• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1187-1197
• /
• 1997

Dry gel composed of primary particles more homogeneous than starting boehmite powder was prepared by dispersing and gelling the boehmite powder. The transformation temperatures of boehmite powder, dry gel seeded with 0, 1, 3, 5 wt% $\alpha$-Al2O3, and ball milled gel were 1192$^{\circ}C$, 1184$^{\circ}C$, 1141$^{\circ}C$, 1119$^{\circ}C$, 1117$^{\circ}C$, and 1106$^{\circ}C$, respectively. Sintering behavior of dry gel without seed was similar to that of boehmite powder, but the sintered density of dry gel was improved as much as 10%~15% than boehmite powder. In the case of dry gel seeded with 5 wt% $\alpha$-Al2O3, sintering behavior was much improved. The relative density of the gel seeded with 5 wt% $\alpha$-Al2O3 was 96% when sintered at 140$0^{\circ}C$ for 1h. On the other hand, ball milling of the non-seeded sol for 48h resulted in the relative density of 97% when sintered at 130$0^{\circ}C$ for 1h. The size and amount of $\alpha$-Al2O3 particles added by ball milling were 0.107 ${\mu}{\textrm}{m}$ and 0.5 wt%.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.96-100
• /
• 1990

코디에라이트($2MgO,2Al_{2}O_{3},5SiO_{2}$)는 다층 IC 기관용 재료로써 최근에 큰 관심을 갖고 연구되어지고 있다. 졸겔법에 의해서 합성된 코디에라이트 기판위에 구리층을 만들고 동시 소성 분위기와 소성 온도 변화르 통해서 접합면의 형태변화를 분석함으로써 접합력이 우수한 소성 조건을 찾아보았다. 수분을 함유한 Ar가스( $Ar+H_{2}O$) 분위기에서 동시 소성하는 경우 좋은 접합 특성을 보여 주었으며 특히 접합 특성 향상에 승온 속도가 큰 영향을 미친다.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.679-684
• /
• 2009

Phosphors of $Eu^{2+}$ doped alkaline earth aluminates MA$l_2O_4:Eu^{2+}$ (M=Sr, Ba, Ca) have been prepared by sol-gel process and their characterization of photoluminescence and photocurrent properties have been performed. The phosphors prepared by sol-gel process, due to its advantage of better homogeneity and low synthetic temperature, was synthesized as single phases at lower temperature than the solid-state process; $800{\sim}1000{^{\circ}C}$ for 6 h under mild reduction atmosphere (Ar- 3% $H_2$). It was confirmed that SrA$l_2O_4:Eu^{2+}$ composition revealed the most excellent properties in the brightness and photocurrent.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.59-60
• /
• 2009

PAI-CS 나노하이브리드 절연코팅의 표면접착과 기계적 강도 및 내아크 내구성에 대하여 실험 분석하였다. 졸-겔법으로 PAI의 강화입자로 선택한 나노 CS는 메트릭스 수지와의 상안정성이 잘 이루어졌다. 나노경도를 측정한 결과 순수 PAI수지와 비교하여 CS첨가량이 증가함에 따라 경도와 탄성율 그리고 강성이 개선되고 있다. 한편 실란처리 방법에 따라 경 도와 탄성율의 개선폭이 달라지는 경향이 있어 제조시 적절한 실란처리에 의한 표면제어가 필요한 것으로 나타났다. 전기적 표면 내아크시험에서 순수 수지와 비교하여 우수한 내구성을 가지고 있어서 이는 서지와 부분방전 등에 노출되는 전력용 절연 코팅으로 사용이 기대된다.

• 한국전기전자재료학회논문지
• /
• 제25권4호
• /
• pp.315-320
• /
• 2012

In general, a photoelectrode in DSSC(dye sensitized solar cell) are fabricated by using the $TiO_2$ (Titanium dioxide) to realize high efficiency and the efficiency of DSSC is affected by the size, the shape and the property of $TiO_2$. We synthesized the crystalline $TiO_2$ by sol-gel method. In spite of many merits, only weakness for the sol-gel method is taking many process times. To solve this problem, we reduced the fabricating processes. The reduced process is the making process that is $TiO_2$ sol to $TiO_2$ powder with including of two heat treatment and two mixing. We could simplify the process by preparing $TiO_2$ sol to $TiO_2$ paste directly. As a result, DSSC fabrication process is simplified and we have obtained the efficiency best result 3.88% with $V_{OC}$=0.71 V, $J_{SC}=8.70\;mA/cm^{-2}$, and FF=62.37%, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.122-122
• /
• 2010

백색 유기발광소자를 제작하기 위한 여러 가지 유기물층을 사용할 때 제작공정이 어려워지고 유기발광소자의 발광 효율이 저하되고 색안정성이 나빠지는 문제점이 있다. 본 논문에서는 Zn2SiO4:Mn 무기물 형광체를 사용한 유무기 혼성 유기발광소자를 제작하고 발광 메카니즘을 조사하였다. 색변환층으로 사용되는 Zn2SiO4:Mn 형광체는 졸겔 방법을 사용하여 형성하고 비이클용액 및 열처리 공정을 사용하여 유리기판 위에 도포하였다. 형성된 Zn2SiO4:Mn 형광체 층에 대하여 X선 회절측정한 결과는 형광체내의 Zn 이온이 도핑된 Mn 이온에 대체되었음을 보여준다. 제작된 진청색 OLED의 전계발광 스펙트럼은 461 nm 에서 peak 을 나타내고 Zn2SiO4:Mn 무기물 형광체는 470 nm에서 여기 되어 Mn 이온의 4T1-6A1 전이에 의하여 527 nm에서 발광을 한다. Zn2SiO4:Mn 무기물 형광체를 사용한 유기발광소자의 전계발광스펙트럼에서 나타나는 527nm peak 은 Zn2SiO4:Mn 무기물의 색변환에 의해 나타난 결과로서 제작된 유기발광소자에서 발광된 빛을 청색에서 녹색으로 변환한 결과이다. Zn2SiO4:Mn 무기물 색변환층을 사용하여 제작된 무기물/유기물 유기발광소자의 발광 메카니즘은 전계발광스펙트럼 및 광루미네센스 스펙트럼 결과를 기초로 설명하였다. 이 결과는 녹색 무기물 형광체를 진청색 유기발광소자와 결합하여 제작된 유기발광소자의 발광색을 조절할 수 있음을 보여주었다.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.967-972
• /
• 2004

Hardness and surface property of coated gel materials are considerably different according to kinds(particle size/stabilized ion) of colloidal silica(CS), kinds of silanes, content ratio of silane versus CS, and reaction degree in sol solution. We report the properties of sol-gel coating materials in which the factors of reaction are kinds of CS, contents ratio of CS and MTMS, and reaction time of sol. The contact angles of the coated films obtained from the mixed CS system showed a little good relationship with MTMS content increase to those from HSA CS reaction system and the change of contact angle didn't have much effect on reaction time of sol. In the coating films obtained from HSA CS reaction system, the surface was much rough in case of that the content MTMS decreased and the reaction of sol kept long. The surface roughness of films obtained from the mixed CS reaction system showed similar tendency, though its degree was a little different. In synthesis of sol-gel coating materials, we could identify that choice of CS kinds and content ratio of CS and silane were important and it was desirable the reaction time of sol is not long.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.947-952
• /
• 2004

Tb-doped lead zirconate titanate(Pb(Zr$\_$0.6/,Ti$\_$0.4/)O$_3$; PZT) thin films on Pt(111)/Ti/SiO$_2$/Si(100) substrates were fabricated by the sol-gel method. The effect on the structural and electrical properties of films measured according to Tb content. The dielectric and ferroelectric properties of Tb-doped PZT thin films were altered significantly by Tb-doping. The PZT thin film with higher dielectric constant and improved leakage current characteristic was obtained by adding 0.3 mol% Tb. The relative dielectric constant and the dielectric loss of the 0.3 mol% Tb-doped PZT thin film were 1611 and 0.024, respectively. Typical value of the swichable remanent poaraization(2Pr) and the coercive filed of the PZT film capacitor for 0.3 mol% Tb-doped were 61.4 ${\mu}$C/cm$^2$ and 61.9 kV/cm, respectively. Tb-doped PZT thin films showed improved fatigue characteristics comparing to the undoped PZT thin film.

• 공업화학
• /
• 제10권3호
• /
• pp.491-495
• /
• 1999

졸겔법에 의하여 리튬전지용 $Ni_{0.2}V_2O_5$ aerogel (ARG) 양극 소재를 개발하여 전기화학적 특성을 조사하였다. ARG는 무정형의 층상화합물로 $400^{\circ}C$ 이상에서 열처리할 경우 orthorhombic 구조로 전환되었으며, 표면구조는 섬유 모양의 단위체가 서로 얽혀 일정한 방향으로 성장하여 비등방성 sheet를 형성하고 있다. 리튬 이온이 층간 삽입될 수 있는 다수의 특정한 에너지 준위의 자리가 ARG내에 존재하며, 전지의 평균전위는 3.1 V (vs. $Li/Li^+$) 이었다. ARG 리튬이차전지의 계면저항은 ARG층 내 리튬 몰분율에 상관없이 일정한 반면, 전하이동저항은 개로전압에서 최대이며 ARG내 리튬 이온의 농도가 증가할수록 증가하였다.