• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.117-124
• /
• 2017

A Smart Grid is a system that can efficiently use energy by exchanging real-time information in both directions between a consumer and a power supplier using ICT technology on an existing power network. DR(Demand response) is an arrangement in which electricity users can sell the electricity they save to the electricity market when the price of electricity is high or the power system is crisis. In this study, we developed a power meter data transmission device and power IT system that measure the demand information in real-time using a smart meter and transmit it to a cloud server. The power meter data transmission device developed in this study uses alight sensor connected to a Raspberry Pi 3 to measure the number of blinking lamps on the KEPCO meter per unit of power, in order to provide reliable data without any measurement errors with respect to the KEPCO power data. The power measurement data transmission device uses the standard communication protocol, OpenADR 2.0b. The measured data is transmitted to the power IT system, which consists of the VEN, VTN, and calculation program, via the LTE WiFi communication network and stored in its MySQL DB. The developed power measurement data transmission device issues a power supply instruction and performs a peak reduction DR when a power system crisis occurs. The developed power meter data transmission device has the advantage of allowing the user to adjust it every 1 minute, where as the existing smart metering time is fixed at once every 15 minutes.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.1018-1027
• /
• 2019

Natural-derived protein-derived low molecular weight peptides have been known to have physiological activities such as antioxidant, hypertension relief, immunomodulation, pain relief and antimicrobial activity. In this study, the low-molecular peptides were produced using commercial proteases (alcalase, bromelain, flavourzyme, neutrase, papain, protamex), and the antioxidant activity (DPPH scavenging activity, superoxide radical scavenging activity, hydroxy radical scavenging activity, and metals chelation capacity), constituent amino acid and molecular weight of the peptide were analyzed. Enzyme reaction was performed by adding 50 g of chopped Ogae meat slurry and 2%(w/v) protein enzyme into the enzyme reactor for 2 h at a pH of 6 and a temperature of $60^{\circ}C$. The degree of hydrolysis(%) after the reaction ranged from $36.65{\pm}4.10%$ to $70.75{\pm}5.29%$. The highest degree of hydrolysis of protamex was 46.3%, and the highest value of papain hydrolysate was $70.75{\pm}5.29%$. On the other hand, alcalase hydrolysate showed the lowest value of $36.65{\pm}4.10%$. Bromelain-treated low molecular weight peptides showed the highest DPPH radical scavenging activity and the lowest scavenging activity of alcalase-treated peptides. Superoxide radical scavenging activity showed that bromelain treated low molecular peptide showed the highest radical scavenging activity of 50% or more. Hydroxyl radical scavenging activity ranged from about 16.73 to 69.16%, the highest among bromelain-treated low molecular peptides. $Fe^{2+}$ chelation abilities showed a distribution between about 17.85 to 47.84%. The chelation capacity of the hydrolysates was not significantly different without any difference to the enzymes used. The results of amino acid analysis showed differences between hydrolysates of alcalase, bromelain, flavourzyme, neutrase, papain, and protamex enzymes. The most amino acid was glutamic acid. The molecular weight distribution of the enzyme hydrolyzates was in the range of 300-2,000 Da, although the molecular weight distribution differed according to the treated enzymes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.108.1-108.1
• /
• 2010

분류층 가스화기는 석탄과 산소(공기) 및 수증기가 반응하여 $1200{\sim}1600^{\circ}C$의 고온, 20~60기압의 고압에서 작동되어 합성가스를 생성하며 합성가스에 포함된 입자 및 황화합물 등을 정제설비를 통하여 정제 후 발전 및 화학원료로 사용한다. 석탄가스화 중 석탄에 포함된 대부분의 회분은 용융슬래그 형태로 가스화기 벽면을 따라 흘러 내려 가스화기 하부의 냉각수조에서 급랭되어 배출된다. 이때 용융슬래그의 원활한 배출을 위해서는 일정범위의 점도를 유지하는 것이 필요하다. 슬래그의 점도는 가스화기 온도 및 Ash의 조성에 따라 크게 변하며 가스화기 설계 및 운전 시 매우 중요한 변수이다. 따라서 최적의 설계 및 운전을 위해서는 Ash의 점도예측이 중요하며, 분류층 가스화기내부에서 Ash 점도 예측을 위한 DooVisco 프로그램을 개발하였다. DooVisco는 가스화기 내부에서 슬래그 용융온도 및 온도별 점도, 가스화기 최소 운전온도 및 석회석 투입 효과 분석뿐만 아니라 석탄의 혼합 사용 시의 특성 예측도 가능하도록 개발되었다. DooVisco는 슬래그 주요 4성분인 SiO2, Al2O3, CaO, FeO 성분에 대한 Phase Diagram을 이용하여 1차적으로 슬래그용융온도(Liquidus Temperature)를 예측하고, 주요 4 성분 외에 Na2O, MgO, K2O, TiO2 등을 고려한 Kalmanovich Model을 이용하여 점도를 예측한다. 최종적으로 슬래그 용융온도와 점도를 활용하여 분류층 가스화기 운전가능 온도범위를 예측한다. 개발된 DooVisco를 활용하여 300MW급 실증 IGCC 플랜트에 사용가능성이 있는 석탄을 대상으로 슬래그의 용융온도 및 점도 등을 예측하였으며 최적 운전을 위한 슬form점도 조절용 Flux인 석회석 투입량 등을 평가하였다. 평가 결과 슬래그 용융온도가 $1700^{\circ}C$ 이상으로 석회석 투입이 필요하다고 판단되었다. 약 가스화기 내부 온도를 $1500^{\circ}C$ 정도에서 원활한 운전을 위해서는 석탄 대비 약 10% 내외의 석회석 투입이 필요할 것으로 평가되었다. DooVisco는 분류층 가스화기 설 계시 가스화기 최적 운전 온도 설정 및 Flux 투입필요성, 종류, 투입량 선정에 활용될 수 있을 뿐만 아니라 플랜트 운전시 석탄의 탄종 적합성 등을 판단하는데 활용될 수 있을 것이라 판단된다.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.307-315
• /
• 2002

Major factors affecting the impact resistance of high impact polystyrene (HIPS), the rubber-toughened grade of polystyrene, are rubber-phase particle size and size distribution, molecular weight, morphology, and degree of grafting. Accordingly, it is important to control or investigate these factors. In this study, the effect of solvent content was analyzed by the morphology and particle size distribution of rubber phase, and final properties in bulk-solution polymerization of HIPS. The prepolymerization time was, first, determined by measuring the evolution of particle size distribution of dispersed phase to explain the phase inversion with time. As the solvent content increased, the size of rubber particle increased and then gradually decreased. Rubber-phase morphology was likely to have higher degree of grafting as the solvent content increased. Rheological and mechanical properties decreased as the solvent content increased because of the decrease of matrix molecular weight due to the chain transfer reaction to solvent and the existence of residual solvent. Nevertheless, the impact resistance seemed to increase when the rubber particle size increased.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.313-313
• /
• 1994

대상환자는 40예중 37예에서 평가가 가능하였고 남녀비는 11:26. 중앙연령 42세 이었으며 대상질환은 위선암 12에, 유방암 10예. 골옥종 5예등 이었다. rhGM-CSF에 의한 부작용은 150.250 $\mu\textrm{g}$/$m^2$/d 용량군에서는 Grade I-II의 전신쇠약감, 근육통.심계항진등이 관찰되었으나 특별한 조치없이 회복되었다. 350$\mu\textrm{g}$/$m^2$/d 용량군에서는 8예에서 WHO grade II-III의 전신쇠약, 전신열감, 흉부압박감, 호흡곤란 등을 호소하였고 1예에서 투여 1일러 WHO gradeIII의 피부반응이 나타났으며, 이 중 2예에서는 rhGM-CSF를 250 $\mu\textrm{g}$/$m^2$/d로 감량투여후 상시 증상이 소실되었다. rhGM-CSF 투여전의 대조기와 투여기의 혈액학적 소견 비교시. 평균 중성구 최저치는 세 용량군에서 모두 관찰기에 비해 시험기어서 증가하였고. 평균 총 백혈군 최저치는 150.350 $\mu\textrm{g}$/$m^2$/d 용량군은 차이가 있었고 250 $\mu\textrm{g}$/$m^2$/d 용량군은 차이가 있었으나 통계적 유의성은 없었다. 비혈구치가 최저치에서 4.000/㎣ 이상으로 회복되는 평균일수와 호중구치가 최저치에서 2.000/㎣ 이상으로 회복되는 평균일수는 세 용량군 모두에서 관찰기어 비해 시험기에서 증가하였다. 고용량 항암약물요법후 중성구 감소에 의한 발열은 rhGM-CSF 비투여기에서 18예. rhGM-CSF 투여기에서 8예 관찰되었다고 발열기간은 각각 5-7일. 2-3일 이었다. 임상 양상은 세 용량군 간 차이가 없었으나, 시험기에서 발열의 발현율이 낮았으며, 발열일 수와 항생제 사용일 수가 짧았다. 결론: 골수억제 조절 효과는 용량에 따른 혈액소견에 미치는 영향, 부작용, 감염의 빈도, 감염발생에 따른 항생제 사용기간 등을 고려하여 그 임상 유효성 평가시, 제 3상 시험에 사용할 권장량 (recommended dose) 은 250 ug/$m^2$/d $\times$ 10d 으로 관찰되었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.1
• /
• pp.115-125
• /
• 1993

In Euglena gracilis arginine deiminase was located in the mitochondrial matrix. The highly purified enzyme required $Co^{2+}$ for the enzyme reaction with the $K_m$ value of 0.23 nM, and its optimum pH was 9.7 to 10.3. The molecular weight of the native enzyme protein was 87,000 by gel filtration, and SDS-acrylamide gel electrophoresis showed that the enzyme consisted of two identical subunits with a molecular weight of 48,000. Euglena arginine deiminase was inhibited by sulfhydryl inhibitors, indicating that a sulfhydryl group is involved in the active center of the enzyme. It exhibited negative cooperativity in binding with arginine. $L-{\alpha}-amino-{\beta}-guanidino-propionate$, D-arginine, and L-homoarginine strongly inhibited the enzyme while ${\beta}-guanidinopro-pionate$, ${\gamma}-guanidinobutyrate$, and guanidinosuccinate did not. Considerable inhibition was also observed with citrulline and ornithine. We discuss the effects of the unique properties of the Euglena arginine deiminase on the regulation of arginine metabolism in this protozoon.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.125.1-125
• /
• 2003

호박은 다른 과채류에 비해 기후조건에 대한 적용범위가 넓고, 한국의 기후 풍토하에서 잠재생산 가능성이 대단히 높은 작목의 하나로 간주되고 있으며, 다른 박과 채소보다 병이 심하지 않고 약재를 살포할 필요가 거의 없으므로 무공해 식품으로도 그 가치가 높은 것으로 평가되고 있다. 최근 국민 식생활 패턴이 고급화 됨에 따라 건강을 중요시하는 소비자가 급증하면서 약품이 아닌 식품으로 인체의 조절기능에 초점이 맞춘 다양한 기능성 식품이 생산되고 있는 실정이며, 이 중 녹황색 채소류의 항산화, 항암효과가 알려지고 있어 늙은 호박을 이용한 새로운 형태의 가공제품은 향후 소비자의 구매욕구를 충동하기에 충분할 것으로 판단된다. 따라서 이러한 호박을 이용하여 가공제품을 생산하기 위한 기초자료로서 추출조건에 따른 품질변화를 모니터링하고자 하였다. 호박의 전처리의 경우 박피유무에 큰 차이가 없으므로 공정단계를 최소화하기 위해 박피를 하지 않고 사용하였으며, 파쇄의 형태는 깍둑썰기(4$\times$4$\times$4㎤)를 하여 추출조건에 사용하였다. 추출온도의 경우 호박자체의 색을 유지하는데 효율적인 95$^{\circ}C$에서 행하였다. 시료에 대한 용매비 및 추출시간에 따른 품질의 변화가 많으므로 시료에 대한 용매비(10, 20, 30, 40 50g/100$m\ell$) 및 추출시간(1, 2, 3, 4, 5 hr)에 따른 중심합성실험계획으로 추출하였다. 추출조건에 따른 추출물에 대하여 수율, 당도, 갈색도 및 탁도를 측정하여 시료에 대한 용매비 및 추출시간에 따른 반응표면분석을 실시하였다. 영향도를 분석한 결과 수율은 추출시간에 영향을 많이 받는 것으로 나타났으며, 총당 및 갈색도는 시료에 대한 용매비에 영향을 많이 받으며 탁도의 경우 두 조건 모두에 영향을 받은 것으로 나타났다. 수율에 대한 최적 추출조건은 호박량 10.03% 및 추출시간 2.89hr일 때 가장 높은 수율로 예측이 되었으며, 갈색도의 경우 호박량 15.21% 및 추출시간 1.65hr에서 최소로 나타났다.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.300-306
• /
• 2007

This study was carried out to analyze the characteristics of forest environmental and stream morphological factors by using the quantification theory (I) for prediction of the suitable dam site. The results obtained from this study were summarized as follows; The selection of suitable site for erosion control dam was estimated by normalized score of each category. And the prediction method of suitable site for erosion control dam divided into class I (Very suitable site), II (Suitable site), and III (Poor suitable site) for the convenience of use. In conclusion, if we select the suitable site for construction of erosion control dam for disaster prevention, we could save the loss of tremendous budget, avoid the poor suitable site due to subjective judgment, and it would promote the functions of erosion control dam.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.344-349
• /
• 2007

NaY zeolites synthesized by microwave heating were compared with those obtained by conventional heating. When the same temperature increasing rates were adopted in both heating methods, the microwave heating shortened the induction period and enhanced the rate of crystallization of NaY zeolites compared with the conventional heating. Irrespective of microwave radiation, the fast temperature increasing rate also shortened the induction time and enhanced the crystallization of NaY zeolites. The crystal sizes of NaY zeolites were large under the fast temperature raise of the reaction mixture and became larger by microwave radiation. At the same time, the fast temperature increasing rate has reduced the energy consumption due to the fast completion of reaction during the synthesis of NaY zeolite. The energy consumption in the conventional ethylene glycol bath was lower than that in the microwave oven with the same temperature increasing rate in this study, which means that the energy efficiency is not always high in microwave heating. If the temperature increasing rate is carefully controlled, however, NaY zeolite can be produced with high energy efficiency in the microwave oven.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.960-965
• /
• 1995

Hard Ti(C, N) layers of various compositions were coated on ASP30 tool steel employing a reactive HCD ion plating technique. The effect of film composition on the wear characteristics were investigated in lights of hardness, adhesion and wear mechanism. With an increase in the amount of nonmetallic component(N, C), the hardness of films increased, but the increase in carbon content resulted in poor adhesion. Within the concentration range of ([C+N]/Ti<1), these trends became mute clear than in the concentration below stoichiometry. Therefore, the wear resistance could be maximized when the film is deposited with the concentration of ([C+N]/Ti<1) for high microhardness and, at the same time, with the low carbon contents not to wear out in adhesive mode.