• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.433-441
• /
• 2017

The 3D printing selective laser sintering (SLS) and stereo lithography apparatus (SLA) method used for bone model production has good precision and resolution, but the printers are expensive and need professional knowledge for operation. The program that converts computed tomography digital imaging and communications in medicine (DICOM) file into STL (stereolithography) file is also expensive so requesting 3D printing companies takes a lot of time and cost, which is why they are not generally utilized in surgery. To produce bone models of fractured patients, the use of 3D imaging conversion program and 3D printing system should be convenient, and the cost of device and operation should be low. Besides, they should be able to produce big size bone models for application to surgery. Therefore, by using an fused deposition modeling (FDM) method 3D printer that uses thermoplastic materials such as DICOM Viewer OsiriX and plastic wires, this study developed 3D printing system for Fracture surgery Patients customized bone model production for many clinics to use for surgery of fracture patients by universalizing with no limit in printing sizes and low maintenance and production cost. It is expected to be widely applied to the overall areas of orthopedics' education, research and clinic. It is also expected to be conveniently used in not only university hospitals but also regular general hospitals.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.945-951
• /
• 1994

In order to elucidate the extrusion characteristics of $SiC_{p}$/6061 Al composite, defomation resistance, $K_{w}$ was determined using the empirical formula suggested by Watanabe et al, and also extrusion pressure was measured using the extrusion press with a capacity of 350 ton. The $K_{w}$ which are propotional to extrudability, was increased with increasing volume fraction of reinforcement, $SiC_{p}$, but decreased with increasing the particle size. The peaks of maximum extrusion pressure in curves of extrusion force vs ram stroke were changed sharply with decreasing the particle size. The elevated extrustion temperature resulted in the decreased $K_{w}$ and extrusion pressure, but caused the surface tearing of extrusion composite bars. The results showed that extrudability of the composite billets is depend on the extrusion conditions as well as the characteristics of reinforcement, $SiC_{p}$.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.49-58
• /
• 2006

This study is on the general characteristics of 'Monolithic' architecture. The intentions of monolithic architecture can be assumed as an attempt to replace the formal looseness or difficulties of understanding formal complexity of modern architecture, or a trial to react against contemporary avant-garde architectural tendency typically characterized as unstableness, uncertainty, fluidity, and articulation to reestablish autonomy of architecture. Buildings in this category coincide in their extreme economy and simplicity of overall form and consistency of external appearance while showing great expressional capacity with very limited formal means. Even though monolithic architecture still seems a little unstable and ambiguous in historical aspects, it can be considered as strikingly shaped objects or autonomous forms with identities, logics, and representation that promote recognition. Using architectural techniques of scale, colors, materials and finishes, monolithic architecture shows strategically invested surfaces that mediate between the inside and the outside, and shows unexpected and mysterious autonomy. This kind of monolithic approach is also found in interior space as a separate objects that contain functional space inside, or as formal elements that overflow the boundaries of conventional architecture by eliminating the distinction between floor, wall, and ceiling.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.4
• /
• pp.11-21
• /
• 2011

This paper proposes a method for decomposing a Hangul glyph of outline fonts into its initial, medial and final components using statistical-structural information. In a font family, the positions of components are statistically consistent and the stroke relationships of a Hangul character reflect its structure. First, we create the component histograms that accumulate the shapes and positions of the same components. Second, we make pixel clusters from character image based on pixel direction probabilities and extract the candidate strokes using position, direction, size of clusters and adjacencies between clusters. Finally, we find the best structural match between candidate strokes and predefined character model by relaxation labeling. The proposed method in this paper can be used for a study on formative characteristics of Hangul font, and for a font classification/retrieval system.

• The Korean Journal of Applied Statistics
• /
• v.23 no.6
• /
• pp.1067-1080
• /
• 2010

A number of methods have been developed to determine sample sizes in clinical trial, and most clinical trial organizations determine sample sizes based on the methods. In contrast, determining sufficient sample sizes needed for experiments using microarray chips is unsatisfactory and not widely in use. In this paper, our objective is to provide a guideline in determining sample sizes, utilizing reproducibility of real microarray data. In the reproducibility comparison, five methods for discovering differential expression are used: Fold change, Two-sample t-test, Wilcoxon rank-sum test, SAM, and LPE. In order to standardize gene expression values, both MAS5 and RMA methods are considered. According to the number of repetitions, the upper 20 and 100 gene accordances are also compared. In determining sample sizes, more realistic information can be added to the existing method because of our proposed approach.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.517-532
• /
• 2017

The transverse ventilation system, commonly applied to urban tunnel, is necessary to be distributed with airflow uniformly. In this study, we developed a program that can optimize the opening ratio of ports to ensure ventilation performance of design criteria through a uniform airflow distribution even though ventilation interval becomes longer. And program's prediction performance was verified by comparison with TUNVEN DUCT program. For comparison, Semi-transverse ventilation system was applied. Both programs predicted a similar port size and air flow distribution, and the variation range of the calculated values was 11.71% and 1.36%, respectively. This program is very useful for port optimization design of transverse and semi-transverse ventilation system, because it is possible to analyze various tunnel lengths and supply/exhaust port installation conditions.

• Journal of Powder Materials
• /
• v.27 no.2
• /
• pp.103-110
• /
• 2020

Aluminum (Al) - based powders have attracted attention as key materials for 3D printing because of their excellent specific mechanical strength, formability, and durability. Although many studies on the fabrication of 3D-printed Al-based alloys have been reported, the influence of the size of raw powder materials on the bulk samples processed by selective laser melting (SLM) has not been fully investigated. In this study, AlSi10Mg powders of 65 ㎛ in average particle size, prepared by a gas atomizing process, are additively manufactured by using an SLM process. AlSi10Mg powders of 45 ㎛ average size are also fabricated into bulk samples in order to compare their properties. The processing parameters of laser power and scan speed are optimized to achieve densified AlSi10Mg alloys. The Vickers hardness value of the bulk sample prepared from 45 ㎛-sized powders is somewhat higher than that of the 65 ㎛m-sized powder. Such differences in hardness are analyzed because the reduction in melt pool size stems from the rapid melting and solidification of small powders, compared to those of coarse powders, during the SLM process. These results show that the size of the powder should be considered in order to achieve optimization of the SLM process.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.5
• /
• pp.488-497
• /
• 1984

In the assembling process by industrial robots, many difficulties stem from the fact that the assembly operation is impossible or the parts to be assembled can be damaged by reaction forces due to even little misalignment in part mating. In this paper a flexible and sensible robot wrist is developed to make possible the precision insertion operation. The flexibility of the developed wrist were evaluated both analytically and experimentally in actual insertion process. The results show that without the use of feedback control the wrist is capable of doing insertion operations with a small clearance at a low inserting force. For smaller clearance the assembly process was devised involving insertion force feedback and a control algorithm for this active accommodation was developed. The simulation results show that if the active feedback control is used the insertion action can be performed with much less force, as compared with a passive accommodation method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.1-6
• /
• 2016

Image rotation is one of main pre-processing step in image processing or image pattern recognition. It is implemented with rotation matrix multiplication. However it requires lots of floating point arithmetic operations and trigonometric function calculations, so it takes long execution time. We propose a new high speed image rotation algorithm without two major time-consuming operations. It use just 2 shear translation operations, so it is very fast. In addition, we apply a parallel computing technique with CUDA. CUDA is a massively parallel computing architecture using prevailed GPU recently. As GPU is a dedicated graphic processor, it is exellent for parallel processing of pixels. We compare the proposed algorithm with the conventional rotation one with various size images. Experimental results show that the proposed algorithm is superior to the conventional rotation ones.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.313-336
• /
• 2007

Unlike a conventional railway system, a high-speed rail system experiences various aerodynamic problems in tunnel sections. Trains running at a high speed in a small tunnel, when compared with the open field, face significant air pressure, resulting in reduced operating stability and fast change in pressure inside the tunnel. These phenomena further cause some unexpected problems such as the passengers onboard feeling an aural discomfort and an impulsive noise at the tunnel exit. To solve these problems, this paper introduces analysis of aerodynamic characteristics for determination of tunnel cross section. The optimum cross-section that satisfies the criteria of aural discomfort was reviewed through lots of numerical simulation analysis. Also, the pressure inside the passenger car of a train operating on Kyungbu HSR line was measured, and the pressure inside the tunnel and the micro-pressure waves at tunnel exit were measured at Hwashin 5 Tunnel. At the same time, a test of train operation model was performed and then the measurement results and test results were compared to verify that various parameters used as input conditions for the numerical simulations were appropriate.