• Title/Summary/Keyword: 조수조건

Search Result 122, Processing Time 0.028 seconds

A Study on Wholesale Terms, Procedures, Methods in OECD Countries (OECD 주요국의 도매제공 조건.절차.방법 관련 사례)

  • Kim, B.W.;Cho, S.M;Shin, H.M.
    • Electronics and Telecommunications Trends
    • /
    • v.24 no.2
    • /
    • pp.97-110
    • /
    • 2009
  • 규제당국은 설비를 보유하고 있지 않는 다양한 형태의 사업자들의 서비스 시장 진입장벽을 낮추기 위한 제도적 장치로서 전기통신사업 법 개정을 통하여 공정경쟁과 이용자보호를 위한 도매규제방안을 강구하고 있다. OECD 국가들은 도매제공 도입 등으로 인해 고용증대효과, 요금인하효과가 발생하였다. 특히, 도매제공 및 요금규제를 하고 있는 노르딕 국가들은 OECD 전체 회원국 중 가장 낮은 이동전화 요금수준을 유지하고 있다. 국내의 경우 해외와 같이 도매제공(무선재판매) 의무화를 위해서는 먼저 현행 법규정에 무선재판매 의무제공에 대한 근거를 마련해야 한다.

지하수의 채취 및 전처리 방법에 따른 TOC 농도변화

  • 조수영;윤윤열;이길용;김용재
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2004.09a
    • /
    • pp.413-416
    • /
    • 2004
  • TOC(total organic carbon)분석은 폐수 및 강수의 오염특성을 평가하기 위한 도구로서 BOD(biochemical oxygen demand), COD(chemical oxygen demand) 와 함께 사용되어 왔다. TOC 측정시간은 10분 정도로 BOD(5~6일), COD(2~3시간)에 비해 아주 짧은 시간에 측정할 수가 있으며, 전처리과정이 단순하고 정확도도 높은 것으로 알려져 있다. 본 연구는 지하수의 잠재오염성을 밝혀내기 위한 도구로 TOC를 활용하여 신뢰성 있는 분석 값을 얻기 위해서 시료의 채취, 보관, 측정까지의 최적 조건을 도출하는데 목적을 두었다. 아울러 시료 채취 후 일정 경과 시간에 따른 TOC의 변화를 관찰하였다. 시료채취 용기, 채취 후 산성화, 보관방법 및 기간에 대한 실험 결과, 대상 변수에 따라서 TOC의 농도변화에 커다란 차이점을 볼 수 있었다. TOC 농도가 낮은 지하수시료의 측정에서는 빛을 차단시킨 불투명 유리병을 사용해야만 하고 채취 즉시 산도를 높여(pH<2)주며 4$^{\circ}C$ 이하에서 보관하여야 한다. 지하수중 TOC 측정시료는 가능한 보관 기간에 있어서 채수 후 24시간 이내에 측정하는 것이 좋으나 1) 본 연구에서는 채취현장과의 거리를 고려하면 현실적으로 불가능하므로 기간에 따른 TOC 변화를 30일까지 측정, 조사하였다.

  • PDF

용매추출법을 이용한 지하수중의 Polonium 측정

  • Jo Su-Yeong;Lee Gil-Yong;Yun Yun-Yeol;Kim Yong-Je
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2005.04a
    • /
    • pp.359-362
    • /
    • 2005
  • 알파전용 액체섬광기를 이용하여 지하수내 Polonium을 간편하고 신속하게 측정하는 방법을 연구하였다. 추출섬광용액으로 HDEHP, TNOA, TOPO 또는 NDA 등을 사용하지만 본 실험에서는 POREX(77g TOPO, 180g Naphthalene, 4.0g PBBO/1L Toluene)를 사용하였다. 지하수의 액상을 $1M\;H_2SO_4-0.01M\;NaCl$로 맞추어주고 0.012M POREX를 추출액으로 사용하여, 분리 추출하므로써 실험의 추출효율 및 재현성을 조사하였다. 위 조건에서의 Polonium 분배계수는 $10^4$ 이상으로 알려져 있다. 표준물질인 Po-209(NIST SRM 4326)를 Po의 측정효율 및 추출효율을 조사하는데 이용하였다. 실제 지하수에 위 실험방법을 적용하여 지하수의 Polonium을 측정하였다.

  • PDF

개인용 전산기를 이용한 반복이차계획법의 수치성능개선

  • 임오강;이병우;조수익
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.14 no.4
    • /
    • pp.857-865
    • /
    • 1990
  • 본 연구에서는 공학의 최적화문제 해석에서 우수한 성능을 보인 반복 이차 계 획법(recursive quadratic programming)을 개인용 전산기에 맞도록 개발하였다. Wilson이 제안한 RQP 알고리즘은 뉴톤 방법의 일종으로 실용화 단계에서 많은 수정 보 완이 되었다. 동류의 알고리즘 중 활성화 제약 조건 방책을 제안한 Pshenichny의 선 형화 기법이 공학의 최적화문제에 사용되어 좋은 결과를 얻어, 이 알고리즘의 수치적 성능을 높이기 위한 노력이 계속되었다.그러나 이 알고리즘은 사용되는 매개 변수 들에 따라 수치적 성능이 달라 진다. 따라서 대형전산기에서만 수행된 매개변수들의 변화에 따른 수치성능을 개인용 전산기에서 수행하여 성능을 검토하며 적절한 정보를 제시하고, 이를 대형 전산기에서의 결과와 비교하였다.

Evaluation for Determination of Optimum Size in Drainage Lock Gate (배수갑문 최적 규모 결정 검토)

  • Oh, Ji-Eun;Lee, Tae-Woo;Jung, Tae-Hwa;Lee, Jong-Seok
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.855-859
    • /
    • 2010
  • 우리나라는 국토면적이 작고 인구밀도가 높기 때문에 간척지를 조성해 농경지 및 대규모 공단으로 개발하여 사용하고 있다. 특히 서해안 지역은 조수간만의 차가 크지만 지형학적으로 간척지 개발의 적지가 많아 현재까지 방조제 설치가 가장 많이 이루어지고 있다. 그러나 방조제 설치 후, 호내 매립은 홍수위 및 홍수유출량의 급변으로 인해 외수위 변화에 따른 유출 배제 가능량을 재산정하여야 한다. 본 연구에서는 설계 홍수량, 시간별 외조위조건 그리고 유수지용량 등의 분석을 통하여 유역에서 홍수 발생 시 즉각적으로 대처할 수 있는 홍수배제용 배수갑문의 최적 규모를 결정하는 것이 목적이다.

  • PDF

Analysis of Electrical Properties for Optimal Operating Conditions of Mono-crystalline Si Solar Cell (단결정 실리콘 태양전지 최적 운전조건을 위한 전기적 특성 분석)

  • Kim, Ji-Woong;Choi, Yong-Sung;Lee, Kyung-Sup;Cho, Soo-Young;Hwang, Jong-Sun
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.24 no.8
    • /
    • pp.654-658
    • /
    • 2011
  • This paper was investigated the electrical properties for optimal operating conditions of monocrystalline silicon solar cell. The output of electricity for monocrystalline solar cell was investigated according to the distances between solar cell and halogen lamp and to the resistances by the variable resistor.

An Efficient Constraint Boundary Sampling Method for Sequential RBDO Using Kriging Surrogate Model (크리깅 대체모델을 이용한 순차적 신뢰성기반 최적설계를 위한 효율적인 제한조건경계 샘플링 기법)

  • Kim, Jihoon;Jang, Junyong;Kim, Shinyu;Lee, Tae Hee;Cho, Su-gil;Kim, Hyung Woo;Hong, Sup
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.40 no.6
    • /
    • pp.587-593
    • /
    • 2016
  • Reliability-based design optimization (RBDO) requires a high computational cost owing to its reliability analysis. A surrogate model is introduced to reduce the computational cost in RBDO. The accuracy of the reliability depends on the accuracy of the surrogate model of constraint boundaries in the surrogated-model-based RBDO. In earlier researches, constraint boundary sampling (CBS) was proposed to approximate accurately the boundaries of constraints by locating sample points on the boundaries of constraints. However, because CBS uses sample points on all constraint boundaries, it creates superfluous sample points. In this paper, efficient constraint boundary sampling (ECBS) is proposed to enhance the efficiency of CBS. ECBS uses the statistical information of a kriging surrogate model to locate sample points on or near the RBDO solution. The efficiency of ECBS is verified by mathematical examples.

Sidewalls Design for a Double-Passage Cascade Model (2피치 유로의 캐스케이드 모델을 위한 벽면설계에 관한 연구)

  • Cho, Chong-Hyun;Cho, Bong-Soo;Kim, Chae-Sil;Cho, Soo-Yong
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.36 no.8
    • /
    • pp.797-806
    • /
    • 2008
  • In a double-passage cascade apparatus, only two blades are installed in order to increase the accuracy of experimental result by applying bigger blade than the size of multi-blades on the same apparatus. However, this causes difficulties to make correct periodic condition. In this study, sidewalls are designed to meet periodic condition without removing the operating fluid or adjusting tail boards. Surface Mach number on the blade surface is applied to a responsible variable, and 12 design variables which are related with sidewall profile control are selected. A gradient-based optimization is adopted for wall design and CFX-11 is used for the internal flow computation. The computed result shows that it could obtain the same flow structure by modifying only the sidewalls of the double-passage cascade apparatus.

Synthesis of zinc oxide nanoparticles via aqueous solution routes (수용액 합성법에 의한 ZnO 나노분말의 합성)

  • Koo, Jin Heui;Yang, Jun Seok;Cho, Soo Jin;Lee, Byeong Woo
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.26 no.5
    • /
    • pp.175-180
    • /
    • 2016
  • ZnO nanoparticles were synthesized by aqueous preparation routes of a precipitation and a hydrothermal process. In the processes, the powders were formed by mixing aqueous solutions of Zn-nitrate hexahydrate ($Zn(NO_3)_2{\cdot}6H_2O$) with NaOH aqueous solution under controlled reaction conditions such as Zn precursor concentration, reaction pH and temperature. Single ZnO phase has been obtained under low Zn precursor concentration, high reaction pH and high temperature. The synthesized particles exhibited flakes (plates), multipods or rods morphologies and the crystallite sizes and shapes would be efficiently controllable by changing the processing parameters. The hydrothermal method showed advantageous features over the precipitation process, allowing the precipitates of single ZnO phase with higher crystallinity at relatively low temperatures below $100^{\circ}C$ under a wider pH range for the Zn precursor concentration of 0.1~1 M.