• Current Photovoltaic Research
• /
• v.9 no.1
• /
• pp.11-16
• /
• 2021

In the past, marine pollution caused by radioactivity and wastewater discharge caused mass destruction. As an alternative, the land farming system became common and operational. In recent years, safety and environmental problems caused by declining population due to aging of fishermen and underdeveloped facilities have always been lurking, so improvement is urgently needed. As part of the new renewable energy 3020 plan announced by the government in 2017, a new model was proposed to improve the environment as well as save energy when the roof of a water tank farm was remodeled into a solar power system. Study, when the existing roof was remodeled and replaced with a water tank farm in Busan as an empirical model, the energy saving rate was analyzed by comparing the actual electricity consumption and power generation.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.1
• /
• pp.83-90
• /
• 2011

Lighting simulation is becoming increasingly more important as a method for design and evaluation. There is a wide range of packages that provide the accuracy and the usability in lighting simulation. Relux developed by Relux Informatik AG, Switzerland, Relux offers users innovative and high-performance light planning software with open interfaces and simultaneous access to the latest product data from luminaire and lamp manufacturers. The goals of this report is to explore some of the lighting simulation issues relating to Relux. It is hoped that it will provide some background information that will enable a designer and engineer to make some informed judgements on the potential of the current state-of-the-art in computer prediction of lighting in buildings and how this may be used to assist in building design.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.159-165
• /
• 2007

This paper presents a method for the derivation of model parameters of a co-generation system using data measured through on-site generator characteristic testing and validates its model parameters. Dynamic models such as generator, excitation system, and turbine/governor are mainly dealt in this paper. For the purpose of validation of derived model parameters, the measured results are compared with simulation results. The comparisons between measured results and simulation results show good match.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.61-65
• /
• 2002

RM(Switched Reluctance Motor)＇s Torque is generated by phase-current and inductance profile. A new analytical concept is proposed to determine the turn-off angle for maximization of the torque output. This paper describes a new method to maximization the average torque of a current control Switched Reluctance Motor. It is based on the simplified turn-off angle equation using least square method. Simulations carried out on a three-phase 6/4 pole SRM justify the algorithm is described. The suggested maximization average torque is verified by simulation in this paper.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.99-102
• /
• 2009

Fixture 일체형 LED 다운라이트(Downlight)의 광 효율 향상을 위하여 LED 장착위치 및 Reflector 길이, 히트싱크(Heat sink) 형태에 따른 광도(luminous intensity)와 기구효율(luminaire efficiency)을 시뮬레이션을 통하여 비교분석 하였다. 또한 히트싱크의 방열 설계를 시뮬레이션 하고 상용 LED 패키지 (Cree, XP-E P4)를 사용하여 시제품을 제작 하여 그 성능을 평가하였다. 그 결과 광속 9661m, 상관 색온도(CCT) 3,060K, 연색지수(CRI) 82의 광 특성을 갖는 LED 다운라이트를 개발하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.151-155
• /
• 2004

Millimeterwave OFDM wireless LAN system has been modeled for ACPR analysis. With simple AM-to-PM modeling for power amplifier and system simulation technique, power amplifier ACPR is simulated for OFDM modulation, Also, amplifier back-off value satisfying the required ACPR and the ACPR degradation have been predicted with the measured and modeled AM-tn-PM distortion.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1148_1149
• /
• 2009

반사형 전동 블라인드는 BEMS(Building Energy Management System)에 이용되는 조명 에너지 절감 장치로서, 블라인드 날개를 반사형 재질로 제작하여, 외부 채광이 블라인드 날개에 반사되어 천장에 반사되고 반사된 빛은 천장에서 확산되어 실내 깊숙이 부드럽고 균일한 조도를 공급해 준다. 이를 이용하면, 실내 거주자의 불편함 없이 실내 인공조명 사용량을 줄일 수 있다. 이를 구현하기 위해서는 태양광선의 고도의 변화에 따라 블라인드의 제어 각도를 계산하여 블라인드 제어 전동 모터를 구동해야 한다. 따라서 본 논문에서는 외부 채광을 실내 천장 면에 균일하게 반사할 수 있는 블라인드 날개의 제어 각도의 최적 조건을 제시하고, 컴퓨터 시뮬레이션을 통해 제시한 블라인드 날개 각도의 최적성을 검증하였다.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.240-243
• /
• 2006

This thesis is a study on the exactitude of Simulation Tool by using illuminate formula. Lightscape looks like general 3d program, but is a lighting simulation program that set up the properties of materials and light-sources about the model. This thesis calculates illuminance by a formula and simulates a light simulation using Lightscape for two luminaires data in space of ideal environment. As then each value was compared. As a result we got an error under 1% on the whole.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.543-546
• /
• 2011

기존의 형광등 또는 LED 평판등은 방사 형태를 제어하지 못한다는 단점이 있다. 본 연구에서는 이런 단점을 보안하기 위한 LED 모듈에 2차 렌즈를 부착하여 전 방향으로 방사 형태를 조절방법에 대해 시뮬레이션 분석을 하였다. 방사 각을 약 $100^{\circ}$로 시뮬레이션 하였으며, 기존의 조명기구들보다 설치간격을 넓게 하여도 광 균일가는 기존 조명기구들보다 더욱 향상됨을 알 수 있었다. 차후 LED 평판 등을 실제 제작하여 측정 및 분석할 예정이다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.4
• /
• pp.7-13
• /
• 2001

In this paper, the external-exciting electronic ballast for an 100[W] high pressure sodium lamp using full-bridge inviter is designed. The L-C parallel full-bridge invert circuit for P-SPICE simulation is designed. The values of inductor and capacitor in the proposed equivalent L-C parallel resonant tank circuit are calculated theoretically. Then the ballast for high pressure sodium lamp is implemented using the simulated results. In the experimental results, that is confirmed which the results of implemented ballast are really same with the of simulated one.