• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.247-247
• /
• 2012

기존형광등보다 에너지소비가 적고, 수명이 길다는 장점을 가진 LED소자는 조명분야뿐만 아니라 선박 및 해양플랜트시장에까지 적용분야가 확대되고 있다. 그러나 LED소자의 수명연장 및 제품신뢰성을 위해서 방열에 관한 연구가 필수적이며 특히, 해양환경적용을 위해서는 내부식성을 요구하는 방열 재료개발에 대한 연구가 필요하다. 일반적으로 방열판소재로 사용되는 알루미늄의 경우 열전도도가 우수하며, 대기 중에서 쉽게 생기는 자연산화막보다 내부식특성을 향상시키기 위해 현재 국내 외의 표면처리 방법으로 전기화학적 방법을 이용한 Anodizing기술을 적용하고 있다. 하지만, Anodizing에 사용되는 질산과 황산액을 처리하는 과정에서 유독물질을 발생시킴으로 유해물질사용제한 등 국제적으로 환경규제가 강화되고 있어 Anodizing기술의 적용이 제한적인 단점이 있다. 본 연구에서는 친환경적 기술인 Plasma Immersion Ion Implantation (PIII)방식을 사용하여 알루미늄표면에 $Al_2O_3$을 형성하였다. 최적의 산화막증착 조건을 찾기 위해 Gas Flow양, Pulse Voltage, 공정온도, 시간 등을 변수로 실험을 진행하였다. SIMS (Secondary ion mass spectroscopy)를 통해 $Al_2O_3$ 박막두께 및 Oxygen의 정량분석을 하였으며, Anodizing처리된 알루미늄시편과 열전도특성과 내부식특성을 비교하기 위해 각각 Hot Disk 열전도율측정기와 Salt water tester chamber를 사용하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.110.1-110.1
• /
• 2011

오리온 A 분자운은 별탄생이 활발하게 일어나는 영역이다. 때문에 분자운 연구를 통해서 별탄생을 연구하기에는 최적의 곳이다. 특기할 것은 Orion A에는 필라멘트 구조가 있다는 점이다. 필라멘트는 전형적으로는 길이 4.8pc, 너비 1.4 pc 로 제시되었다(Nagahama et al. 1998). 많은 미지의 조건들 가운데 필라멘트 구조는 별탄생에 대한 새로운 조명을 던져주는 데, 가령 분자운이 수축, 분열하며 작은 덩어리를 만드는 과정에 이런 기다란 구조가 별탄생에 어떤 과정에서 나타나며 이것이 별탄생이 어떤 효과를 발생하는지 연구되어야 하는 문제들이다. 대덕전파안테나의 1분의 분해능(Channel resolution 63 KHz/ Band Width 25 MHz) 의 12CO, 13CO(J=1-0) 분자선 관측으로 필라멘트를 이전 연구보다 자세하게 관측하여 이것 안에 있을 것으로 보이는 substructure들 연구하고자 한다. 관측영역은 적경: 5h 32m ~ 5h 37m, 적위: $-5^{\circ}$ 14' ~ $-5^{\circ}$ 37'으로 ($1^{\circ}{\times}1^{\circ}$) 영역을 관측하였다. 그 결과 필라멘트구조를 확인할 수 있었으며 약 0.7pc,약 $1000\;M_{\odot}$의 덩어리들이 이전관측에서 보여진 X자형태가 아니라 일자형태로 분포되어있는 것을 알 수 있었다. 관측된 최소덩어리는 star cluster mass이고 stellar size 의 덩어리는 별탄생 과정 이후 소멸된 것으로 보인다. 관측으로 확인된 덩어리들의 물리적인 성질과 분포를 깊이 연구해 보고자 한다. 향후 Orion A 전체를 추가로 관측하고자 한다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.11a
• /
• pp.249-254
• /
• 2004

광의 효율적 사용을 위해 표면에 마이크로 그루브가 새겨진 고성능 광학 부품의 개발이 활발하고, 이들 부품의 다량 생산을 위한 초정밀 금형제조기술이 각광을 받고 있다. 최근의 초정밀 미세 기계가공의 경우 간단한 공정으로 이러한 마이크로 그루브 금형을 제작할 수 있다. 특히 조명각 변조용 렌티큘러 렌즈와 같이 실린더형 그루브 금형의 경우에는 기존의 Lithography, MEMS, LIGA 등 광 에너지를 이용한 다른 제조방법들에서는 가공하기 어려운 점이 있으나, 기계가공에서는 쉽게 제작가능한 장점이 있다. 본 연구에서는 이러한 미세기계가공기술의 장점을 활용하여 U 형 마이크로 그루브를 가진 Lenticular 렌즈용 금형을 가공하고자 하였다. 가공에는 3 축 구동의 초정밀 미세 복합가공기와 단결정 천연 다이아몬드공구가 사용되었고, 가공방식은 마이크로 세이핑 공정을 적용하였으며, 가공 금형 재료에는 Brass와 무전해 Nickel이 사용되었다. 실험을 통하여 금형가공시의 절삭력, 칩 형상, 가공표면 등의 분석이 수행되었으며 이를 기반으로 여러 가지 가공문제점을 해결하고, 최종적으로 양호한 렌티큘러렌즈용 금형을 가공하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.5-9
• /
• 2000

The visual evoked potential was electrophysiological method for the identify of the EEG response on visual cortex. This test was objective test method on the eye function. This study was used the visual evoked potential for the objective color test. The subjects was a normal color function in Korean adults. The test condition was performed on the differens distance and illumination. According to convergence condition of color vision target. On the appearance of EEG wave of visual stimulation on visual cortex. The most EEG wave style was delta wave, and the next amount wave form was beta wave and theta wave, and the least EEG wave form was alpha wave. The histogram of amplitude of EEG wave form was almost non-Gaussian shape, and the phase diagram of amplitude was almost all linear shape. On the kinds of color vision target, the frequency of EEG wave style appeared a similar results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.488-496
• /
• 2012

In this paper, the scheme for designing optimal beamforming matrix for interference control is proposed. The optimal beamforming matrix is found though linear combination of interference alignment conditions and renewal of linear combination coefficient. The proposed scheme has advantages that the complexity is reduced and there is no multiplying operation in matrix calculations even if proposed scheme has the form similar to that of existing least square based scheme. The simulation results show that proposed scheme has about 4bps/Hz higher gain than existing least square scheme. Also there is no additional multiplying calculation and increase of matrix size when the number of transmit and receive antennas is increased.

• Journal of Digital Contents Society
• /
• v.9 no.3
• /
• pp.509-516
• /
• 2008

We propose the Hybrid Rendering model to support multi-resolution for computer graphics. LOD method for computer graphics system considering performance of device environment and end-user preference usually adopts mesh resolution, mipmap in texture rendering, or oct-tree data structure in ray tracing. The hybrid rendering model, as a local shading model combining Gouraud shading model and a flat shading model, applies a proper shading method to each of polygons consisting of an object. This method can be an effective alternative to reduce real-time rendering time so that it can be utilized in real time adaptive service of computer graphic contents among various device environments under ubiquitous environments.

• Design & Manufacturing
• /
• v.11 no.2
• /
• pp.42-45
• /
• 2017

Currently, the mobile device is required to be miniaturized and lightweight according to the needs of the consumer. For this purpose, each part is produced and assembled in units of modules. Accordingly, the display part is also composed of a cover glass, a touch screen, And it costs a large amount to replace the whole when it is damaged. Therefore, we propose a method to improve the durability of display part using ANOVA (Analysis of Variance) and MR fluid polishing. Before MR fluid polishing process, surface treatment was performed to obtain a polishable surface. A series of experiments were carried out to very fine surface roughness and to secure durability of cover glass. Polishing depth, feed rate, and abrasive size were selected to examine the MR fluid polishing results.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.51-55
• /
• 2017

Micro fuel cells have high reliability and long usage time. Among them, PEMFC (polymer Electrolyte Membrane Fuel Cell) is suitable as a portable power source because it is easy to fix electrolyte and simple structure. The bipolar plate, a key component of the fuel cell, is produced by cutting. In the case of micro fuel cell separator, burr is very small and the flow channel size in the separator is very small. Therefore, it is difficult to remove burrs in the usual way such as a brushing or ultra-sonic method. Therefore, this study proposed electrolytic polishing process and analyzed the characteristics of each condition by introducing the concept of roughness reduction rate. In addition, the ultrasonic process was added to analyze the effect of ultrasonic addition.

• IE interfaces
• /
• v.11 no.2
• /
• pp.39-48
• /
• 1998

It is strongly believed that Video on Demand(VOD) will become one of the most promising services for Broadband Integrated Services Digital Network(B-ISDN). VOD service can be classified into two types of services: Near VOD(NVOD) and Interactive VOD(IVOD). Although VOD network requires many kinds of resources, we only consider video servers, programs. and storages. In the network. some video servers should be installed at some nodes(especially, at the root node for NVOD service). so that each node with video server stores video programs and distributes stored programs to customers. We take into account three kinds of costs related with the above resources: a program transmission cost, a program storage cost, and a video server installation cost. There exists a trade-off relationship among those three costs according to the locations of video servers and the kinds of programs stored at each video server. Given a multi-level VOD network and the total number of programs being served in the network. the resource. optimization problem for providing both IVOD and NVOD services is to determine where to install video servers, and which and how many programs should be stored at each video server, in order to minimize the total cost. In this paper we develop an efficient dynamic programming algorithm to solve the problem. We also implement the algorithm based on two different service policies assumed in this paper.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.3 s.246
• /
• pp.262-269
• /
• 2006

Segregation algorithms of the incompressible Wavier-Stokes equations using P1P1/P2P1 finite element formulation are newly proposed. P1P1 formulation allocates velocity and pressure at the same nodes, while P2P1 formulation allocates pressure only at the vertex nodes and velocity at both the vertex and the midpoint nodes. For a comparison of both the elapsed time and the accuracy between the two methods, they have been applied to the well-known benchmark problems. The three cases chosen are the two-dimensional steady and unsteady flows around a fixed cylinder, decaying vortex, and impinging slot jet. It is shown that the proposed P2P1 semi-segregation algorithm performs better than the conventional P1P1 segregation algorithm in terms of both accuracy and computation time.