Triploids are a useful tool for biomass production and molecular breeding of trees with a long life span. Triploids of the poplar 'Hyunsasi' (Populus alba ${\times}$ P. glandulosa) have been developed by crossing between female diploids and a male tetraploid. The tetraploid was developed around the 1970s at Korea Forest Research Institute by colchicine-induced chromosome doubling. Seedlings of the $F_1$ generation were analyzed using flow cytometry to verify their ploidy status. The mean relative fluorescence index of 3 F1 poplars, labeled as Line- 1, Line-17, Line-18, were approximately 1.5 times higher than those of diploid poplars, and the results clearly indicated that they were triploids. The phenotype of the F1 poplars included larger leaves and thicker stem than diploids, and abnormal leaf morphology, especially in the triploid 'Line-18'. Three triploid lines developed roots more slowly and had less roots than diploid. However, 3 poplar cytotypes (2x, Line-1, Line-17) rooted within 10 days on MS medium. In contrast, compared with the 3 cytotypes, the Line-18 showed about 80% and 70% in the rooting rate and the number of roots. The triploid poplars could be directly utilized for biomass production and with their sterility, they could serve as basic material for genetic transformation. In addition, flow cytometric analysis proved to be an effective and reliable method for screening forest trees for their ploidy level.
A condition evaluation procedure for the pavement foundations using multi-load level Falling Weight Deflectometer(FWD) deflections is presented in this paper. A dynamic finite element program incorporating a stress-dependent material model, was used to generate the synthetic deflection database. Based on this synthetic database, the relationships between surface deflections and critical responses, such as stresses and strains in base and subgrade layers, have been established. FWD deflection data, Dynamic Cone Penetrometer(UP) data, and repeated load resilient modulus testing results used in developing this procedure were collected from the Long Term Pavement Performance (LTPP) and North Carolina Department of Transportation (NCDOT) database. Research effort focused on investigation of the effect of the FWD load level on the condition evaluation procedures. The results indicate that the proposed procedure can estimate the pavement foundation conditions. It is also found that structurally adjusted Base Damage Index (BDI) and Base Curvature Index (BCI) are good indicators for the prediction of stiffness characteristics of aggregate base and subgrade respectively. A FWD test with a load of 66.7 kN or less does not improve the accuracy of this procedure. Results from the study for the nonlinear behavior of a pavement foundations indicate that the deflection ratio obtained from multi-load level deflections can predict the type and quality of the pavement foundation materials.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2010.06a
/
pp.306-306
/
2010
21 세기는 언제, 어디에서, 누구나가 정보를 자유롭게 염가에 이용할 수 있는 유비쿼터스 정보사회가 될 것으로 예상하고 있다. 이러한 유비쿼터스 사회가 실현되기 위해서는 필연적으로 대두되고 있는 과제가 에너지 공급원의 문제이다. 휴대용 전자제품이나 소형 에너지 공급원으로 지금까지 주로 전지가 사용되어 왔지만 이것들은 교환 및 충전이 불가피하다. 이러한 불편함을 개선하기위해 교환과 충전이 불필요하거나 아주 장시간동안 공급해주는 형태의 에너지 공급원의 필요성이 대두되고 있다. 이러한 에너지 공급원으로 최근에 많은 연구가 되고 있는 것이 주위의 환경으로부터 버려지는 에너지를 수확(harvesting)하여 전력으로 변환하는 에너지 하베스팅 (energy harvesting)기술이 연구 개발되고 있다. 에너지 하베스팅 응용을 위해서 사용되어지는 압전 세라믹스는 전압출력계수 ($g_{33}$)가 커야하는데 이것은 압전상수 ($d_{33}$)와 유전상수 (${\varepsilon}_{\tau}$)의 값에 영향을 받는 것으로 알려져있다. 그 중에서 우수한 전기적 특성 때문에 PZT를 기반으로 하는 압전 세라믹스가 사용되어져왔다. 그러나 Pb의 높은 유독성과 Pb를 포함하는 제품들의 처분문제들로 인해 제조에 관한 많은 문제점들을 지니고있다. 그리하여, Pb를 포함하지 않는 Pb-free계에 관한 연구가 전세계적으로 활발히 진행되고 있다. 다양한 Pb-free계 후보자들 가운데 $K_{0.5}Na_{0.5}NbO_3$ (KNN)는 높은 큐리온도와 좋은 강유전 특성 및 압전특성 때문에 PZT를 대체할 가장 장래성있는 대안들 중의 하나로 고려되고 있다. 그러나 고온에서 알칼라인 원소들의 높은 휘발성 때문에 보통의 소결공정으로는 소결이 잘되고 치밀한 세라믹스를 얻기가 어렵다. 많은 연구에서 KNN 세라믹스의 소결성을 개선하기 위하여 강유전 또는 반강유전체인 $SrTiP_3$와 $LiTaO_3$를 고용체 형성에 포함시키고 또한 $K_4CuNb_8O_{23}$, $MnO_2$, CuO등과 같은 소결조제를 첨가하여 압전 특성과 소결성을 개선시켰다. 따라서 본 연구에서는 비화학양론적 (1-X)[$[(K_{0.5}Na_{0.5}]_{0.97}(Nb_{0.96}Sb_{0.04})O_3]$ + 0.008CuO + 0.2wt% $Ag_2O$ + X $CeMnO_3$의 조성을 사용하여 A사이트와 B 사이트에 각각 Ce이온과 Mn 이온의 치환량을 변화하여 그에 따른 유전 및 압전특성을 조사하였다.
The purpose of this study was to investigate optimum cooking and ingredient mixing ratio of Jeonbok- and Obunjaki-jooks. It is traditional in Cheju island to prepare Jeonbok-jook with viscera and to use Obuniaki in stead of Jeonbok because of its abundance and economic advantage. Therefore, an attempt was made to search the optimum ingredient ratio, especially the amount of viscera in Jeonbok-and Obunjaki-jooks. By proximate analysis, feonbok and Obunjaki had the same nutritional composition, but the viscera of Obunjaki had more lipid than that of Jeonbok. All nutrients except to total sugars increased with the increase of meat and viscera in leonbok- and Obunjaki-jooks. However Obunjaki-jook showed the better protein quantity In sensory evaluation, as meat ratio increased, the intensity of savory taste and overall acceptability increased. Jeonbok- and Obunjaki- jooks with 40% meat without viscera had the best savory taste and overall acceptabilit y. Jeonbok- and Obunjakijooks with 4% viscera had better overall acceptability than those without viscera, regardless of meat ratio.
The purpose of this study was to evaluate the light microscopic features and the maximum insertional and removal torque value of microimplants, made from titanium grade 2 or 4, in the tibia of 6 rabbits. First, the maximum torque values of microimplants at implantation were measured. After 2, 8, and 12 weeks of healing time, the microimplant-containing segments of tibia of 2 rabbits were removed and the maximum removal torque of each microimplant were measured. Comparisons of histologic examination and insertional and removal torque values were carried out for the two groups of microimplants. Removal torque values were significantly increased in both groups after 8 and 12 weeks as compared to 2 weeks after implantation. Other values measured did not show any statistically significant differences and there were no histological differences between grade 2 and 4 titanium. Based on these results, this study showed that there were no significant differences between grade 2 and 4 titanium. It seems better to use grade 4 titanium for making microimplants because grade 4 titanium is mechanically harder than grade 2 titanium and has similar retention.
The SrBi$_2$Nb$_2$O$_{9}$ (SBN) thin films were deposited on p-type(100) Si substrates by rf magnetron sputtering to confirm the Possibility of Pt/SBN/Si structure for the application of nondestructive read out ferroelectric random access memory (NDRO- FRAM). The SBN thin films were deposited by co-sputtering method with Sr$_2$Nb$_2$O$_{7}$ (SNO) and Bi$_2$O$_3$ ceramic targets. The SBN thin films deposited at room temperature were annealed at $700^{\circ}C$ for 1hr in $O_2$ ambient. The structural and electrical properties of SBN with different power ratios of targets were measured by x-ray diffraction(XRD), scanning electron microscopy(SEM), capacitance-voltage(C-V), and current-voltage(I-V). The C-V curves of the SBN films showed hysteresis curves of a clockwise rotation showing ferroelectricity. When the Power ratio of the SNO/Bi$_2$O$_3$ targets was 120 W/100 W, the SBN thin films had excellent electrical properties. The memory window of SBN thin film was 1.8 V-6.3 V at applied voltage of 3 V-9 V and the leakage current density was 1.5 $\times$ 10$^{-7}$ A/$\textrm{cm}^2$ at applied voltage of 5 V The composition of SBN thin films was analysed by electron probe X-ray micro analyzer(EPMA) and the atomic ratio of Sr:Bi:Nb with pawer ratio of 120 W/100 W was 1:3:2.
In recent years, degenerative spinal instability has been effectively treated with a cage. However, little attention is focused on the stiffness of the cage. Recent advances in the medical implant industry have resulted in the use of medical carbon fiber reinforced polymer (CFRP) cages. The biomechanical advantages of using different cage material in terms of stability and stresses in bone graft are not fully understood. A previously validated three-dimensional, nonlinear finite element model of an intact L2-L5 segment was modified to simulate posterior interbody fusion cages made of CFRP and titanium at the L4-L5 disc with pedicle screw, to investigate the effect of cage stiffness on the biomechanics of the fused segment in the lumbar region. From the results, it could be found that the use of a CFRP cage would not only reduce stress shielding, but it might also have led to increased bony fusion.
Precipitation hardening nickel base alloys strengthened by intermetallic compounds are extensively used to manufacture on the components of the hot section of gas turbine engines. To ensure structural stability and maintenance of strength properties for a long time, nickel alloys are normally subjected to complex alloying with elements to form ${\gamma}'$(gamma prime). Such alloys have a limited weldability, are normally welded in high temperature. However, laser welding have a merit that applies in room temperature as easy control of welding parameter and heat input. In this study, $CO_2$ laser welding is applied on STS304 plate with good ductility and precipitation hardening nickel base alloy (GTD111DS) used blade material. Also, several welding parameters are applied on powder, power and travel speed. There are no cracks in Rene 80 and IN 625 powder when STS304 plate is used. But IN 625 powder has no cracks and Rene 80 have some cracks in welds with GTD111DS substrate. Adjusting of welding parameter is tried to apply Rene 80 having a good strength compare to IN 625. In the result of adjusted welding parameter, optimized welding parameters are set with low power, low feed rate and high welding speed. Tensile strength of GTD111DS substrate with Rene 80 powder is same and over than the one of base metal in room temp and high temp($760^{\circ}C$).
Proceedings of the Korean Vacuum Society Conference
/
2000.02a
/
pp.89-89
/
2000
AlN 박막은 Al과 N원자의 부분적 이온결합 특성을 가진 공유결합을 한 육방정계의 wurtzite 경정구조의 화합물 반도체로서, III-V족 반도체 중 가장 큰 에너지 갭(6.2 eV), 결정 구조적 이방성, 화학 양론적 결합구조, 높은 탄성종과 전달속도(약 10$\times$106 m/s)와 높은 열전도도, 고온 안정성, 가시광성.적외선 영역에서의 좋은 투과성과 높은 굴절률, 상온 대기압에서의 유일하게 안정적인 특성을 가지고 있어, 절연재료, 내열재료, 저주파 영역 센서의 압전 트랜스듀서, 광전소자, 탄성파 소자 및 내환경 소자, MIS소자 등으로 주목받고 있다. 본 연구에서는 BAW 공진기의 활용을 목적으로 반응성 마그네트론 스퍼터링 방법으로 AIN 압전박막을 제작하여, 증착 조건-질소 농도, 고주파 출력, 전체 스퍼터링 압력, 기판 온도-에 대한 박막의 특성을 조사하였다. AlN 박막의 c축 우선 방위 결정성 및 낮은 투과성, 적당한 굴절률의 특성이 BAW 공진기의 활용을 위한 요건이므로, 각각의 증착 조건하에 제작된 박막은 XRD의 $\theta$/2$\theta$ 스캔 회절상에 의한 결정성의 분석과 우선 성장 결정면의 rocking curve 및 XRD로 측정한 FWHM과 표준 편차로 결정성의 배열성과 소자 응용가능성을 조사하였다. 박막의 표면.단면 미세 구조 및 평활도는 SEM으로 관찰하였으며, Al-N 결합 상태는 XPS와 FT-IR로 분석 조사하였다. 제작된 AlN 박막의 결정성 분석 결과, c축 우선 방위 성장을 위한 스퍼터링 압력에 대한 임계 질소 농도와 임계 스퍼터링 압력이 관찰되었다. 전체 스퍼터링 압력이 6~8 mTorr의 범위에서 나타난 최소 임계질소 농도는 10%, 최대 임계 질소 농도는 60%이며, 4 m Torr 이하 10 m Torr 이상의 전체 스퍼터링 압력에서 박막의 우선 방위성장이 제재된다. 이는 AlN 박막이 형성에 관여하는 질소 이온 양의 충분한 형성에 필요로 하는 질소 가스의 유입량에 따른 것으로 판단된다. AlN 박막의 c축 결정면인 (002) 결정면의 성장을 유도하며 다른 방향으로의 성장을 제어하여 소자 활용에 유용한 박막을 제작하기 위한 고주파 출력은 300W 정도가 적당하며, 기판을 가열하지 않았을 때 낮은 투과도를 나타낸다. 본 연구에 의한 BAW 공진기 활용을 위한 AlN 압전박막의 제작을 위한 최적 증착 조건은 기판의 가열 없이 6~8 mTorr의 전체 스퍼터링 압력에 20~25%의 질소종도, 300W의 고주파 출력이다. 최적 조건에서의 AlN 박막은 약 0.19$^{\circ}$의 FWHM과 약 0.08$^{\circ}$의 표준편차를 가지며, 균일하고 조밀한 표면 미세구조와 주상정 구조의 측면구조, 파장에 대한 약 2.0의 굴절률, 낮은 투과도와 화학 양론적 구조를 가지는 우수한 박막이 형성되었다.
Park, Ik-Keun;Park, Un-Su;Kim, Chung-Seok;Kim, Hyun-Mook;Kwun, Sook-In;Byeon, Jai-Won
Journal of the Korean Society for Nondestructive Testing
/
v.21
no.4
/
pp.439-445
/
2001
The destructive method is reliable and widely used lot the estimation of material degradation but, it have time-consuming and a great difficulty in preparing specimens from in-service industrial facilities. Therefore, the estimation of degraded structural materials used at high temperature by nondestructive evaluation such as electric resistance method, replica method, Barkhausen noise method, electro-chemical method and ultrasonic method are strongly desired. Ultrasonic nondestructive evaluation technique has been reported good to attain efficiency of measurement, high sensitivity of measurement, and rapidity and reliability of result interpretation. In this study, it was verified experimentally the feasibility of the evaluation of degraded 2.25Cr-1Mo steel specimens which were prepared by the isothermal aging heat treatment at $630^{\circ}C$ by high frequency longitudinal wave method investigating the change of attenuation coefficient by FFT analysis and wavelet transform. Because of carbide precipitation increase and spheroidization near grain boundary of microstructure to aging degradation, attenuation coefficient had a tendency to increase as degradation proceeded. It was identified possibly to evaluate degradation using the characteristics of high-frequency ultrasonics. Frequency dependence of ultrasonic attenuation coefficient to aging degradation appeared large, which made sure that attenuation coefficient is an important parameter for evaluation of aging degradation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.