• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.1
• /
• pp.56-63
• /
• 2003

This paper studies that torque model considered with decaying phase back-EMF is different In conduction and commutation period and analyzes the torque pulsation components mathematically. In this paper, it is proposed a novel method to suppress torque pulsation due to commutation time. First, it propose commutation delay time control method, which is to compensate current slope of rising phase and decaying phase to control commutation time. Current ripple is minimized at non-commutating current and torque ripple is reduced below critical speed range that dc link voltage is the same as four times of back-EMF voltage. However, torque ripple still exists due to the relation with back-EMF and commutating current and it is increased on a large scale above critical speed range, especially. Secondly, proposed method is commutation time control, which is considered with torque pulsation due to the relation of back-EMF and commutating current. Through the proposed method, the torque pulsation can be minimized in the whole speed range as well as range over critical speed.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.36-45
• /
• 1998

In this paper, a method of on-line PI gain-tuninng is proposed for the speed control of brushless D.C. motor by investigating the pattern of input and output without estimating parameter. Proportional gain is tuned in the process to obtain a fast speed response by supplying the maximum constant input. And integral gain is appropriately tuned in the process of proportional control so that the response may be stably converged and the overshoot may be prevented. Therefore because both control and gain-tuning are executed concurrently, additional works that estimate parameters and so on aren't required in the proposed method. In the proposed method, both fast-response and overshoot problem are well solved, and it is more useful and convenient than existing auto-tuning methods in the speed control of D.C. motor. It is illustrated by simulations and experimental results that the proposed method is useful and stable.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.919-928
• /
• 2010

Four patterns for width adjustment were studied with an aim to increase the width-adjustment speed in continuous casting. The main goals are to minimize the actuating force of a WAM actuator, to develop a deformation analysis model of a solidified shell in the mold, and to induce the main limit factor for the speedup of width adjustment. On the basis of the width-adjustment experiment, the notable features of four patterns types were considered, and we compared the corresponding actuating forces. For comparing the driving forces of the patterns, during the experiment, the same casting speed was maintained for each pattern. To optimize the parameter of the deformation analysis model of the solidified shell, the experiment results were applied to them. To speed up width adjustment and to reduce the driving force, we controlled the pattern parameters. The most effective pattern was the fast-mode pattern, and the taper was the main parameter that helped reduce the driving forces during the motion of the actuator.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.303-310
• /
• 2009

We processed seven years data of 142 IGS(International GNSS Service) stations were processed, which have been selected with an optimal network algorithm, to realize terrestrial reference system. To verify the result, a comparison with the ITRF2005 was given both in positions and velocities with transformation parameters estimation. The transformation parameters are within 4.3 mm in length, while the RMS(root mean square) difference of positions and velocities are 6.7 mm and 1.3 mm/yr in horizontal and 13.3 mm and 2.4 mm/yr in vertical, respectively, which represent good coincidences with ITRF2005. This research would help developing our own geodetic reference frame and may be applied for the global earth observations such as the global tectonics. A further improved TRF would be expected by applying various data processing strategies and with extension of data in number and observation period.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.66-77
• /
• 2014

UTIS(Urban Traffic Information System) directly collects link travel time in urban area by using probe vehicles. Therefore it can estimate more accurate link travel speed compared to other traffic detection systems. However, UTIS includes some missing data caused by the lack of probe vehicles and RSEs on road network, system failures, and other factors. In this study, we suggest a new model, based on k-NN algorithm, for imputing missing data to provide more accurate travel time information. New imputation model is an adaptive k-NN which can flexibly adjust the number of nearest neighbors(NN) depending on the distribution of candidate objects. The evaluation result indicates that the new model successfully imputed missing speed data and significantly reduced the imputation error as compared with other models(ARIMA and etc). We have a plan to use the new imputation model improving traffic information service by applying UTIS Central Traffic Information Center.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1759-1769
• /
• 1997

The Error BackPropagation (EBP) algorithm for multi-layered neural networks is widely used in various areas such as associative memory, speech recognition, pattern recognition and robotics, etc. Nevertheless, many researchers have continuously published papers about improvements over the original EBP algorithm. The main reason for this research activity is that EBP is exceeding slow when the number of neurons and the size of training set is large. In this study, we developed new learning speed acceleration methods using variable learning rate, variable momentum rate and variable slope for the sigmoid function. During the learning process, these parameters should be adjusted continuously according to the total error of network, and it has been shown that these methods significantly reduced learning time over the original EBP. In order to show the efficiency of the proposed methods, first we have used binary data which are made by random number generator and showed the vast improvements in terms of epoch. Also, we have applied our methods to the binary-valued Monk's data, 4, 5, 6, 7-bit parity checker and real-valued Iris data which are famous benchmark training sets for machine learning.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.63-77
• /
• 2023

This study applies reinforcement learning to effectively operate expressway hard shoulder running (HSR). An HSR algorithm was developed, and its effectiveness was evaluated using the VISSIM microscopic simulation program. The simulation evaluated two aspects: mobility and safety. The DQN-based HSR algorithm found speed improvement of up to 26 km/h. Compared to the current method, the difference in the number of conflicts was not significant. Considering the results, a DQN-based HSR operation has a clear effect, and it is necessary to consider adjusting the current operational criteria.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.5 no.1
• /
• pp.33-42
• /
• 1997

It is not long since treatment of food waste became a social problem. However, it is a fact that there have been a lot of debates on the treatment of food waste since several years ago. At present, two ways of disposing food waste are under great interest in Korea and Japan. One is drying of food waste at high temperature. The other is disappearance type, in which analysis by microorganism takes place with continuous supply of a bulking agent for a certain period of time that was stored in a reactor. In our laboratory, Disappearance type Food Waste Disposer is under interest, and experiments regarding condition establishment for efficient analysis of food waste were conducted. As preceding experimentation, experiments were done with regard to the selection of a substance to be used as a bulking agent, improvement by addition of a substance which maximizes initial growth of microorganism, and a concentration change in rank odors generated by reaction with deodorizer (absorbent). The results turned out to be satisfactory.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.247-254
• /
• 2010

In this paper, a new approach has been studied correcting the geometric distortion of SPOT 4 imagery. Two new equations were induced by the relationship between satellite and the Earth in the space. line-of-sight (LOS) vector adjustment model for SPOT 4 imagery was implemented in this study. This model is to adjust LOS vector under the assumption that the orbital information of satellite provided by receiving station is uncertain and this uncertainty makes a constant error over the image. This model is verified using SPOT 4 satellite image with high look angle and thirty five ground points, which include 10 GCPs(Ground Control Points) and 25 check points, measured by the GPS. In total thirty five points, the geometry of satellite image calculated by given satellite information(such as satellite position, velocity, attitude and look angles, etc) from SPOT 4 satellite image was distorted with a constant error. Through out the study, it was confirmed that the LOS vector adjustment model was able to be applied to SPOT4 satellite image. Using this model, RMSEs (Root Mean Square Errors) of twenty five check points taken by increasing the number of GCPs from two to ten were less than one pixel. As a result, LOS vector adjustment model could efficiently correct the geometry of SPOT4 images with only two GCPs. This method also is expected to get good results for the different satellite images that are similar to the geometry of SPOT images.

• Journal of the Korean Geophysical Society
• /
• v.3 no.3
• /
• pp.153-160
• /
• 2000

Crustal velocities around the Korea peninsula are estimated and investigated from eight IGS permanent stations in eastern Asia area. GPS data for the period of May 1995 to December 1991 were analyzed to estimate daily coordinates of each site relative to TAEJ site. The velocity vector of each site is estimated from linear regression analysis with time series of coordinates. As the result, horizontal velocity components for four stations(Tsukuba, Usuda,Taiwan and Shanghai) using thirty-two months data were estimated with the standard error less than 1 mm/year. Our GPS velocity of six sites on the interiors of the Eurasia plate are similar within 1 cm/year with small differences respectively. On the other hand, the velocities of Tsukuba and Usuda showed the great differences from the other six sites. This can be explained by the fact that these two sites are enforced by the surrounding four plates, such as the Pacific, Eurasia, North America and Philipine plate. This study showed that the distance between Korea and Japan is shortened with the rate of 3 cm per year.