• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.60-66
• /
• 2020

Torrential rain causes landslide damage every year. In particular, the 2011 downpour caused landslides at numerous points throughout Mt. Woomyeon, which resulted in considerable damage to people and property. Because it occurred in an urban area, this case became a major social issue and received public attention. Measures were quickly implemented for multilateral investigations and recovery. Landslides caused by heavy rain are greatly affected by rainfall at the time. Landslides from the upper part erode the flow path, increasing the size, causing much damage to the lower part. This study selected a rural village area among the damaged areas of Mt. Woomyeon, and analyzed the change in terrain profile before and after a landslide using the DSM data obtained from airborne LiDAR. This area can be divided into three hydrological basins. For each basin, the analysis was performed on the average slope of each part of the flow path, as well as the erosion and deposition due to soil flow. As a result of the analysis, it was estimated that the total amount of soil from the Jeonwon village was 15,300㎥. These field data based on GIS can be used as basic information to predict damage in the case of a similar disaster, and it can be helpful in analyzing the results of various debris flow simulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.509-516
• /
• 2020

Since the 1960s, many rivers have been polluted and destroyed due to river repair projects for economic development and the covering of small rivers due to urbanization. Many studies have analyzed rivers using measured river topographic factors, but surveying is not easy when the flow rate changes rapidly, such as during a flood. In addition, the previous research has been mainly about the cross section of a river, so information on the longitudinal profile is insufficient. This research used informational entropy theory to obtain an equation that can calculate the average river slope, river slope, and river longitudinal elevation for a river basin in real time. The applicability was analyzed through comparison with measured data of a river's characteristic factors obtained from a river plan. The parameters were calculated using informational entropy theory, nonlinear regression analysis, and actual data. The longitudinal elevation entropy equation for each stream was then calculated, and so was the average river slope. All of the values were over 0.96, so it seems that reliable results can be obtained when calculating river characteristic factors.

• 한국노년학
• /
• v.39 no.1
• /
• pp.169-188
• /
• 2019

In this study, the author utilizes longitudinal data of the recent 12 years to verify whether the absolute versus relative income of old age has a significant effect on their life satisfaction of life. The findings of this study show that there is a significant difference in life satisfaction of old age according to respondents' relative income of three reference groups based on their asset quintile and residental area and education. In the correlation analysis using the cross-sectional data, the absolute and relative income level was closely related to the life satisfaction. In the panel regression analysis using the 12 years longitudinal data from the Korea National Labour Panel dataset, the income level of counterparts in those reference groups appeared highly significant in determining the level of life satisfaction of the elderly. However, some demographic variables such as age and marital status did not have a statistically significant effect in the long-term perspective. The income of reference groups in terms of asset levels, education and region as well as their own past life satisfaction level had a significant effect on the elders' life satisfaction determination. These results suggest that the relative income hypothesis in terms of life satisfaction among the elderly is more valid than the previous absolute income hypothesis.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.97-106
• /
• 1994

The dependence of the electrical resistivity on the eutectic composition and growth rates was investigated in the unidirectionally solidified Sb-InSb and Sn-Bi eutectic alloy systems, which were generally classified into the groups of f-f and nf-f eutectic system. Sb-InSb alloys containing 26-34wt.% In and Sn-Bi alloys containing 53-65wt.%Bi were prepared in vacuum sealed in a silica tube, and then these were unidirectionally solidified. Electrical resistivity of the specimens prepared by cutting the crystal section in parallel with the transverse direction and by cutting in longitudinal direction was measured. As the growth rate increased, the Sb-InSb and Sn-Bi eutectic alloys showed that the resistivity of longitudinal to the growth direction was increased but that of transverse to the growth direction was decreased. In the case of Sb-InSb eutectic alloy, increas~ng the phase boundary area and decreasing the fiber directionallity caused to increase the $p \; \parallel$ , while increasing the phase boundary area increased the $p \; \\perp$ As expected, the eutectic microstructure could be analysed well in terms of electrical resistivity.

• Journal of the Korean association of regional geographers
• /
• v.2 no.1
• /
• pp.39-49
• /
• 1996

There is a limestone basin surrounded by the mountains consisted of Paleozoic sedimentary and metamorphic rocks in the Masung, Munkyung city, Kyungsangpook do. The purpose of this paper is to elucidate the geomorphic processes of the gentle hillslopes in the marginal piedmont of Masung basin. To do so, I analyzed deposits over hillslopes and the relation ship between the distance from the divide and the height(above sea level) at the longitudinal profile of the hillslope, and considered interrelation between the distributions of the gentle hillslopes(less than 230m) and lithology. Geomorphic processes of Masung basin are as follow: (1) The depth of deposits over hillslope increases toward downstream of the hillslope. Most gravels within deposits, whose lithology is limestone, are those eroded at the boundary(overthrust fault zone) between the back-mountain and the hillslope. Deposits at the outward margin of hillslope is well sorted. and moderately imbricated. (2) Hillslope at the margin of the basin(160-230m asl) is formed by the action of 'the flow with channel'. At the boundary between the soft rock(limestone; basin floor) and hard rock(sedimentary and metamorphic rock; back-mountain), the relatively weak limestone is eroded to fresh bedrock by the subsequent action of the overland flow, and therefore discontinuity in slope appeared. (3) After hills lopes were formed, sediments(boulders and fine material) produced during dissection in back-mountain buried deposits over hillslope. In conclusion, geomorphic processes of Masung basin is 'differential erosion due to differentiation of lithological hardness' having suggested as geomorphic processes of granitic basin. However it is not 'removal of weathering material due to sheetflow' but 'erosion due to the overland flow with channel'.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.576-587
• /
• 2012

As being actual physiognomical vegetation on Daegwang sand dune in Imjado, the widest area is occupied by Pinus thunbergii community planted as windbreak forest whereas those communities such as Robinia pseudoacacia community, Elymus mollis community, Imperata cylindrica var. koenigii - Elymus mollis community, Carex kobomugi community, Ischaemum antephoroides community, Imperata cylindrica var. koenigii community, Phragmites communis community, Imperata cylindrica var. koenigii - Calamagrostis epigeios community occupy as band shape or patch. According to the result of the data collected and analyzed based on phytosociological method regarding 74 plots of survey area, the species composition of Daegwang sand dune vegetation is classified total 10 vegetation units comprises 7 communities and 5 groups. The 7 communities are classified into Pinus thunbergii community, Robinia pseudoacacia community, Rosa rugosa var. rugosa community, Ischaemum antephoroides community, Carex kobomugi community, Calamagrostis epigeios community, and the sub-units of Pinus thunbergii communities are classified into 3 groups of Pteridium aquilinum var. latiusculum group, Elymus mollis group, Pinus thunbergii topical group and the sub-units of Calamagrostis epigeios communities are classified into 2 groups of Phragmites communis group, Calamagrostis epigeios tipical group. The zonation of vegetation from coastal line indicated with the order of Elymus mollis - Carex kobomugi, Carex pumila, Lathyrus japonicus - Calystegia soldanella - Vitex rotundifolia, Lathyrus japonicus, Ischaemum antephoroides - Rosa rugosa var. rugosa. According to the analysis result of longitudinal section, it was found to be those types with wide width herbaceous vegetation of foredune, smooth slope of foredune, lots of dune ridges with no structure were less vulnerable to erosion of sand dune and advantageous to its recovery.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.2
• /
• pp.113-128
• /
• 2024

Items of road tunnel PISD (Precise Inspection for Safety and Diagnosis) were reviewed and analyzed using newly enhanced MMS (Mobile Mapping System) technology. Possible items with MMS can be visual inspection, survey and non-destructive test, structural analysis, and maintenance plan. The resolution of 3D point cloud decreased when the vehicle speed of MMS is too fast while the calibration error increased when it is too slow. The speed measurement of 50 km/h is determined to be effective in this study. Although image resolution by MMS has a limit to evaluating the width of crack with high precision, it can be used as data to identify the status of facilities in the tunnel and determine whether they meet disaster prevention management code of tunnel. 3D point cloud with MMS can be applicable for matching of cross-section and also possible for the variation of longitudinal survey, which can intuitively check vehicle clearance throughout the road tunnel. Compared with the measurement of current PISD, number of test and location of survey is randomly sampled, the continuous measurement with MMS for environment condition can be effective and meaningful for precise estimation in various analysis.

• Survey Research
• /
• v.9 no.3
• /
• pp.71-91
• /
• 2008

Workplace Panel Survey(WPS) is the representative panel survey of workplace in Korea. WPS was newly sampled in 2005 and is to be used for the subsequent biennial survey. The main survey is divided into a questionnaire for human resources(HR) manager, a questionnaire for labor relations manager and a questionnaire for representatives of unions. The population of WPS 2005 included workplaces across the country with 30 or more employees. The WPS 2005 was composed of 1,905 workplaces including 290 workplaces in the public sector. The sample was selected by the stratified random sampling. Weighting process for the survey data was introduced to compensate for differential sampling and non-response rates. Personal interviews were conducted using the Computer Assisted Personal Interviewing(CAPI) system during visits by interviewers, along with survey via mail and e-mail concerning employment and financial issues. The CPAI system introduced for the WPS 2005 can by used for automatical detection for errors and inconsistencies which may occur during the survey process. The CAPI system played an important part in enhancing the reliability of the survey data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1011-1015
• /
• 2005

본 실험에서는 부력 조건이 달라질 때 단공방류구에서 정체수역으로 수평방류되는 부력제트의 거동을 규명하였다. LIF (Laser Induced Fluorescence) 시스템을 이용하여 수행하였는데, LIF 시스템은 고해상도의 이미지를 취득할 수 있어 데이터의 정확도가 높으며, 동시에 한 평면상의 농도장을 일시에 측정할 수 있는 장점이 있는 기술이다. LIF 시스템은 크게 세부분으로 구성되어 있는데 방출시스템, 포착시스템, 처리시스템이 그것이다. 실험 조건을 고려해서 온수를 이용하여 주변수와의 밀도차를 재현하였으며, LIF 시스템의 추적입자로 형광염료 Rhodamine B를 사용하였다. 또한, 실험 데이터 취득과정에서 필요한 검정과정을 수행하였는데, LIF 시스템에서 검정과정은 레이저 입사광의 강도가 불균등한 분포를 가지는 점과 주변수의 매질에 의한 근의 감쇠가 발생하는 문제를 해결하기 위한 것이다. LIF 시스템은 부력제트의 농도장을 매우 정밀하게 측정할 수 있는데, 방류밀도 Froude 수가 변함에 따라 측정된 순간이미지를 통해 제트의 진화과정을 상세하고 가시적으로 확인할 수 있었다. 검정과정을 거친 농도 종단면에서 중심선의 연장선이 LIF 시스템에 의해 측정된 순간이미지의 중심선 궤적과 거의 일치하는 것도 알 수 있었다. 또한 LIF 시스템을 통해서 취득된 단일수평부력제트의 궤적과 중심선 희석률을 기존의 상용모형인 VISJET과 CORMIX1에 의해 예측된 결과와 비교$\cdot$분석한 결과, 제트 중심선 궤적의 경우, LIF 시스템을 이용한 측정값은 대체로 VISJET 모형의 결과와 일치하는 것으로 밝혀졌다. 중심선 희석률의 경우, LIF 측정값은 대체로 CORMIX1 모형, Cederwall(1968)의 경험식과 일치하는 경향을 보였다.0\%$일 때가 밸브를 $60\%$와 $80\%$ 개폐시켰을 때보다 $0.3kg/cm^2,\;0.29kg/cm^2$ 낮게 나타나 밸브를 전체 개방 했을 때 관로내의 수압이 상수설계기준에 적합한 수압을 유지함을 알 수 있다. 상수관로 설계 기준에서는 관로내 수압을 $1.5\~4.0kg/cm^2$으로 나타내고 있는데 $6kg/cm^2$보다 과수압을 나타내는 경우가 $100\%$로 밸브를 개방하였을 때보다 $60\%,\;80\%$ 개방하였을 때가 더 빈번히 발생하고 있으므로 대상지역의 밸브 개폐는 $100\%$ 개방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.639-645
• /
• 2009

The objective of this research was to introduce the TPI approach for interpreting land-forms of mountain forests in South Korea. We develop an objective procedure to decide the scale factor as a basic analytical unit in land-form classification of rugged mountain areas using TPI. In order to determine the scale factor associated with the pattern of slope profiles, the gradient variance curve was derived from a revised hypsometric curve developed using the relief energy of topographic profiles. Using the gradient variance curve, found was the grid size with which the change in relief energy got the peak point. The grid size at the peak point was determined as the scale factor for the study area. In order to investigate the performance of the procedure based on the gradient variance curve, it was applied to determination of the site-specific scale factors of 3 different terrain conditions; highly-rugged, moderately-rugged and relatively less-rugged. The TPI associated with the corresponding scale factors by study site was, then, determined and used in classifying the land-forms. According to the results of this study, the scale factor gets shorter with more rugged terrain conditions. It was also found that the numbers of valleys and ridges estimated with TPI show almost the same trends as those of the observed and the scale factors tends to approach to the mean distance of ridges.