• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.1-8
• /
• 2005

Outdoor spaces are used for recreation, rest area, and night activities of residents. By these tendency, outdoor space is recognized as a very important space in residental areas. However, outdoor space is frequently used at night but lighting plan for these spaces is not suited for the selection of luminairce, arrangement of luminaires and planing of illuminance. From this point of view, this paper investigated the essence of light in outdoor space, analyzed different outdoor luminous environment and performed simulations. This paper finally suggested recommended level of illuminance and lighting plan of such spaces.

• Broadcasting and Media Magazine
• /
• v.14 no.4
• /
• pp.85-93
• /
• 2009

• Broadcasting and Media Magazine
• /
• v.21 no.4
• /
• pp.83-91
• /
• 2016

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.117-119
• /
• 2008

LED 조명기구가 복잡성을 가지는 도로조명의 배광을 달성하기 위해서는 조명용도에 맞도록 설계된 LED 2차렌즈가 필요하다. 도로폭 7m의 이면도로용 LED 조명기구에 적용되는 2차 렌즈를 설계하고 그 성능과 특성을 시뮬레이션 하였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.11-18
• /
• 2004

2003년 1월 27일 유럽의회 심의 법령 (2002/95/EC) RoHS(특정 유해 물질의 사용에 대한 규제) 6개 물질(수은, 납, 카드늄, 6가 크롬, PBB, PBDE)의 사용 규제가 조명기기를 포함한 전기전자기기에서 2006년 7월부터 실시될 예정인 바 앞으로의 광원류는 이를 해결해야 할 것으로 본다. 이를 해결하기 위한 대표적인 광원이 LED(light emitting diode)라고 볼 수 있을 것이다. 그림 1은 1879년 최초의 조명용 백열구를 시작으로 1990년대 말 무전극 PLS (Plasma lighting system) 및 LED램프를 시대별로 나타낸 것이다. (중략)

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.145-148
• /
• 2009

본 논문에서는 2007년도 유네스코 지정 세계자연유산으로 등재되어 많은 내외국인 관광객이 찾는 유명 관광지로 각광받고 있는 성산 일출봉 조명설비의 해석 및 모델링에 대하여 연구하였다. 정상으로 오르는 보행자도로 중에서 경사도가 완만한 잔디광장부분에서의 조명 기구 실태 파악하고 조도분포에 대하여 실측하였다. 적합한 관광지 조명 모델링을 위한 시뮬레이션을 통하여 쾌적하고 안전을 도모할 수 있는 설계안을 제시하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2007

This study proposes to increase the energy-saving effects by reducing excessive intensity of radiation of artificial lighting through analyzing daylight incident. A photosensor sends amounts of detected luminous flux to digital control unit(DCU) as a signal and then, it can decide dimming ratios, received a proper dimming signal from DCU. Generally it is effective to control artificial lighting with the different control ratio of each zone by setting a photosensor as same number and rows as artificial lighting. However, it is ineffective to do in initial costs of systems aspect in offices. As a result of grasping the distribution of daylight previously and analyzing daylight and dimming data, we can dim different dimming ratios to each zone of artificial lighting by a single photosensor.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.129-134
• /
• 2009

The actual conditions of school illumination was investigated. The illumination state was classified by the number of installed luminaires per 1 classroom. The illuminance state was measured and analyzed. The work surface illuminance was up to the standard, but the illuminance on blackboard was below standard when there was no local illumination. As a result of conducting a simulation based on the mesurement of the reflection factors of the classroom finishing materials and lamp replacement and lamp cleaning, nine luminaires for general lighting and local lighting for the blackboard were required, and the kind of design considered illumination maintenance was called for.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.14-23
• /
• 2009

The actual conditions of school illumination was investigated. The illumination state was classified by the number of installed luminaires per 1 classroom. The illuminance was measured and analyzed. The work surface illuminance was up to the standard, but the illuminance on blackboard was below standard when there was no local lighting. As a result of conducting a simulation based on the measurement of the reflection factors of the classroom finishing materials and lamp replacement and lamp cleaning, nine luminaires for general lighting and local lighting for the blackboard were required, and a design considering illumination maintenance was called for.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.221-224
• /
• 2008

본 논문은 일사량과 온도의 조건에 따른 태양전지 셀의 등가회로 모델을 모델링하였고, 이를 바탕으로 제작사의 태양광 모듈을 시뮬레이션하여 비교 검토하였다. 검토결과 태양광 모듈의 사양서와 시뮬레이션 값의 오차율이 낮아 신뢰성을 확보할 수 있었으며, 또한 최적인 태양광 모듈 어레이를 시뮬레이션하여 최적인 태양전지 모듈 어레이의 규모를 선택하여 독립형 태양광 시스템을 구현하였다. 또, 특정지역에 설치 최적인 출력전력도 시뮬레이션을 통하여 알아보았다.