• Korean Journal of Poultry Science
• /
• v.17 no.3
• /
• pp.141-156
• /
• 1990

The experiments were conducted to investigate the possibility of improving the effectiveness of the existing method to estimate the edible meat weight in the live broiler chicken. A total of 360 birds, five male and female chicks from each line were sacrificed at Trial 1 (body weight 900-1, 000g), Trial 2 (body weight 1.200-1, 400g), Trial 3(body weight 1, 600-1, 700), and Trial 4(body weight 2, 000g) in order to measure the body weight, edible meat weight of breast, thigh and drumsticks, and various components of body weight. Each line was reared at the Poultry Breeding Farm, Seoul National University from the second of july, 1987 to the thirteenth of September, 1987. The results obtained from this study were summarized as follows ： 1. The average body weights of each line( H. T, M, A) were $2150.5\pm$34.9, $2133.0\pm$26.2, $1960.0\pm$23.1, and $2319.3\pm$27.9, respectively. at 7 weeks of age. The feed to body weight eain ratio for each line chicks was 2.55, 2.13, 2.08, and 2.03, respectively, for 0 to 7 weeks of age. The viability of each line was 99.7. 99.7, 100.0, and 100.0%, respectively, for 0 to 7 weeks of age.01 was noticed that A Line chicks grow significantly heavier than did T, H, M line chic ks from 0 to 7 weeks of age. The regression coefficients of growth curves from each line chicks were bA＝1.015, bH＝0.265, bM＝0.950 and bT＝0.242, respectively. 2. Among the body weight components, the feather. abdominal fat, breast, and thigh and drumsticks increased in their weight percentage as the birds grew older, while neck. head, giblets and inedible viscera decreased. No difference wat apparent in shank, wings and hack. 3. The weight percentages of breast in edible part for each line thicks were 19.2, 19.0, 19.9 and 19.0% at Trial 4, respectively. The weight percentages of thigh and drumsticks in edible part for each line chicks were 23.1, 23.3, 22.8, and 23.0% at Trial 4. respective1y. 4. The values for the percentage meat yield from breast were 77.2. 78.9 73.5 and 74.8% at Trial 4 in H, T, M and A Line chicks. respectively. For thigh and drumstick, the values of 80.3, 78.4. 79.7 and 80.2% were obtained. These data indicate that the percentage meat yield increase as the birds grow older. 5. The correlation coefficients between body weight and blood. head, shanks. breast. thigh-drumstick were high. The degree if correlation between abdominal fat(%) and percentage of edible meat were extremely low at all times, but those between abdominal fat (%) and inedible viscera were significantly high.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.6 s.79
• /
• pp.717-726
• /
• 2005

This study investigates the bearing pressure distribution and design of an H-section steel column baseplate under concentric loading. In general, the size and thickness of the baseplate are determined with the assumption that the bearing pressure of the column baseplate is distributed uniformly. When the column is loaded lightly, however, the baseplate becomes smaller andthinner and the bearing pressure of the baseplate is distributed non-uniformly. In this study, the distribution of the bearing pressure is investigated using the experimental method and the analytical method. Seven specimens of the H-section steel column baseplate were fabricated and tested. The analysis of the specimens was performed using the finite element analysis program, ANSYS. It is not appropriate to use the Limit State Design,which assumes that the bearing pressure of the baseplate is distributed uniformly,because the bearing pressure is distributed non-uniformly and is concentrated under the column sectio.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.463-470
• /
• 2004

In this study, the bearing pressure distribution and design method of rectangular steel tubular column base plates under concentric loading were investigated. In general, the size and thickness of the baseplate are determined with the assumption that the bearing pressure of the column baseplate is uniformly distributed. When the column is loaded lightly, however, the size of the baseplate becomes smaller, the thickness becomes thinner and the bearing pressure of the baseplate is not distributed evenly. In this study, the distribution of the bearing pressure was investigated using the experimental and analytical methods. Four test specimens of the rectangular steel column baseplate were fabricated and tested. The analysis of the specimens was done using the finite element analysis program ANSYS. The result was that it was appropriate to use the effective width method to design the lightly loaded column baseplate, because the bearing pressure was not distributed evenly and was only concentrated under the column section.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.383-391
• /
• 1998

Launching truss used for constructing the precast segmental concrete bridge has upper chord, lower chord and diagonal members. And the pin is used for connecting these members. From the field loading test carried out for investigating the actual behavior of launching truss, the great difference is analyzed between measured stress and calculated stress. Based on measured value, the structural analysis are carried out about assumed abnormal behavior of connection part. From the results of analysis, it is analyzed that the abnormal behavior of connection part greatly affect the structural behavior of launching truss. In addition, from the investigation of safety of launching truss, it is evaluated that the launching truss has enough safety with normal behavior of connection part.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.5 s.45
• /
• pp.53-61
• /
• 2005

In order to evaluate the limit earthquake resistance of multi-story steel frames influenced by the strength and stiffness ratios of members, a series inelastic response analysis were carried out. From the analysis results, the damage distribution rules of multi-story steel frames were proposed. Conclusions are summarized as follows; 1)As the stiffness ratios of beam and column becomes small, the damage concentrates on the lower end of columns of the first story. 2) Considering the strength and stiffness ratios of the beam and column with weak beam type mechanism, the equations predicting the damage distribution of multi-story steel flames were proposed. 3) Through the equation which was supposed in this study, it is speculated that the damage distribution of the rigid or semirigid beam collapse type multi-story steel structure building can be predicted.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.3
• /
• pp.231-236
• /
• 2004

Crop productivity would be determined by relative capacity of source and sink. The study was carried out to measure the effects of shading and flower bud pinching on growth and yield of Atractylodes japonica Koidz. Shading treatment after transplanting was done at 100%, 65, 45 or 25% level of natural light intensity but the pinching treatment was to remove all the inflorescences formed after June 10, July 10, August 10 or none. Growth and yield at early and late stages were periodically measured. At the early stage, shading mainly influenced fresh weight rather than morphological characters. At the late stage, however, severer shading decreased numbers of stems, leaves, roots, fraction and total fresh weight. 65% shading from July 1 to September 30 after skipped the emerging and early growth stages showed nearly same growth and morphological characters but more rhizome yield per unit area than non-shading. In flower bud pinching treatment, earlier pinching increased number of roots, fraction fresh weights per plant and rhizome yield per unit area.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.1
• /
• pp.75-82
• /
• 1991

The present paper describes a preliminary design method by using the computer graphics for creation of the fore and after body profiles of fishing vessel. It is well known that the Form Parameter design method has some merits at an early stage of design, and the B-spline curve generation technique has some prior properties in representing hull form with the computer graphic. The B-spline curve generation technique combined with the form parameter design method is employed to generate the profiles of fishing vessel. For fore body the stem profiles with bulbous bulb or without one are considered. And for after body the stern profiles of cruiser type and the transom type are generated with stern bulb or with shoe piece. Several examples will shown.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.519-526
• /
• 2003

For preliminary structural analysis of superstructures on very large floating structures(VLFS), superstructures are analyzed considering elastic deformations of barge type lower-structures subjected to wave loads. In this case, to consider the effect of wave loads on the superstructure, initial displacements at the support points of superstructures are evaluated as input data for the analysis. However, the evaluation and application of displacement loads are tedious and very time-consuming processes. Therefore, this paper proposes a simplified static analysis method to analyze the structural behaviors of superstructures on very large floating structures subjected to wave loads. In this study, the member forces due to the variation of beam span and the amplitude and period of wave load are analyzed by using an example 4 span -3 story structure and the amplification factors for beam moments are represented by the specific regression equation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.6
• /
• pp.505-511
• /
• 2011

Purpose: This study evaluated correlation and risk factors between position of the mandibular third molars and mandibular angle fractures using clinical and radiographic findings. Methods: Medical records and panoramic radiographs of 188 patients with mandibular fractures were retrospectively reviewed. The presence and position of the third molars were assessed for each patient and were related to the occurrence of mandibular angle fractures. Results: The incidence of mandibular angle fracture was found to be greater when a lower third molar was present, particularly at the occlusal plane positioned on the $2^{nd}$ molar occlusal surface (by Archer system) and the third molar is impacted in mandibular ramus (by Pell & Gregory system). Of the 192 sites with a lower third molar, 32 (16%) had an angle fracture. Of the 184 site without lower third molars, 16 (8%) had an angle fracture. Conclusion: This study confirmed an increased risk of angle fractures in the presence of a lower third molar as well as variable risk for angle fracture, depending on positioning of the third molar.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.199-203
• /
• 2006

The marketability of soybean sprout mainly depends on shape such as hypocotyl thickness and presence of lateral root formation, etc. To clarify the effects of agitating culture box on growth and shape of soybean sprouts, different agitation frequency (0, 3, 5 times day-1) and duration (0, 1, 2, 3 days) were applied during sprout cultivation. More frequent and longer agitation resulted in less lateral root formation and shorter hypocotyl length, while total lengths were not affected by agitation due to agitation-induced root length increment. Agitation also increased the diameter of hypocotyl's hook pin, but not the middle part. Unlike morphological characteristics, the growth of sprouts as measured by fresh and dry weight of cotyledon, hypocotyl, root were not affected by agitation. In conclusion, it is very likely that agitating culture box during sprout cultivation may alter the shape of soybean sprouts without affecting growth of sprouts.