• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.639-640
• /
• 2011

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.611-616
• /
• 1996

원자력 발전소에서 대기중으로 방출된 방사성 물질의 이동 양태는 지형과 기상조건에 의해 크게 좌우되므로, 해안가에 위치해 있는 월성부지의 경우는 빈번히 발생하는 해륙풍 특성을 규명하여 이에 적합한 환경영향평가 및 비상대응체제를 구축해야 한다. 월성부지의 해륙풍 순환구조를 파악하기 위해 봄철 해륙풍 상층기상 특별관측을 월성부지를 중심으로 4개 지점에서 실시하였다. 관측결과를 분석하여 해륙풍이 방사성 물질의 대기확산에 미치는 영향을 분석하고, 해륙풍을 반영할 수 있는 새로운 환경영향평가 방법론을 고찰하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.196-197
• /
• 2003

광섬유형 센서는 전자기적 간섭에 강하고 높은 감도와 원거리 측정 등의 장점뿐만 아니라 낮은 삽입 손실, 높은 기계적인 신뢰성, 원거리 측정과 같은 장점을 가지고 있어 광통신 기술뿐 아니라 기초과학및 응용 과학분야의 계측에 활발히 이용되고 있다. 온도센서의 경우 센서의 재료가 온도에 견디는 정도에 따라 측정범위가 좌우되므로 광섬유형 센서의 경우 넓은 온도범위에서 측정이 가능하며 다양한 구조의 센서구현이 용이하다. (중략)

• The Journal of Engineering Geology
• /
• v.3 no.2
• /
• pp.203-214
• /
• 1993

Underground Injection Control regulations for Class I injection wells require that the vertical dufusion be considered as a mechanism for transport of contaninants in evaluating containment Due to the low permeability in the confining aquitard, the movement of contaminants over the long term is controlled by the molecular diffusion. The movement can be predicted, using the Fick' S second law of diffusion. The diffusion coefficient in Fick' s law has been determined experimentally in this study. Instantaneous injection of $^{51}Cr$ was used to trace the distribution of Cr(VI) in soil plugs and an analytical solution was applied to calculate the diffusion coefficients. This study shows the effect of environmental factors, such as temperature, chloride concentration, applied amount of $^{51}Cr$, and bulk density of injection formations on diffusion of Cr(VI)

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2
• /
• pp.66-76
• /
• 1999

This paper proposes that can take at high speed the information of binocular disparity with moving translational and forward stereo camera to the extent that does not occur the problem of a correspondence point. It shows that in case of stereo vision with translational motion, can take the information of binocular disparity being devoid of error and putting high confidence in, and that in case of stereo vision with forward motion, can take the horizontal component which can not be detected in common stereo vision. Besides, the stereo vision can be done at high speed due to being bright and small a correspondence point comparing not to do, because a correspondence between right and left images is previously limited. But there are problem that a resonable information of binocular disparity can not be taken, if the vicinity of center of image is in accord with the region of occlusion in stereo vision with forward motion.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.28-32
• /
• 2014

Purpose Patient motion during myocardial perfusion SPECT can produce images that show visual artifacts and perfusion defects. This artifacts and defects remain a significant source of unsatisfactory myocardial perfusion SPECT. Motion correction has been developed as a way to correct and detect the patient motion for reducing artifacts and defects, and each motion correction uses different algorithm. We corrected simulated motion patterns with several motion correction methods and compared those images. Materials and Methods Phantom study was performed. The anthropomorphic torso phantom was made with equal counts from patient's body and simulated defect was added in myocardium phantom for to observe the change in defect. Vertical motion was intentionally generated by moving phantom downward in a returning pattern and in a non-returning pattern throughout the acquisition. In addition, Lateral motion was generated by moving phantom upward in a returning pattern and in a non-returning pattern. The simulated motion patterns were detected and corrected similarly to no-motion pattern image and QPS score, after Motion Detection and Correction Method (MDC), stasis, Hopkins method were applied. Results In phantom study, Changes of perfusion defect were shown in the anterior wall by the simulated phantom motions, and inferior wall's defect was found in some situations. The changes derived from motion were corrected by motion correction methods, but Hopkins and Stasis method showed visual artifact, and this visual artifact did not affect to perfusion score. Conclusion It was confirmed that motion correction method is possible to reduce the motion artifact and artifactual perfusion defect, through the apply on the phantom tests. Motion Detection and Correction Method (MDC) performed better than other method with polar map image and perfusion score result.

• Radiation Oncology Journal
• /
• v.15 no.4
• /
• pp.387-392
• /
• 1997

Purpose : To quantify the movement of lung Parenchyma for ICRU 50 Planning Target Volume (PTV) delineation of the lung region. Materials and Method : Fluoroscopic observations and measurements are Performed on 10 patients with chest region cancer who have normal putmonary functions We have divided the lung region into 12 parts for the right lung, 10 parts for the left lung and four to five Points of lung parenchyma were selected for anatomical analysis Points, Fluoroscopic images are sent to a computer and then movements are measured. Results : Both lowe lobes showed the longest longitudinal movements because of breathing (average 14.1mm, maximum 22.1mm), while anteroposterior displacement showed the smallest value. Lateral movements of the lung parenchyma averaged 6.6mm, and the maximum value was 9.1mm, (both hilar regions showed maximum values because of cardiac motion) Conclusion : We could quantify the lung movements by measuring parenchyma displacements. The movements of both upper lobes were less than those of the middle and upper lobes in longitudinal and transverse movements. Optimal margins can be selected for PTV delineation using these results.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.05a
• /
• pp.173-181
• /
• 2000

본 논문에서는 비동기 방식 CDMA의 표준화 기관인 3GPP(3rd Generation Partnership Project) 규격에 의거 비동기 IMT-2000 역방향 링크의 Physical layer flatform simulation을 수행하여 차세대 이동통신의 성능 분석 및 파라메터를 도출하였다. 역방향 링크의 성능은 채널 환경과 데이터 전송율, 채널 코딩 기법, 변복조 방식 등에 의해 크게 좌우된다. 따라서, 광대역 채널 모델링과 ITU-R 평가 환경에 근거하여 데이터 전송율에 따른 시스템 성능과 채널 환경에 따른 시스템 성능, 터보 부호화에 따른 성능, 터보 인터리버 종류에 따른 성능 및 OCQPSK 변복조 방식에 따른 성능을 분석하여 비동기 방식 시스템의 기술적 근거 및 타당성을 제시하며 차세대 이동 통신 서비스의 전개시기에 적절한 연구로서 활용될 수 있는 자료를 제시하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.209-210
• /
• 2016

Depending on the progress of globalization is increasing the expectations for logistics services. The introduction of logistics equipment to promote the efficiency of the logistics center has emerged as a key factor influencing the competitiveness of the logistics center. Most of the logistics equipment introduced in the logistics center is expensive imported products. The development of logistics equipment is needed....

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11
• /
• pp.3544-3555
• /
• 2000

매칭방법은 기하 및 입체 모델링에서 재단 곡면과 이들에 대한 부울 연산에 사용되는 기초적인 연산이다. 그러나 매칭연산은 부드러움을 정확하게 표현하는데 고 차수의 미분계수 제약조건으로 인하여 많은 계산량이 필요할 뿐만 아니라 곡면상의 여러 점을 동시에 선택하여 이동하였을 때, 곡면표현에 사용되는 복잡한 함수식으로 인하여 일반해를 구하기 어려운 단점을 가진다. 본 논문은 분수식에 의하여 RMC(Rotation-Minimizing Curve)을 정의하고 이를 이용하여 자유 형태 곡면간에 변형 매칭 방법을 제안한다. RMC는 매칭곡선과 곡면의 접선벡터, 회전벡터, 곡률의 변화율과 같은 기하학적 기법을 기반으로 한다. 제안한 방법은 입력으로 주어지는 곡면의 기하학적 복잡도와는 무관하게 매칭을 수행할 수 있으며 수행 성능은 계산된 매칭 곡선의 복잡도에 의해서만 좌우된다. 또한 곡선 표현에 사용된 값들을 정의된 매칭 곡선식에 그대로 적용할 수 있었으므로 최적화 응용 문제에 효율적으로 적용할 수 있다.