• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.647-655
• /
• 1998

심미도재수복시의 와동의 폭과 교두의 capping이 응력의 분포에 미치는 영향을 비교하기 위하여 연속사진 촬영술을 이용하여 상악제1소구치의 3차원 유한요소 모델을 제작하였다. 법랑질, 상아질, 도재 및 복합레진시멘트의 각각의 재질에 대한 물성치를 부여하고, 140N의 하중을 가하여 Super SAP 프로그램으로 해석하여 다음과 같은 결과를 얻었다. 1. 응력은 탄성계수값이 큰 법랑질과 도재를 따라 분포되고, 연질의 상아질에는 적게 발생된다. 2. 와동의 협측치수선각부위에서는 인레이모델의 경우에는 와동폭의 증가에 따른 응력의 증가는 관찰되지 않으나, 온레이모델에서는 응력의 증가가 관찰된다. 3. 온레이모델의 경우에는 근심협측교두를 피개하고 있는 도재부위에 최대주응력이 크게 나타나고, 치은변연부의 도재에서는 교두를 피개하지 않은 인레이모델의 해당되는 법랑질에 비해 응력이 1/2정도로 감소된다. 4. 하중이 증가되면 잔존치질의 파절은 근심와동의 협측치은선각부위에서 협측보다는 치은을 향해 경사지게 일어날 것이다. 5. 교두를 피개하면 교두피개부위에서의 도재의 파절가능성은 증가되고, 치은변연에서는 도재와 하부의 치질의 파절가능성은 감소된다. 6. 도재를 이용하여 교두를 피개할 경우에는 응력을 견딜 수 있는 도재의 두께를 부여할 수 있도록 교두를 충분히 삭제하여야 하고, 충분한 강도를 갖는 도재를 선택하여야 한다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.265-270
• /
• 2022

The purpose of this study is to derive the damage weak part of the elastic rail fastening system for concrete tracks (System 300-1). In the concrete tracks, the elastic rail fastening system sticks the rail and the sleeper and reacts all the time when the train is running. Among the components of the rail fastening system, the resilience pad and tension clamp were fatigue members and were constantly deformed in response to compressive and uplift forces. In this study, the residual deformation characteristics of the tension clamp according to the period of use were analyzed using by specimens taken on site in the same section for 6, 11, and 16 years on the serviced urban transit. In addition, the damage mechanisms for each component were derived based on finite element analysis. As a result of the numerical analysis, the stress (strain) of each part of the tension clamp according to the external force from the applied clamping force was analyzed to derive the damaged weak part of the tension clamp.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.359-370
• /
• 2006

The objective of this study was to investigate the effect of excessive occlusal loading on stress distribution on four type of cervical lesion, using a three dimensional finite element analysis (3D FEA). The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. Four different lesion configurations representative of the various types observed clinically for teeth were studied. A static point load of 500N was applied to the buccal and lingual cusp (Load A and B). The principal stresses in lesion apex, and vertical sectioned margin of cervical wall were analyzed. The results were as follows 1. The patterns of stress distribution were similar but the magnitude was different in four types of lesion 2. The peak stress was observed at mesial corner and also stresses concentrated at lesion apex. 3. The compressive stress under load A and the tensile stress under load B were dominant stress. 4. Under the load, lesion can be increased and harmful to tooth structure unless restored.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.1-12
• /
• 2007

For the purpose of effective utilization of domestic second-grown larch as structural members, post and beam construction applying traditional construction to Japanese larch glulam members was adopted with processing by machine pre-cut method. In general, horizontal shear test by KS F 2154 is conducted to assess the horizontal shear properties of the wooden structure by post and beam construction. The frame was consisted of post and beam member with appropriate fasteners, and members have their own processed parts (notch, hole, etc.) that can be well-connected each other. The shear wall was consisted of the frame with screw-nail sheathed panel (OSB). The results of horizontal shear loading tests without vertical loads conducted on the frame and the shear wall structures, the maximum strengths were about 1.9 kN/m and about 9.7 kN/m, the shear rigidities were about 167 kN/rad, 8198 kN/rad, respectively. The strength proportion of the frame specimen was about 20% of the wall's and about 2% in initial stiffness. Nail failures are remarkable on the shear wall specimen with punching shears and shear failures. The shear load factor for the shear wall specimen by the method of Architectural Institute of Japan was 1.5, which was obtained by the bi-linear method. Loading method should be considered to obtain smooth load-deformation relationship. For the better shear performance of the structures, column base and post and beam connections and sheathed panel should be further examined as well.

• Journal of Ginseng Research
• /
• v.23 no.1 s.53
• /
• pp.44-49
• /
• 1999

Cu/Zn superoxide dismutase (SOD1) is a protective enzyme responsible for the dismutat ion of superoxide radicals within the cell by converting superoxide radicals to oxygen and hydrogen peroxide, which is in turn changed to oxygen and water by catalase. Previously, we reported that the panaxadiol (PD) and its ginsenoside $Rb_2$ induced the expression of SOD1 gene through AP2 binding site and its induction. Here, we examined the effect of subfractions of panaxadiol ginsenosides, which were extracted from different parts of ginseng root that possess various ratios of panaxadiol to panaxatriol, on the induction of SOD1 gene expression. To explore this possibility, the upstream regulatory region of SOD1 was linked to the chloramphenicol acetyl transferase (CAT) structural gene and introduced into human hepatoma HepG2 cells. We observed that the transcriptional activation of SOD1 was proportional to the contents ratio of panaxadiol ginsensides. Consistent with this results, the total extract portion prepared from the finely-hairy root, which contains the higher ratio of panaxadiol to panaxatriol about 2.6, increased the SODl transcription about 3 fold. This results suggest that the panaxadiol fraction could induce the SOD1 and total extract of the ginseng finely-hairy root would be a useful material as a functional food for the SOD1 inducer.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.210-217
• /
• 2016

Purpose: The aim of this study was to evaluate the marginal and internal adaptation of monolithic zirconia restoration made without physical model by digital intraoral scanner. Materials and methods: A prospective clinical trial was performed on 11 restorations as a pilot study. The monolithic zirconia restorations were fabricated after digital intraoral impression taking by intraoral scanner (TRIOS, 3shape, Copenhagen, Denmark), computer-aided designing, and milling manufacturing process. Completed zirconia crowns were tried in the patients' mouth and a replica technique was used to acquire the crown-abutment replica. The absolute marginal discrepancy, marginal gap, and internal gap of axial, line angle, and occlusal part were measured after sectioning the replica in the mesiodistal and buccolingual direction. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney U test (${\alpha}=.05$). Results: From the adaptation analysis by replica, the statistically significant difference was not found between mesiodistal and buccolingual sections (P>.05), but there was significant difference among the measurement location (P<.01). The amount of absolute marginal discrepancy was larger than those of marginal gap and internal gap (P<.01). Conclusion: Within the limitations of this study, the adaptation accuracy of model-free monolithic zirconia restoration fabricated by intraoral scanner exhibited clinically acceptable result. However, the margin of zirconia crown showed tendency of overcontour and cautious clinical application and follow up is necessary.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.1
• /
• pp.50-62
• /
• 1989

This is clinicostatistical study of mandibular fractures. This study was based on a series of 677 patients with mandibular fracture during the period of 1982 to 1987. This results obtained were as follows : 1. In respect of incidence, there were high frequency in May and September, and in large city(63%). 2. The age frequency was the highest in the 20s-year old group (38.7%), and the ratio of male to female was 4.64 : 1. 3. The most common etiologic factor was blow(31.5%), but in children that was traffic accident followed by fall down. 4. The most common site of bone fractures was symphysis, followed by angle, condyle. In comparison of right and left sides, left side was more frequently involved(364 cases) than right side(257 cases). 5. The patients arrived in hospital immediately within 24 hours after accident were 62.9% of all, and 42.4% was arrived via private medical and dental clinic. 6. In respect of treatment, open reduction was 55.5% of all, closed reduction was 37.2%. In children, closed reduction was done in 50.6%.

• Journal of the Korea Computer Graphics Society
• /
• v.11 no.2
• /
• pp.40-46
• /
• 2005

본 논문에서는 스윕곡면(sweep surface)을 기반으로 복잡한 3차원 물체의 형상을 변형하는 새로운 자유형상 변형(free-form deformation)기법을 제시한다. 본 논문에서 제시한 방법은 기존의 격자점(control lattices)을 조정하는 체적기반의 방법에 비해 스윕기반의 절차적 (procedural) 모델링 기법의 직관성을 활용하여 사용자에게 보다 효율적인 형상변형 기법을 제공한다. 3차원 물체의 정점들은 스윕곡면의 단면(cross-section)에 바인딩(binding) 되어 곡면의 변화에 따라 형상변형을 한다. 본 논문에서 제시한 스윕기반 형상변형 기법은 3차원 물체를 부분적으로 변형하는 기법과 계층구조를 기반으로 전반적인 형상을 변형하는 기법으로 구분된다. 부분적인 형상변형 기법은 스윕곡면을 구성하는 성분의 다단계(multi-level) 표현을 통하여 사용자에게 다중해상도(multi-resolution) 형상변형 기능을 제공한다. 계층구조에 기반한 형상변형 기법은 복잡한 3차원 물체를 위상구조에 따라 여러 계층으로 분할하고, 각 부분의 형상을 근사하는 스윕곡면들을 생성한다. 분할된 각 부분의 정점(vertices)들은 해당 스윕곡면에 바인딩 되어 스윕곡면의 단면의 변화를 따르게 된다. 이러한 상황하에서 스윕곡면들은 3차원 물체의 계층구조에 따라서 서로 상호작용(interaction)을 하게 되고, 결과적으로 3차원 물체의 각부분은 상호반응적 형상변형을 한다. 이러한 계층구조에 기반한 상호반응적 형상변형 기법은 사용자의 의도에 부합하는 보다 사실적이고 기능적인 형상변형을 가능하게 한다. 본 논문에서는 다양한 3차원 물체에 대한 실험을 통해 제시된 방법의 효율성을 입증한다. 결과 막성 사구체병증과 같은 신질환이 발견될 수 있으므로 신조직검사의 적응증에 합당한 경우 적극적인 신조직검사를 시행하여 원인 질환을 찾는 노력이 필요할 것으로 사료된다.. 남아가 75명으로 남녀비는 3.6:1을 보였다. 임상병리학적 분류상 일차성 신증후군이 89명(92.7%), 이차성 신증후군이 7명(7.3%)이었으며 일차성 신증후군에서 minimal change nephrotic syndrome이 71명으로 79.8%, focal segmental glomerulosclerosis 11.2%, mesangial proliferation 4.5%, membranoprolifrative glomeulonephritis 3.4%, membranous nephropathy 1명 1.1%이었으며 2차성 신증후군은 $Henoch-Sch\"{o}nlein$ nephritis가 3례로 가장 많았다. 미세변화 신증후군 71명 중 비재발군이 16명으로 22.5%, 비빈발 재발군 49.3%, 빈발 재발군 18.3%, 스테로이드 의존군 9.9%를 보였다. 결론 : 대전시에서의 신증후군 환아의 발생빈도는 15세이하 소아 10만명당 약 5명으로 추정되었으며 10여 년전과 비교하여 큰 변화를 보이지는 않았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는

• Journal of Yeungnam Medical Science
• /
• v.8 no.2
• /
• pp.35-44
• /
• 1991

Recently many authors have reported about the relationship of the volumes of hemorrhage in the brain parenchyme, hemorrhagic sites, optimal operation time, and the effects of mannitol and steroid on control of ICP to clinical manifestations. Many attempts to measue ICP in hydrocephalus, brain tumor, and head injury have been reported. But the measurements of intracranial pressure in spontaneous intracerebral hemorrhage are rare. Intracranial pressure was monitored prospectively in 30 patients who had stereotaxic surgery for spontaneous intracerebral hemorrhage. The results are as follows. 1. Intracranial pressure was increased in high $PaCO_2$. 2. There were no correlation in ICP, rebleeding and ADL at discharge(P > 0.05). 3. ICP was the most high level in 72 hours after operation. 4. There was 63.2% decrease in ICP after litigation with 6000 IU urokinase in the site of hemorrhage. 5. There was no correlation between the numbers of natural drainage and ADL at discharge(P > 0.05). 6. The higher the initial GCS, the higher the Postoperative GCS.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.375-379
• /
• 1986

A culture experiment of the ark shell, Anadara broughtonii, one of the edible clams, was carried out in Yoja Bay located at the south ern coast of Korea to find the state of growth and any problems which influence them. Seed shells at an average length of 2.5cm and a weight of 2.5g were planted on bottom mud with a density 20 to 40 shells per square meter on March 10 and 11, 1982. Shell length, shell height, shell breadth, meat weight (wet weight), and total weight for six months from August 1982 to February 1983 were measured to find their state of growth. At the same time, the survival rate was investigated during the whole culture period through December 1983 when they were harvested. Growth, on the whole, was fast when water temperature was high. For a year, an average shell length and total weight attained to 6.1 cm and 63.0g respectively and meat weight was gained to 19.5g. It showed that the state of growth was favourable. Shell shape became round from the oval ana meat weight increase was faster than shell growth as time goes by regardless of water temperature while both shells and total weight increased faster during high temperature. A month after seed shells were planted, about $30\%$ of them was dead and a high mortality, say $5\%\;to\;8\%$ per month, was kept till September. It dropped to around $2\%$ aften divers eliminated starfish, Asterias spp., in August. Thereafter, the rate maintained through December. In all, the final survival rate was about $10\%$ at the time of harvest in December 1983. It was caused mainly by starfish predation. Therefore, a best way for satisifactory culture is seemed to find a way to get rid of the starfish.