• Journal of the Korean Society of Tobacco Science
• /
• v.2 no.2
• /
• pp.44-50
• /
• 1980

The growth of flue-cured tobacco was analyzed with the mathematical treatment. The results are summarized as followings: 1. The growth curve was fitted to the quadratic polynomial equation in improved-mulching cultivation, blot to the Gompertz equation in the other cultivations. 2. The initial point of the maximum growth phase for dry weight was about 50 days after transplanting in improved-mulching cultivation, but about 40 days in the other cultivations, and the maximum growth period was for 25 days in all cultivations. 3. The growth rate of the maximum growth period in dry weight decreased in the order of improved-mulching cultivation, mulching cultivation, and non-mulching cultivation. 4. A relative growth amount in the maximum growth period was higher in later sowing. 5. The length of maximum growth was 5 days shorter in leaf area than in dry weight. The maximum growth phase was 7 days earlier in leaf area than in dry weight.

• Research in Plant Disease
• /
• v.14 no.3
• /
• pp.219-222
• /
• 2008

Real time PCR was used to discriminate Colletotrichum acutatum and C. gloeosporioides for analysis of population density. Two primers, caInt2 and cgint, used for conventional PCR to discriminate two species were modified with fluorescent dye to make probe for real time PCR. Fluorescence signals were successfully detected by fCaInt2 and vCgint probe coupled with primer pair Unicon and Unicor1 resulting in discrimination of C. acutatum and C. gloeosporioides by comparison of delta Rn value.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.333-344
• /
• 1995

Cu를 함유한 2종의 저합금 고장력강(HSLA-A, HSLA-B)\ulcorner 기계적 성질에 미치는 시효처리의 영향을 조사하였다. 탄소량이 적음에도 불구하고 Cu첨가로 석출물을 생성시킴으로서 2합금 모두 $650^{\circ}C$에서 시효한 경우 양호한 강도(HSLA-A:Y.S 703Mpa, E.L 22.6% HSLA-B:Y.S 810 Mpa, E.L 23.8%)와 인성(HSLA-A:271.4J, HSLA-B:197.5J at -5$0^{\circ}C$)의 조합을 나타내었다. 50$0^{\circ}C$에서 시효할 때 가장 높은 항복 강도를 나타내나 인성은 아주 낮은 값을 나타내었다. 50$0^{\circ}C$이상 시효 온도가 증가하면 강도는 감소하고 인성은 증가하였다. HSLA-B강의 강도가 HSLA-A 강보다 높은데, \ulcorner칭 상태에서의 강도 차이는 경화능을 증가시키는 원소인 Ni, Mn, Mo, Cu의 첨가량 차이에 의한 기지 조직의 차이에 의한 것이며, 시효한 상태에서의 강도 차이는 기지 조직과 석출 강화에 기여하는 Cu량의 차이에 의한 것으로 판단된다. 시효 경화 곡선에서 $700^{\circ}C$에서의 경도 증가는 오스테나이트-페라이트 2상 영역으로부터 냉각시 생성된 “M-A constituents”에 의한 것이다. HSLA-A강과 HSLA-B강의 충격 천이 온도는 각각 -1$25^{\circ}C$와 -145$^{\circ}C$이었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.983-989
• /
• 2005

[ $PZT(Pb(Zr,Ti)O_3)$ ] thin films were deposited by multi-target reactive sputtering method on $RuO_2$ substrates. Pure perovskite phase PZT films could be obtained by introducing Ti-oxide seed layer on the $RuO_2$ substrates prior to PZT film deposition. The PZT films deposited on the $RuO_2$ substrates showed highly voltage-shifted hysteresis loop compared with the films deposited on the Pt substrates. The surface of $RuO_2$ substrate was found to be reduced to metallic Ru in vacuum at elevated temperature, which caused the formation of oxygen vacancies at the initial stage of PZT film deposition and gave rise to the voltage shift in the P-E hysteresis loop of the PZT capacitor. The fatigue characteristics of the PZT capacitors under unipolar wane electric field were different from those under bipolar wane. The fatigue test under unipolar wane showed the increase of polarization. It was thought that the ferroelectric domains which had been pinned by charged defects such as oxygen vacancies and the charged defects were reduced in number by combining with the electrons injected from the electrode under unipolar wave, resulting in the relaxation of the ferroelectric domains and the increase of polarization.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.93-102
• /
• 1992

In this paper presented is the reliability analysis of a double skinned hull structure against the ultimate bending moment and fatigue strength under longitudinal bending. The ultimate bending strength is obtained through the beam-column approach in which the load-end shortening curves(stress-strain curves) of stiffened plates under mini-axial compression are derived using the concept of plastic hinge collapse. The fatigue damage only is considered as fatigue failure for which the Miner's damage rule is employed. Assessed are fatigue reliability for the possible joint types found at deck structure. Also included is the reliability analysis of a series system of which elements are ultimate and fatigue failure.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.537-548
• /
• 2010

Recently the Government has announced updated water quality standards for wastewater treatment effluent (become effective in 2012). That includes highly enforced regulations for T-P, BOD and COD, and a large budget, in particular for phosphorus removal, was set by the Ministry of environment. Chemical coagulation destabilizes colloidal particles so that particles grow to larger flocs, and solid particles are removed by solid-liquid separation. The efficiency of chemical coagulation depends on a various factors, including coagulant types and costs, construction and operation costs for the treatment facilities and so on. The proper selection should be based on the treatment efficiency of coagulants and underlying costs. The current research was to evaluate the treatment efficiencies of coagulants on a variety of wastewater influents and to develop saturation curves for several water quality parameters. Typical $Al_2(SO_4)_3$ and $FeCl_3$ were tested under a range of coagulant concentrations. The pollutant removal efficiencies of chemical treatment both for the $Al_2(SO_4)_3$ and $FeCl_3$ were especially high for T-P, followed by SS, BOD and COD. Correlation test also proved the highest relationship between SS and T-P.

• Journal of Environmental Science International
• /
• v.14 no.4
• /
• pp.389-395
• /
• 2005

The changes of O-J-I-P transients were investigated using leaves of four subtropical plant species (Crinum asiaticum var. japonicum, Osmanthus insularis, Chloranthus glaber and Asplenium antiquum) under the natural conditions in winter, in order to select the stress indicators for diagnosing physiological states of plants under low temperature. In the O-J-I-P transients of these species, the fluorescence intensity was found to be higher in O-step and lower in P-step in winter than in summer. Particularly, the fluorescence intensity of the P-step in Crinum asiaticum var. japonicum was lower than those of other three plant species, indicating that Crinum asiaticum var. japonicum is the most sensitive to low temperature. Of the chlorophyll fluorescence parameters derived from O-J-I-P transients of four subtropical plants, Fm, Fv/Fo, ABS/CS, TRo/CS, $\phi_{po}$ and $\phi_{po}/(1-\phi_{po})$ decreased significantly with the increase of Fo, Sm, N, EToICS, ETo/RC and $\psi_o/(1-\psi_o)$ depending on temperature drop in winter. Therefore, these parameters could be used as indicators for estimating low temperature stress and diagnosing physiological states of plants under the natural conditions in winter.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.297-297
• /
• 2019

최근 기후변화로 인해 전 세계적으로 태풍 및 국지성 집중호우로 인한 피해가 급증하고 있으며, 그로 인한 2차 피해인 산사태와 토석류 피해 또한 빈번하게 발생하고 있다. 한국 또한 토석류로 인해 도심지역의 피해가 급증하고 있으며, 많은 인명피해 및 재산피해가 발생하였다. 현재 한국에서는 산림청의 산사태 예보기준 및 기상청의 호우예보 기준을 사용하고 있으나, 토석류에 대한 예보 기준과 시스템은 부재하다. 따라서 본 연구에서는 토석류 예보를 위해 토석류가 발생했던 피해사례 40종을 수집하여 토석류가 발생했던 시점에서의 누적강우와 강우강도를 이용하여 강우경보지수(Rainfall Triggering Index, RTI)를 산정하였다. 또한 RTI를 강우량의 함수인 한계누적강우량(Critical Accumulated Rainfall, Rc)으로 변환하여 토석류 발생위험지역에 거주하는 일반인들이 강우지수에 대한 이해도를 높이고자 하였다. 토석류 예보를 위하여 RTI 10, 70, 90%에 해당하는 한계누적강우량(Rc)을 산정하여 지속시간에 따른 Rc곡선을 작성하였으며 Nomograph를 이용하여 시간에 따른 토석류 예보 단계를 시각적으로 표출하였다. 또한 실제 토석류가 발생했던 인제, 서울, 청주의 사례에 대해 Nomograph를 작성하여 산림청, 기상청의 예보 기준과 비교 분석하였다.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.450-455
• /
• 2005

We have studied on operational characteristics of the nitrogen laser with sliding discharge and longitudinal excitation. We could observe radiation of nitrogen laser excited by a sliding discharge along the surface of a dielectric. The shape of the beam was a ring type which had 2 mm or 4mm in diameter depending on the sliding discharge tube shape. In this experiment, We show the possibilities to make other shapes of laser beam, for example, rectangle, ellipse, and to excite another gas laser system like an excimer laser.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.146-146
• /
• 2023

우리나라의 하천은 도시의 급격한 산업화와 공업화로 인해 이수, 치수 목적을 중심으로 관리되어왔다. 그러나 최근 기후변화의 가속화와 댐과 같은 인공 구조물로 인해 하천의 수질 및 흐름이 위협받으면서 하천 환경개선에 대한 문제가 사회적으로 대두되고 있다. 하천의 생태기능은 하천에서 살아가는 각종 생물의 서식 조건을 유지함으로써 하천이 환경적으로 건강한 상태를 유지하도록 하는데 중요한 역할을 한다. 따라서 하천 환경개선을 위해서는 하천 생태기능 유지를 위한 최적 유량을 확보해야 한다. 일반적으로 하천의 생태기능을 보존하는데 필요한 최적 유량에 대한 평가에는 USGS(United States Geological Survey)에서 개발한 어류에 대한 유량과 서식지 가용성사이의 관계를 바탕으로 하는 물리적 서식처 모형 (Pysical HABitat SIMulation, PHABSIM)이 널리 사용되고 있다. PHABSIM은 가중가용면적(Weighted Useable Area, WUA)과 유량의 관계곡선을 산출하여 생태유량을 산정할 수 있게 한다. 본 연구에서는 최근 10년 동안 어류 건강성 평가에서 낮은 등급을 받은 탄천 대왕교 지점을 대상으로 PHABSIM을 이용한 어류의 계절별 최적 생태유량을 산정했다. 연구에 사용된 유량자료는 2012부터 2021년까지의 데이터가 사용되었다. 탄천의 대표 어종으로는 각 하천에서 우점종으로 선정된 Zacco platypus가 사용되었다. 각 연도별 그리고 계절별 하천 유량의 변화에 따른 환경생태유량 분석을 통해 제시된 각 하천의 최적 환경유지유량에 대한 결과는 한강권역 환경생태유량 산정 및 하천 관리를 위한 기초자료로 활용할 수 있을 것이다.