• The Journal of the Acoustical Society of Korea
• /
• v.23 no.3
• /
• pp.206-213
• /
• 2004

This paper presents a steering angle error compensation (SAEC) algorithm that is appropriate for rapidly moving sources. The Proposed algorithm utilizes a modal covariance matrix from multiple frequency components instead of the multiple snapshots in a narrowband SAEC, and estimates the steering error by maximizing the wideband WVDR output power using a first-order Taylor series approximation of the modal steering vector in terms of the steering error. As such, the steering error can be compensated with short observation times. Several simulations using artificial and sea trial data are used to demonstrate the Performance of the proposed algorithm.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.37-45
• /
• 1987

최근의 경량화 췌ㅅ로 말미암아 승용차의 차체는 박판일체식 구조로 제작되어 구조적 강성의 약화를 가져 왔으며 이로 인하여 외부의 요인으로부터 발생되는 승용차의 진동문제는 더욱 악화되고 해결하기 어렵게 되어가고 있다. 이 논문에서는 이러한 여러가지 문제로 인하여 전륜구동형 승용차의 조향계에서 발생되는 Shake와 Shimmy를 2-모드 동흡진기를 사용하여 제어하고자 하며 실제적으로 시작품을 제작하여 실차상태에서 확인시험을 실시하였다.

• ICROS
• /
• v.21 no.1
• /
• pp.31-36
• /
• 2015

운전자에게 편의성을 제공하는 차량의 주행관련 Advanced driver assist system (ADAS)에는 차량의 종방향과 횡방향 운동에 대한 제어기가 요구된다. 횡방향 제어를 위해서는 조향 시스템의 조향각 제어가 요구되는데 최근 구조적으로 간단하고 연비향상, 차량의 중량 감소, 빠른 응답성을 가지고 있는 전기적 파워 조향 (Electric power steering, EPS) 시스템이 자동차 산업에서 널리 사용되고 있다. 차량의 주행관련 ADAS를 사용하여 자율 주행 시 EPS 시스템은 상위 제어기에서 계산된 필요한 조향각을 추종 할 수 있도록 조향 핸들의 각 제어를 해야 한다. 그러나 일반적인 EPS 시스템은 운전자가 조향 핸들에 인가된 토크를 보조해 줄 수 있는 토크를 출력해 준다. 본 논문에서는 이러한 문제를 해결하는 방법들을 설명한다. 먼저 EPS 시스템의 기본 기능에 대해서 설명을 하고, 자율 추행 차량을 위한 조항 핸들의 각 제어를 위한 proportional-integral 제어, 슬라이딩 모드 제어 (Sliding mode control), 관측기 기반 비선형 댐핑 제어(Observer based nonlinear damping control) 등과 같은 다양한 기법의 제어 알고리즘들에 대한 방법들이 고찰되었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.1141-1142
• /
• 2023

본 연구는 4륜 독립 구동·제동·조향 차량의 모드 천이 논리 알고리즘에 관한 연구로서, 일반적인 주행 스타일 외에도 다양한 주행 스타일을 가지는 차량에서 주행 모드 전환 간에 고려되어야 하는 조건들을 다룬다. 주행 모드 전환 간에 Static Transition과 Dynamic Transition이 가능하며 Static Transition 방식이 일반적이지만 저속 상태에서 차량이 충분히 정렬되어 있다면 FWS 주행, 동상 주행, 역상 주행 간의 Dynamic Transition도 가능할 것이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.7-14
• /
• 2007

In this paper, the scan characteristics of phased array antenna consisted of rectangular open-ended waveguide with a triangular grid are investigated. An infinite array structure is analyzed by numerically solving the integral equation for the electric field over the waveguide aperture using waveguide mode function and Floquet mode function. Next, SEP(Scan Element Pattern) and SI(Scan Impedance) characteristics are simulated by CST's MWS(Microwave Studio) and Ansoft's HFSS(High Frequency Structure Simulator) for the finite and infinite array structures. Also, validity of these approaches is verified by comparing the calculated and simulated results with the measured ones for an $8{\times}8$ subarray. Within 10.5 % fractional bandwidth in the X-band, the fabricated subarray showed the flat gain characteristic in the scan range of ${\pm}45^{\circ}C$ in the E-plane(azimuth) and ${\pm}20^{\circ}C$ in the H-plane(elevation), and also showed the return loss characteristic of less than -10 dB.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.580-586
• /
• 2023

AESA radar is able to instantaneously and adaptively position and control the beam, and this enables to greatly improve multi-target tracking capability with high accuracy in comparison to traditional mechanically-scanned radar system. This paper is primarily concerned with the development of an efficient methodology for multi-target managenent with the context of multi-target environment employing AESA radar. In this paper, targets are stratified into two principal categories: currently displayed targets and non-display targets, predicated upon their relative priority. Displayed targets are subsequently stratified into TOI (target of interest), HPT (high priority target), and SAT (situational awareness target), based on the requisite levels of tracking accuracy. It also suggests rules for determining target priority management, especially in air-to-air mode including interleaved mode. This proposed approach was tested and validated in a SIL (system integration lab) environment, applying it to AESA radars mounted on aircraft.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.13-20
• /
• 2023

This paper presents a fault tolerant control strategy for Steer-by-Wire (SbW) systems. Among many problems to be solved before commercialization of SbW systems, maintaining reliability and fault tolerance in such systems are the most pressing issues. In most previous studies, dual steering motors are used to achieve actuation redundancy. However, relatively few studies have been conducted to introduce fault tolerant control strategies using rear wheel steering system. In this work, an actuator fault in front wheel steering is compensated by active rear wheel steering. The proposed fault tolerant control algorithm consists of disturbance observer and sliding mode control. The fault tolerant control performance of the proposed approach is validated via computer simulation studies with Carsim vehicle dynamics software and MATLAB/Simulink.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.1145-1146
• /
• 2023

모빌리티 기술이 발전함에 따라 기존 차량에서 선보이지 못했던 다양한 주행기술이 가능해졌고, 이에 따라 많은 장점을 지닌 모빌리티 기술들이 등장하고 있다. 4 륜 독립 구동, 제동, 조향 시스템은 바퀴 별 독립 제어가 가능하여 여러 주행 모드를 구현할 수 있다. 본 연구에서는 4 륜 독립 구동, 제동과 독립 조향이 가능한 모빌리티 플랫폼에 대해 평행 주행, 제자리 회전, 축 회전 주행 등을 구현하는 방안과, 더 나아가 각도 속도를 일정하게 유지함으로써 오차를 최소화하는 제어 방법에 대해 살펴보고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.12
• /
• pp.997-1003
• /
• 2016

This paper presents an application of adaptive algorithms for yaw moment distribution with electronic stability control (ESC) and active rear steering (ARS) in integrated chassis control (ICC). Integrated chassis control consists of upper- and lower-level controllers. In the upper-level controller, the control yaw moment is computed with sliding mode control required to stabilize a vehicle. In the lower-level controller, adaptive algorithms are applied to determine the required brake pressure of ESC and the necessary steering angle of ARS, in order to generate the control yaw moment. Simulation is performed using the vehicle simulation package CarSim to validate the proposed method.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.546-551
• /
• 2023

In this study, a beam steering measurement system was developed to perform functions such as far-field beam steering and near-field beam focusing for TX/RX modes in the near file of the AESA radar. The beam steering measurement system consists of a spherical near-field scanner, an antenna positioner, a near-field controller, a network analyzer, a radar control system, a verification radar, a simulated radio, and an AESA radar. Using the developed system, the characteristics of TX/RX patterns before and after installation of radome to AESA radar were measured, and the beam pattern was analyzed through conversion to far field-after near-field measurement.The boresight error of the radar antenna device was measured, and it was confirmed that the main lobes were formed the same before and after the simulated radar dome was mounted.