 수평으로 가진되는 경우에 규칙적으로 가진됨에도 불구하고 맨윗단에서 장력은 가진 주파수 성분 이외에 고주파수 성분이 함께 응답하였다. 이 때 고주파수 성분은 계류라인의 길이와 장력에 따라서 다른 성분으로 나타났는데, 이 성분은 상부단에서 발생한 에너지가 전달되어 해저고정단에서 다시 반사되어 발생하는 것으로 판단되어 진다. 향후 이 성분에 대한 정량적인 연구가 필요하다. 수직으로 가진되는 경우에는 장력이 충격력 효과로 나타났는데, 이것은 지반과의 상호작용에 의한 것으로 판단된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.1
• /
• pp.93-101
• /
• 2000

In a gas-turbine engine, fan blades in flow path are confronted with many kinds of loading. The study of the excited force by the wake of struts has proposed and the possibility of fatigue failure about rotating fan blades by the excited force at the steady state is evaluated. Equations of the excited force of wakes has been derived at the steady state and the maximum pressure distributions measured at the transient state are proposed. Dynamic characteristics and the fatigue strength of fan blades by experimental test were obtained. To evaluate HCF(High Cycle Fatigue) damage of fan blades, FEM analysis was performed with a steady state harmonic response, which was followed by high cycle fatigue damage factor from goodman diagram.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.274-275
• /
• 2000

광결정(photonic crystal)으로 광원의 자발 방출을 조절하면 문턱전류 없는 레이저, 고효율 다이오드, 파장 크기에서 손실 없이 급격히 꺾을 수 있는 광도파로 등 기존의 광소자에서 얻을 수 없는 좋은 성능을 얻을 수 있을 것으로 예상된다. 이러한 광결정은 유전체를 파장정도 크기에서 주기적으로 배치시킨 인공적인 결정인데 고체에서 원자의 주기적인 배치로 전자가 전파할 수 없는 진동수 영역, 즉 밴드갭이 생기는 것과 유사하게 빛에 대해서 빛이 전파할 수 없는 진동수 영역인 광밴드갭(photonic bandgap)을 가진다. 그런데 관심있는 광영역에서 3차원 모든 방향으로 광밴드갭이 있는 구조물은 마이크로미터보다 작은 내부 구조를 가지는 복잡한 3차원 구조물로 제작이 어렵다. 이러한 어려움을 극복하기 위해 제작이 비교적 용이한 3차원 광밴드갭 구조물이 찾아지고 있다. 다른 접근 방법으로 평면(x-y)에서는 2차원 광밴드갭을 이용하고 제 3의 방향(z축)으로는 전반사를 이용하는 구조는 제작이 용이할 뿐만 아니라 처음부터 광원의 편광을 TE 또는 TM 모드로만 방출 되도록 준비해 줄 수 있으면 거의 3차원 광결정에서 얻을 수 있는 효과를 낼 수 있는 것으로 발표되었다.$^{(1)}$ 이 방법을 이용하여 최근에 미국의 캘리포니아 공과대학(Caltech)을 중심으로 레이저 동작을 보여 주었다.$^{(2.3)}$ 공기로 둘러싸인 얇은 유전체 평판에서 생기는 전반사와 평판 위에 2차원 삼각형살창(triangular lattice)에 구멍을 뚫어 얻는 2차원 광밴드갭을 이용해 3차원 공진모드를 형성하였다. 이러한 구조에서 1개만 구멍을 매워서 만든 공진기는 저온(143 K)에서 레이저 발진을 보였고 여러 개의 구멍을 매운 경우는 상온에서 펌프 펄스의 유지시간이 0.5% 인 경우 레이저가 동작하는 것을 보여주었다. 이는 구조내에서 열전도가 문제가 된다는 것을 의미하는데 위아래가 공기로 둘러 싸여 있어 발생한 열이 가는 유전체 네트웍을 통해서만 전달 될 수 있기 때문이다. (중략)

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.13-29
• /
• 2001

A mathematical model was proposed to analyze the vibration of diaphragm, such as the contact lenses fitted on the eyes, being subjected to the external sinusoidal pressure. The model incorporates the differential equations and their numerical solution program, based on the wave equations. Turbo-C and graphic software, formulated to describe the dependence of the various parameters involved in the vibration. The model predicts the radial distribution of amplitude, frequency dependence of both average displacement amplitude and the power of diaphragm whose edge is being either simply supported or rigidly clamped in vibration. The effect of variables such as thickness, radius, damping coefficients on the vibration characteristics was illustrated by the computer simulation of the derived program. As the frequency of driving pressure increases above the certain value determined by the boundary conditions and parameters the wave shape or pattern changes from simple arc to belly or loops having double antinode. It seems that the effect of outer antinode progressively increases as the frequency increases. If this kind of phenomena occurs to the contact lens on the cornea in vivo, it may cause an abnormal correction power in the lenses or pull off the eye due the increased rise of outer part of the lens.