• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.133-137
• /
• 2001

급속한 인터넷의 확산으로 인해 다양한 멀티미디어 응용 서비스들이 등장하였다 영상회의, 인터넷 방송, VOD등과 같은 실시간 인터넷 멀티미디어 서비스들은 고속의 데이터 전송과 QoS 그리고, 멀티캐스트를 요구한다. 인터넷의 하부구조인 ATM 망에서 IP 멀티캐스트를 지원하기 위한 방안으로 MARS가 제안되었으며, 또한 최선형 서비스 기반의 인터넷에서 서비스의 품질을 보장하기 위하여 자원예약 신호 프로토콜인 RSVP가 제안되었다. 본 논문에서는 단일 MCS기반의 MARS가 가지는 문제점들을 보완하기 위해 2개 이상의 MCS를 가지는 다중 MCS MARS기반의 ATM 망에서 클러스터 내의 ATM 호스트가 특정 IP 멀티캐스트 그룹에 가입할 경우 MARS가 종단간 전송지연을 최소화하는 MCS를 할당하여 송신자와 수신자간에 최소의 전송지연을 가지도록 하고, MARS가 Resv 메시지를 수신했을 때, 자원예약 메시지를 처리할 수 있도록 그 기능이 확장된 MARS는 유지하고 있는 MCS 관리 테이블을 참조하여 MCS를 재 선정함으로써 인터넷 서비스의 QoS를 유지하고, MARS와 MCS의 처리 부하를 줄일 수 있는 방안을 제시하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.118-121
• /
• 2018

끊김 없는 이동성은 멀티미디어가 풍부한 실시간 서비스를 지원하는 미래의 무선 네트워크에서 필수적이다. SDN (Software Defined Networking)은 중앙 집중식 컨트롤러를 통해 무선 네트워크에서 세밀한 플로우 수준의 이동성 관리를 제공할 수 있지만 핸드오버 지연의 새로운 네트워킹 패러다임이다. 스플릿 포인트 방식은 SDN 무선 네트워크에서 핸드오버 및 종단 간 전송 지연을 줄이는 효과적인 방법이다. 스플릿 포인트는 트래픽이 새로운 AP (Access Point)를 향하여 핸드오버 한 후에 기존 플로우 경로상에 존재하는 스위치이다. 본 논문에서는 MN-CN (Corresponding Node) 경로의 각 스위치의 가중치를 스위치와 후보 AP 사이의 평균 고리(홉)로 계산하고 최소 가중치를 갖는 스위치가 스플릿 포인트로 선택된다. 스플릿 포인트 선택 외에도 이 논문은 SDN 에서 제공하는 제어 및 데이터 플레인 분리를 이용하여 핸드오버 후 플로우에 대한 최적의 경로를 복원한다. 제안 아이디어의 수치 해석은 이전 솔루션과 비교하여 총 비용이 9.6 % ~ 13 % 향상되었음을 보여준다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.939-941
• /
• 2008

오버레이 멀티캐스트는 IP 멀티캐스트와 달리 네트워크의 구조 변경 없이 종단 호스트가 자신이 받은 패킷을 다음 호스트에게 전달해 주는 방법을 사용한 어플리케이션 소프트웨어의 설치만으로 멀티캐스트를 제공받을 수 있는 기법이다. 오버레이 멀티캐스트는 일반적으로 delay에 민감하므로 효율적인 네트워크를 구성하기 위해서는 전체적인 지연시간을 감소시킬 수 있는 방안이 필요하다. 본 논문에서는 오버레이 네트워크에서 새로운 노드가 연결될 때 전체적인 지연시간을 감소시킬 수 있는 트리구성 방안에 대해서 제안하고자 한다.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.409-418
• /
• 2009

Providing Quality-of-Service (QoS) guarantee requires for each router on the path of a traffic flow not to violate the flow's delay budget allocated to itself. Since the amount of load being offered to the router is determined by the budget, some imbalance in load among routers on the path may be alleviated by means of adjusting the budget. The equal allocation applied to the resource reservation protocol (RSVP) is simple to implement, but it has the drawback of a poor resource utilization. A load balancing method in which the delay budget being allocated to a router depends on its load state was developed to improve the drawback, but it's too complex to apply to the RSVP. This paper proposes an intra-path load balancing method not only applicable to the RSVP but also more effective in improving the drawback. The proposed method first partitions the end-to-end delay bound of a flow to routers by the RSVP and then let them adjust their budgets according to both the bottleneck state of the path and their links' bandwidth availabilities. The results of the simulation applying the proposed method to an evaluation network showed that the proposed method may provide the gain of 4 ${\sim}$ 17 % compared to that in the legacy one in terms of the number of maximally admittable flows.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.876-884
• /
• 2012

This paper introduces two multi-hop delay factors which can be caused by conventional TDMA scheduling; queueing delay and delay by random link scheduling, and proposes a new sequential scheduling scheme to resolve these two factors. We also simulate the TDMA network with the proposed link scheduling scheme and compare it with conventional(random) link scheduling scheme in terms of end-to-end packet transmission delay. From the simulation results, the more the average hop distance increases, the more the difference of the delay performance of both scheduling schemes increases. When the average number of hops is 2.66, 4.1, 4.75, and 6.3, the proposed sequential scheduling scheme reduces the average end-to-end delay by about 22%, 36%, 48%, and 55% respectively when compared to the random scheduling scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1171-1176
• /
• 2016

VANET are a special kind of MANET adapted to the communications between vehicles. In this work, we propose the models used for representing the communication among vehicles, vehicles mobility features, and VANET simulator using realistic vehicular mobility models. VANET requires that a traffic and network simulator should be used together to perform this test. But, simulator tool has been preferred over traffic simulation because it simple, easy and cheap. Goal of this paper is to create a simulation of Vehicular Ad-Hoc network for urban scenario which can be used for testing purposes. Such environment can be used while designing better MAC protocols in VANETs. We are evaluating the performance of two routing protocols namely AODV and DSDV. The comparison was based on the throughout, packet loss and end-to-end delay. We found that DSDV has less throughput performance and high routing overhead than AODV. On average end-to-end delay and packet loss, AODV performs better than DSDV.

• Journal of KIISE:Information Networking
• /
• v.31 no.1
• /
• pp.91-100
• /
• 2004

This paper presents a receiver-driven TCP flow control mechanism, which is adaptive to the wireless condition, for memory constrained mobile receiver. A receiver-driven TCP flow control is, in general, achieved by adjusting the size of advertised window at the receiver. The proposed method constantly measures at the receiver both the available wireless bandwidth and the packet round-trip time. Depending on the measured values, the receiver adjusts appropriately the size of advertised window. Constrained by the adjusted window which reflects the current state of the wireless network, the sender achieves an improved TCP throughput as well as the reduced round-trip packet delay. Its implementation only affects the protocol stack at the receiver and hence neither the sender nor the router are required to be modified. The mechanism has been implemented in real environments. The experimental results show that in CDMA2000 1x networks the TCP throughput of the proposed method has improved about 5 times over the conventional method when the receiver's buffer size is limited to 2896 bytes. Also, with 64Kbytes of buffer site, the packet round-trip time of the proposed method has been reduced in half, compared the case with the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1164-1172
• /
• 2007

To solve scalability problem in the ZigBee Network, this paper presents a new mesh routing protocol for ZigBee, called ZigBee Cluster Label (ZiCL). ZiCL divides the ZigBee network into one or more logical clusters and then assigns a unique Cluster Label to each cluster so that it discovers a route of a destination node based on Cluster Label. When a node collects new Cluster Label information of a destination node according to discovery based on Cluster Label, ZiCL encourages nodes with the same Cluster Label to share the information. Consequen tly, it contributes on reducing numerical potential route discoveries and improving network performances such as routing overhead, end-to-end delay, and packet delivery ratio. Simulation results using NS-2 show ZiCL performs well.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.88-98
• /
• 2006

VANET has several different characteristics from MANET such as high mobility of nodes and frequent change of node density and network topology. Due to these characteristics, the network topology based protocol, often used in MANET, can not be applied to VANET. In this paper, we propose an emergency warning message broadcast protocol using range based relay node selecting algorithm which determines the minimal waiting time spent by a given node before rebroadcasting the received warning message. Because the time is randomly calculated based on the distance between sender node and receiver node, a node chosen as a relay node is assured to have a minimal waiting time, even though it is not located at the border of radio transmission range. The proposed emergency warning message broadcast protocol has low network traffic because it does not need to exchange control messages for message broadcasting. In addition, it can reduce End-to-End delay under circumstances of low node density and short transmission range in VANET.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.530-540
• /
• 2015

Industrial WSNs need great performance and reliable communication. In industrial WSNs, cluster structure reduces the cost to form a network, and the reservation-based MAC is a more powerful and reliable protocol than the contention-based MAC. Depth-based TDMA assigns time slots to each sensor node in a cluster-based network and it works in a distributed manner. DB-TDMA is a type of depth-based TDMA and guarantees scalability and energy efficiency. However, it cannot allocate time slots in parallel and cannot perfectly avoid a collision because each node does not know the total network information. In this paper, we suggest an improved distributed algorithm to reduce the end-to-end delay of DB-TDMA, and the proposed algorithm is compared with DRAND and DB-TDMA.