• Journal of Biosystems Engineering
• /
• v.34 no.5
• /
• pp.305-314
• /
• 2009

The purpose of this paper was to design an effective control system of 1-axis exciter for a seat vibration test of agricultural tractors using MATLAB simulation. The developed simulation model was composed with a hydraulic pump, a hydraulic servo valve, a hydraulic cylinder and load system. Also it was verified by comparing the simulation results with experimental results of actual control system in order to optimize the control performance. And in order to improve its control performance, the designed PID controller in this research was tuned using Ziegler-Nichols 2nd law and zero's moving method of PID controller's transfer function. As the result of these research, the developed position control system was able to control the system's position accurately within 5% errors.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.1
• /
• pp.59-64
• /
• 2015

This study focuses on the dimensions of tractor seat, which is one of the important link between the tractor and the operator based on ergonomic approach in the design process. 7 anthropometric data sets were introduced from Korean and US anthropometric database for adult male and female including length of buttock to back of knee (sitting), height of lowest point of shoulder blade (sitting), underside elbow height (sitting), and so on. Design factor for the tractor seat included dimensions of seating surface, dimensions of backrest surface, and the location of armrest. The shape of spinal curve and clothing correction should be also considered during the design process. The result of this study can be used as a guideline for the design process of tractor seat.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1391-1398
• /
• 2011

Biomechanical analysis of arm motion during steering was performed using a motion analysis technique. Three-dimensional position data for each part of arm are fed into an interactive model combining a musculoskeletal arm model and the mechanical steering system to calculate joint angles and torques using inverse kinematic and dynamic analyses, respectively. The analysis shows that elbow pronation/supination, wrist flexion/extension, shoulder adduction/abduction, and shoulder flexion/extension have significant magnitudes. Sensitivity analysis of the arm joint motion with respect to seating posture and steering wheel configuration is carried out to investigate the qualitative influence of the seating posture and driver's seat configuration on the steering behavior.

• Journal of the Korean Society for Library and Information Science
• /
• v.46 no.1
• /
• pp.241-261
• /
• 2012

The purpose of this study was to propose information services for people with disabilities in the culture and art complex. As a research method, group interviews were conducted. Data were collected from three different groups of people with physical disabilities, hearing impairments, and visual impairments in order to investigate specific information services for these groups of people. The results of the information services needed were indicated, based on four sections: the center web pages, information desk, orientation area, and information search area. Specifically, the results showed that more active supports would be provided at the information desks for people with hearing impairments and visual impairments as well as facilities for people with physical disabilities. In the orientation area, special equipment would be provided for people with hearing impairments and visual impairments, and exclusive seats for wheelchair users. For further studies, a detailed research about the information behavior for visitors with disabilities in the culture and art complex would be needed.

• Journal of The Korean Association of Information Education
• /
• v.18 no.2
• /
• pp.325-334
• /
• 2014

There are management and price problems that have been caused by requirement of RFID reader, Fingerprint Identification System and Clicker for the construct of automatic attendance system to check the students' attendance accurately and quickly. Therefore, in the thesis, we developed smartphone based attendance check system by utilizing Wi-Fi and the smartphones that has been already built without using additional equipments and establishing construction of system additionally. It recognizes date, time, location and the seat number in classroom if a student logs the attendance chocking application in and it also allows students to get lecture feedback and check attendance by taking quizzes and questionnaires that are related to the lecture. As a result, by applying the attendance check system, instructors state that it is convenient since the app allows instructors to communicate with students though the quizzes and questionnaires. Especially, the instructors state that it is convenient because the results of the quizzes, questionnaires and attendance can be downloaded it the from of Excel files.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.135-141
• /
• 2006

In order to prevent traffic accident, it is very important that the driver regulates the location of rear view mirror using the automatic seat regulation system which guarantees the maximum vision of the possibility for accuracy. In order to solve this problem the paper deals with the automatic seat control system which guarantees comfortable and safe seating and good visual field. Also a automatic car seat control algorithm has been developed to regulate the back mirror. Particularly, the automatic seat control algorithm function for the air bag operation in case of an accident has been added depending on passengers weight. Moreover when the driver passes a dangerous area an algorithm has been developed which gives the driver a naming sign and has been simulated in a ubiquitous environment. The simulation result proved that the Intelligence analysis for traffic accidents can reduce franc accidents more than 25% than the currently existing methods.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.32-75
• /
• 2013

도성은 왕권이 존재하는 것뿐만 아니라 왕권을 지지하는 지배계층이 모여 거주하는 곳이다. 그리고 중앙집권적 통일지배를 실현하기 위한 정치 의례의 장으로서 전근대 동아시아 세계에 공통적으로 건설되었다. 그 기원은 중국에서 유래하며, 일본은 율령제(律令制)를 바탕으로 하는 천황제 고대국가가 실현되는 7세기 말 '藤原京(후지와라쿄)'에서 처음으로 지상에 출현한다. 7세기 말부터 거의 1세기 간 복도제(複都制)가 채택되었기에 '등원경(藤原京)' 이후 도성은 여러 곳에 건설되었고, 때로는 천도되었다. 그러나 8세기 말 '長岡京(나가오카쿄)'에서는 복도제(複都制)를 지양했고, '平安京(헤이안쿄)'에 도읍을 정한 이후, 중세 근세를 거쳐 근대에 이르기까지 헤이안쿄-교토에는 1100년에 걸쳐 왕권이 지속적으로 존재하여 지금의 '京都市'(교토시)에 이르게 된다. '등원경(藤原京)'가 고대 일본 최초의 도성이었다면, '평안경(平安京)'는 마지막 도성임과 동시에 중세 도시로 변모해 가는 전환점에 위치하고 있다. '등원경(藤原京)'이래 남북축선에 대한 선대칭 구조를 의식해 도성이 축조 되었고, '평안경(平安京)'에서는 이러한 구조가 가장 강하게 표현되었지만, 9세기 초 천황과 관인들의 의식 정무의 동선이나 좌석 배치에 있어서 동서방향이 채용되게 되었고, 이에 더해 9세기 말에는 천황의 거소가 도성의 축선에서 벗어나게 된다. 또한 10세기 중반 경 '平安宮(헤이안큐)'에서는 '內裏(다이리)'를 중심으로 한 잦은 화재가 발생해 천황은 궁외로 거소를 옮기게 되었다. 이후 천황이 궁 바깥에 거주하는 것이 일반화 되었고, '평안궁(平安宮)'는 의식을 행하는 장소로서 한정적으로 유지 수리가 될 뿐이었으나 결국에는 그것마저 어려워져 폐쇄에 이르게 된다. 한편 귀족의 저택도 7세기 이래의 남북축선에 대해서 동서의 선대칭 구조로 부터, '寢殿造(신덴즈쿠리)'라고 불리는 건물배치도 공간구성도 비대칭인 건물양식이 주류를 이루어 갔다. 이상과 같이 일본의 고대 도성의 특징을 잘 가지고 있었던 최후의 도성 '평안경(平安京)'는 남북을 축선으로 하는 선대칭 구조가 가장 뚜렷하게 나타났으나, 9세기 '평안궁(平安宮)'의 변화를 시작으로 11~12세기에 크게 변모해갔다. 이처럼 고대국가의 도성이 가지고 있었던 남북을 축으로 하는 구조를 버리고 동서방향으로 동선을 취한 움직임은 고대국가의 이념을 탈피하여 다음 시대로 전환하는 중요한 한 걸음이었다고 생각된다.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.110-122
• /
• 2014

Korea's film industry has been growing over the last 10 years, and there has been much attention to the antecedents of film box office sales both academic and business communities. So far, previous research which explained success factors of film or movie mainly focused on 3 stages, production, distribution and screening. However, these 3 steps are heavily vertically integrated in Korea's firm industry unlike United States. Almost 130% of movie theaters are multiplex chain and operated by film production companies such as CJ and Lotte Entertainment In this situation, film sales are likely to he affected by movie theaters own facilities or location factors rather than movie contents. Based. on resource-based view and S-C-P paradigm, the authors examined "whether movie theater's facilities factors and trade area factors such as accessibility, competitive situation, and population have effect to movie theater's sales revenues. The results showed that the average occupancy of theater is the most important factor to movie theaters sales in both large and small cities. In large cities, movie theater's facilities factors which included vibration seat special sound system, premium movie theater, VIP lounge are relatively important than trade area factors. In contrast, in small cities, location factors and accessibility are the most important factors to movie theaters sales. We discuss the managerial and theoretical implication for the results and the specific limitations are suggested at the end of the paper.

• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.33-40
• /
• 2016

The purpose of this study is to improve social protection and benefits for pregnant women with the usage of LED care emblem. The study was conducted in the Seoul Metro by two research assistants on January 20th to 30th, 2015. One of subjects wore the LED care emblem and the other was present to record the data. An experiment was carried out total 60 times by wearing LED care emblem in 2 positions ((a) necklace and (b) bag), and 3 usages of Light ((1) Constant light, (2) No light which is like existing care emblem, and (3) blinking light at one-second intervals). Experimental results show there was a significant difference depending on the type of light. Mostly seat offering was the type of light (1) Constant light and it has 8 times (13.4%). The type of light (3) blinking light at one-second intervals has only 2 times (3.4%) seat offering. However, there were no seat offerings at the type of light (2) No light. Meanwhile, there were no significant differences in wearing position, time, the number of people in the train and gender. This study suggests that it is necessary to make LED care emblem with constant light in order to induce spontaneous seat offering.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.1069-1078
• /
• 2008

The purposes of this study were to identify the consumer behavior using in campus specialty coffee shop and to establish the marketing strategies through Importance-Performance Analysis (IPA) of service quality. Questionnaires were distributed to 725 students at K University located in Masan, from April 23 to May 3, 2007. Finally, 621 questionnaires were included in the final analysis (response rate: 85.7%). For statistical analysis, SPSS (12.0) was used to conduct the descriptive analysis, t-test, factor analysis and reliability test. The results of this study were as follows. The average cost of using specialty coffee shop in campus was \ 2,096, the average staying time was 25.92 min and the average number of visits per month was 2.17 times. The importance level of 'employee's attitude', 'physical environment', 'sensory quality of coffee', 'beverage features', 'representativeness' were 3.88, 3.79, 3.73, 3.67, 3.28 points, respectively. Also, the performance level of 'sensory quality of coffee', 'beverage features', 'employee's attitude', 'physical environment', 'representativeness' were 3.13, 3.06, 3.05, 2.77, 2.61, respectively. The importance and performance levels of service quality of specialty coffee shop in campus were significantly different (p<.001). Establishment of marketing strategies for in campus speciality coffee shop was possible through the IPA of service quality. Strategies for improving customer satisfaction were to secure enough chairs/ tables, to procure comfortable chairs for customer and to ensure the quality of coffee bean and service of employee.