• 제목/요약/키워드: 조크러셔

검색결과 3건 처리시간 0.016초

조크러셔 파쇄 간격 변화가 폐콘크리트로 제조된 잔골재의 특성에 미치는 영향 (Effect of Crushing Gap of the Jaw Crusher on the Properties of Fine Aggregates made with Waste Concrete)

  • 임군수;이준석;이동윤;김종;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 봄 학술논문 발표대회
    • /
    • pp.124-125
    • /
    • 2020
  • In this study, the characteristics of fine aggregates produced according to the jaw crush crushing gap variation were studied and analyzed in terms of recycled aggregates, and the experiments were conducted in terms of grading, density, water absorption, unit volume weight, grain shape. It was shown that the quality of the fine aggregate was affected by the shape of the morphological crushing.

  • PDF

조크러셔 파쇄간격이 고강도 폐콘크리트로 제조된 순환 잔골재의 품질에 미치는 영향 (Effect of Crushing Gap of Jaw Crusher on the Quality of Fine Aggregates Made with High-Strength Waste Concrete)

  • 임군수;이준석;이동윤;김종;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 봄 학술논문 발표대회
    • /
    • pp.60-61
    • /
    • 2020
  • In this study, the recycled fine aggregates produced from the waste concrete by using Jaw crusher depending on crushing gap of Jaw crusher were studied to offer a solution for recycled fine aggregate for concrete. The results of the experiment showed that the factors that influence grading and water absorption ratio, density and grain shape were significantly characterized by the generation of the particulate matter and the crushing shape of the aggregate.

  • PDF

NdFeB 자석 재활용을 위한 파분쇄 및 그에 따른 표면 산화 특성 연구 (Breakage and Surface Oxidation Characteristics of Waste NdFeB Magnet for Recycling)

  • 김관호;김가희;이훈;강정신
    • 자원리싸이클링
    • /
    • 제28권3호
    • /
    • pp.26-34
    • /
    • 2019
  • 희토류 영구자석(Rare earth magnet)은 사용량이 급격하게 증가하고 있으며, 이와 맞물려 폐희토류 자석의 발생량도 급격히 증가할 것으로 예측된다. 폐희토류 자석의 재활용은 주로 자석에 포함되어 있는 희토류 원소를 침출/분리하여 회수하는 공정으로 이루어지고 있으나, 침출 공정에 투입되는 폐희토류 자석의 분쇄 특성에 대한 연구는 전무한 실정이다. 따라서 본 연구에서는 폐희토류 자석을 이용하여 효과적인 파분쇄 공정 및 분쇄특성에 대한 연구를 진행하였다. NdFeB 폐자석을 조크러셔로 파쇄한 결과 급격한 산화 없이 효과적으로 입도가 감소는 하였지만, 롤크러셔의 경우 지속적인 압축에 의해 증가하는 표면과 대기 중의 산소가 반응하여 불꽃을 내며 급격한 산화가 발생하였다. 또한 파쇄 공정을 통해 생산된 시료를 볼밀에 투입하여 분쇄 특성을 파악한 결과, 일반적인 광물과 다르게 분쇄가 잘 이루어지지 않고 분쇄 16분 이후에 정상적인 분쇄가 이루어졌다. 또한 일반적인 광물에 비해 매우 낮은 분쇄율(S)과 미분이 발생이 매우 높은 분쇄분포(B)를 보임을 확인하였으며, 이는 향후 NdFeB 폐자석 파분쇄 공정 설계 시 기초자료로 사용될 수 있을 것으로 판단된다.