• Title/Summary/Keyword: 조정속도

Search Result 682, Processing Time 0.026 seconds

Thrust Performance Improvement through Position Signal Compensation and Estimation in Super Speed Maglev (위치신호 보상 및 추정을 통한 초고속 자기부상철도 추력 성능 향상)

  • Lee, Jin-Ho;Jo, Jeong-Min;Han, Young-Jae;Lee, Chang-Young
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.10
    • /
    • pp.4739-4746
    • /
    • 2013
  • In position detection for super speed maglev propulsion control, the influence of position signal delay and transmit cycle on propulsion power degradation is investigated analytically and validated by test bed experiments. As a solution to the problem caused by signal transmit, position signal compensation and estimation method is proposed and applied to the test bed. Through experiments, it is confirmed that by adapting the proposed method, the propulsion power is increased remarkably, which results in acceleration and velocity performance improvement. This method could be effectively applied to position detection system of Korean super speed maglev which is under development.

Highly Pure Culture of Photosynthetic Bacteria for Pilot-scale Production (광합성세균의 파이롯트 단위 생산을 위한 고순도 배양)

  • Cho, Kyoung Sook;Yim, Tae Bin;Jeong, Hae Yoon;Cho, Jeong Sub;Kim, Joong Kyun
    • Journal of Marine Bioscience and Biotechnology
    • /
    • v.1 no.4
    • /
    • pp.292-297
    • /
    • 2006
  • Lab-scale and pilot-scale productions of photosynthetic bacteria, that were able to efficiently treat wastewater from aquacultural farm, were experimented for their highly-pure culture. The results of experiments in a gas pack reactor, an anaerobic flask and a flask using $N_2$ gas as N-source showed that only photosynthetic bacteria formed red colonies on agar plate and their purity was over 90% in a colony, observed under a microscope. It was found that the basal medium could most promote the growth of photosynthetic bacteria, confirmed by experiments of serial cultures on various media. Under the culture conditions, the specific growth rate was found to be $0.18h^{-1}$ from the culture in 5L bioreactor and the same value could be obtained in pilot-scale production.

  • PDF

An Experimental Study on the Thermal Property of Concrete under the Load Ratio Condition in Fire (고온화재조건 콘크리트 라이닝의 하중비에 따른 폭렬영향성 및 화재손상특성에 관한 실험적 연구)

  • Kim, Hyung-Jun;Kim, Heung-Youl;Park, Kyung-Hun;Ahn, Chan-Sol;Kwon, Ki-Hyuk
    • Fire Science and Engineering
    • /
    • v.24 no.3
    • /
    • pp.145-151
    • /
    • 2010
  • The fire in tunnel, when failed to extinguish at early stage, tends to easily develop to high temperature and spread to entire area of the tunnel because of considerable level of fire load and smoke control facility within the tunnel, resulting in severe damage to the people and tunnel structure. This study was intended to carry out the fire test with MHC fire curve, a scenario, which has the most rapid fire rise, on assumption of load ratio of 1, 20, 40, 60 and 70%, so as to identify the thermal characteristics of the concrete against spalling and the range of fire damage. The specimen was small scale sample as defined by EFNARC and the mixing ratio was based on 24 MPa, which is considered to be the normal strength. As a result of test, 16mm spalling was occurred on the lining under the non-load condition, while no spalling was occurred with 20% and 40% of load ratio. In case of 60% of load ratio, 24 mm of spalling was occurred and it failed in 10 minutes after heating in case of 70% load condition.

Anti-browning Activities of Green Tea Water Extracts on Seasoned Squid (녹차 물추출물의 조미오징어 갈변억제 효과)

  • Yang, Seung-Yong;Kim, Dong-Su;Oh, Se-Wook;Bang, Hyun-A
    • Korean Journal of Food Science and Technology
    • /
    • v.31 no.2
    • /
    • pp.361-367
    • /
    • 1999
  • It was reported that green tea extract has antioxidant and antimicrobial activities. To improve the quality of seasoned squid, green tea water extract was sprayed on seasoned squid (water content 25%) and water content was adjusted to 27% and 29%. During storage at $30^{\circ}C$, TBA value, total plate count, browning were analyzed. Browning were analysed by 3 different method (absorbance of water solubilized color, 5% KOH-methanol solubilized color and color difference meter). Water and 5% KOH-methanol solubilized color showed good correlation, but color index detected by color difference meter was not. Green tea water extract slowed TBA value increment and reduced total plate count, so it was supposed that green tea water extract acts positively in manufacturing seasoned squid.

  • PDF

Optimal Power Allocation for Spatial Division Multiplexing Scheme at Relays in Multiuser Distributed Beamforming Networks (다중 사용자 분산 빔포밍 네트워크의 중계기에서의 공간 분할 다중화 기법을 위한 최적 전력 할당 방법)

  • Ahn, Dong-Gun;Seo, Bang-Won;Jeong, Cheol;Kim, Hyung-Myung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.4A
    • /
    • pp.360-370
    • /
    • 2010
  • In this paper, a distributed beamforming problem is considered in an amplify-and-forward (AF) wireless relay network consist of multiple source-destination pairs and relaying nodes. To exploit degree of freedom of the number of beamformers, in the first step, we proposed that the sources transmit their signals through orthogonal channels. During the second step, the relays transmit their received signals multiplied by complex weights to amplify and compensate for phase changes introduced by the backward channels through one common channel. The optimal beamforming vectors are obtained through minimization of the total relay transmit power while the signal-to-interference-plus-noise ratios (SINRs) at the destinations are above certain thresholds to meet a quality of services (QoSs) level. In the numerical example, it is shown that the proposed scheme needs less transmit power for moderate network data rates than other schemes, such as space division multiplexing or time-division multiplexing scheme.

A Study on the Preparation of UPE Resins with Different Glycol Molar Ratios and Their Physical Properties : 3. Estimation of Viscoelastic and Critical Surface Tension of UPE Liquid Resins (글리콜 몰비가 다른 불포화 폴리에스테르 수지의 제조 및 물성에 관한 연구 : 3. UPE 액상 수지의 임계표면장력 및 점탄성 평가)

  • 이상효;안승국;이장우
    • Polymer(Korea)
    • /
    • v.24 no.5
    • /
    • pp.589-598
    • /
    • 2000
  • In this study, various unsaturated polyester (UPE) resins were prepared from the condensation polymerization of mixtures of saturated (isophthalic acid : IPA) and unsaturated (maleic anhydride : MA) dibasic acids with propylene glycol (PG), neopentyl glycol (NPG). The critical surface tension (Υ$_{c}$) for the surface characteristics of a solid were estimated by Zisman plot, and the structure-property relationship was investigated by measuring the rheology of resins. The values of Υ$_{c}$ for glass of solid were 30.5 mNㆍm$^{-1}$ for UPE resin liquids. As the content of NPG in a PG/NPG glycol mixture increased, both the contact angle and the surface tension of the UPE resin liquids were found to decrease. The dynamic viscoelasticities of UPE resins with different glycol molar ratios were also measured. Shear rate dependence of viscosity and angular frequency dependence of storage, and loss modulus tended to decrease with increasing NPG content.

  • PDF

A Real-time Plane Estimation in Virtual Reality Using a RGB-D Camera in Indoors (RGB-D 카메라를 이용한 실시간 가상 현실 평면 추정)

  • Yi, Chuho;Cho, Jungwon
    • Journal of Digital Convergence
    • /
    • v.14 no.11
    • /
    • pp.319-324
    • /
    • 2016
  • In the case of robot and Argument Reality applications using a camera in environments, a technology to estimate planes is a very important technology. A RGB-D camera can get a three-dimensional measurement data even in a flat which has no information of the texture of the plane;, however, there is an enormous amount of computation in order to process the point-cloud data of the image. Furthermore, it could not know the number of planes that are currently observed as an advance, also, there is an additional operation required to estimate a three dimensional plane. In this paper, we proposed the real-time method that decides the number of planes automatically and estimates the three dimensional plane by using the continuous data of an RGB-D camera. As experimental results, the proposed method showed an improvement of approximately 22 times faster speed compared to processing the entire data.

한국의 경제성장에 대한 교육수준별 영향: 내생성장모형과 1975-2004년 동아시아 7개국 자료 분석

  • Jang, Chang-Won
    • Korea journal of population studies
    • /
    • v.30 no.1
    • /
    • pp.149-176
    • /
    • 2007
  • 본 연구는 지난 30년간(1975-2004년) 한국의 경제성장과정에서 교육의 부문별(초등 중등 고등교육) 역할을 추정하는 데 주목적이 있다. 본 연구는 우선 신고전학파 Solow의 외생적 경제성장이론을 접목한 Cobb-Douglas 모형을 확장하여 1인당 경제성장 추정을 위한 내생성장모형을 제시하였다. 또한 자료 한계를 극복하기 위하여 동아시아 7개국 자료를 바탕으로 시계 및 횡단면 자료를 블록으로 구축하여 앞의 내생성장모형을 이용한 pooling방법으로 1인당 경제성장에 물적자본, 단순노동력, 인적자본, 지적자본(R&D), 초기년도의 기술수준 등의 기여분을 추정하였다. 이러한 각 생산요소의 직접적인 추정결과로부터 각 요소간(고등교육, 중등교육, 지적자본) 상호작용으로 인한 간접적인 기여분 추정을 위해 연립방정식체계를 구축하고 각 요소의 영향력을 재 추정하여 보정된 결과를 제시하였다. 1975-2004년간 한국의 경제성장 과정에 있어서 인적자본요소인 교육은 40.7%를 기여였으며 이를 다시 분해하면 중등교육이 가장 큰 87.0%, 초등교육이 6.6%, 중등교육에 간접적으로 기여한 대학교육이 -52.9%를 보였다. 물적자본이 39.6%, R&D자본이 24.1%들 보였으며 지식 정보기반사회에서 그 의미가 감소한 단순노동력은 -1.4%, 기술추격을 가능케 하는 1975년도 초기기술수준이 -3.0%의 추정결과를 보여주고 있다. 향후 정책연구 과제로는 한국미 지식기반사회에서 선진국으로 진입하기 위해서는 경제성장과정에서 대학의 역할을 제고할 필요성이 있음을 제안하고 있다. 이를 위해서는 기존 대학의 양적인 구조조정이 필요하다. 특히 대학의 질적 경쟁력을 높이기 위한 정부의 대학 지원 역할 역시 제고되어야 할 것이다. 또한 이 글은 교육시장과 노동시장을 어떠한 방법으로 연계 시키는가를 논의하고 세계시장의 급격한 기술변화와 체제변화에 따라 국내노동시장의 필요한 산업인력수요의 내용도 같은 속도의 변화를 요구하고 있음을 상기시키고 연계지원 정책을 주장하고 있다.

Design Considerations on Large-scale Parallel Finite Element Code in Shared Memory Architecture with Multi-Core CPU (멀티코어 CPU를 갖는 공유 메모리 구조의 대규모 병렬 유한요소 코드에 대한 설계 고려 사항)

  • Cho, Jeong-Rae;Cho, Keunhee
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.30 no.2
    • /
    • pp.127-135
    • /
    • 2017
  • The computing environment has changed rapidly to enable large-scale finite element models to be analyzed at the PC or workstation level, such as multi-core CPU, optimal math kernel library implementing BLAS and LAPACK, and popularization of direct sparse solvers. In this paper, the design considerations on a parallel finite element code for shared memory based multi-core CPU system are proposed; (1) the use of optimized numerical libraries, (2) the use of latest direct sparse solvers, (3) parallelism using OpenMP for computing element stiffness matrices, and (4) assembly techniques using triplets, which is a type of sparse matrix storage. In addition, the parallelization effect is examined on the time-consuming works through a large scale finite element model.

Adjusting Local Network Speed by Using Fuzzy Theory with An Illustration in WebRTC Environment (퍼지이론과 예증을 이용한 WebRTC환경의 로컬 네트워크 속도 조정)

  • Van, Linh Ma;Jang, Jong-hyun;Kim, Jinsul
    • Journal of Digital Contents Society
    • /
    • v.16 no.6
    • /
    • pp.917-925
    • /
    • 2015
  • WebRTC is one of the most recent technologies that supports browser-to-browser for voice calling, video chat, and P2P file sharing without the need of either internal or external plugins. However, there has some limitation which lets our development deal with many problems. This research will focus just on a small field of that problem which is bandwidth. While the bandwidth for downloading and uploading is fixed by service providers, but the number of users in a certain area is increasing largely by the time. In this paper, we propose a model to overcome the limitation of the bandwidth based on fuzzy control to adjust utilized bandwidth by changing frame rate and resolution of streaming video in the client itself.