• Journal of Biomedical Engineering Research
• /
• v.38 no.4
• /
• pp.183-189
• /
• 2017

Electrosurgical Unit(ESU) is medical equipment that cut or coag tissues using electrical energy. It is used in hospitals' outpatient clinic room and operating room. Improper use of an ESU may cause fatal injuries to the patient, such as burns. So, before using an ESU, make sure that it is supplying enough energy for cut and coag by measuring the output power and checking the output power cable. In this study, we developed a simple ESU power measurement system PW100 that allows anyone to check the basic output power. And PW100 can check the state of the cable associated with the output power before using ESU. Then, we compared the measured output power of the PW100 with an ESU Analyzer which was commercialized, and compared the performance. In the experiment, the output power measured by the PW100 was lower value than an ESU Analyzer's that. However, the PW100's output power measured in the 5% error range and showed stable reproducibility by a low %RSD value.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.696-704
• /
• 2013

In this paper, we introduce the LED emotional lighting system realized with the aid of both intelligent algorithm and RGB LED combined with White LED. Generally, the illumination is known as a design factor to form the living place that affects human's emotion and action in the light- space as well as the purpose to light up the specific space. The LED emotional lighting system that can express emotional atmosphere as well as control the quantity of light is designed by using both RGB LED to form the emotional mood and W LED to get sufficient amount of light. RBFNNs is used as the intelligent algorithm and the network model designed with the aid of LED control parameters (viz. color coordinates (x and y) related to color temperature, and lux as inputs, RGBW current as output) plays an important role to build up the LED emotional lighting system for obtaining appropriate color space. Unlike conventional RBFNNs, Fuzzy C-Means(FCM) clustering method is used to obtain the fitness values of the receptive function, and the connection weights of the consequence part of networks are expressed by polynomial functions. Also, the parameters of RBFNN model are optimized by using PSO(Particle Swarm Optimization). The proposed LED emotional lighting can save the energy by using the LED light source and improve the ability to work as well as to learn by making an adequate mood under diverse surrounding conditions.

• Journal of Internet Computing and Services
• /
• v.6 no.4
• /
• pp.93-102
• /
• 2005

In Recent times, Netizens have frequently use virtual character 'Avatar' schemes in order to present their own identity, there is a strong need for avatars to resemble the user. This paper proposes an extraction technique for facial region and features that are used in generating the avatar automatically. For extraction of facial feature component, the method uses ACM and edge information. Also, in the extraction process of facial region, the proposed method reduces the effect of lights and poor image quality on low resolution pictures. this is achieved by using the variation of facial area size which is employed for external energy of ACM. Our experiments show that the success rate of extracting facial regions is $92{\%}$ and accuracy rate of extracting facial feature components is $83.4{\%}$, our results provide good evidence that the suggested method can extract the facial regions and features accurately, moreover this technique can be used in the process of handling features according to the pattern parts of automatic avatar generation system in the near future.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.162-170
• /
• 2011

Through this thesis, I intended to analyze Hollywood animation through that achieved in box office by directing viewpoint. of Chris Sanders and Dean Deblois not only shows standard narrative structure of adventure, comedy, fantasy, but also express message of story and thorough visual. Analysis of directing classify contents and form. In contents, constitution of narrative and set up of character, irony of plot, characterization and popularity are embossed. In form, lighting and special effect, design and layout, 3D technology and stereoscopic camera technique based on the capital strength are outstanding. The high evaluation for film is possessed of box offic, remained within value and popularity, and delivered metaphysical theme without repulsion. The director's direction make success even if the pre-production manage by huge system approach.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.11-17
• /
• 2004

We tried to design and manufacture a night scope which is used in the leisure sports field. The whole system consists of an IR light source part, an objective lens part, an intensifier tube part and an eye_piece lens part. We designed an objective lens part to the infinite object imaging optical-system with 80mm focal-length, 40mm effective-aperture and 14mm image-field-size of which the chromatic aberration is reduced by using materials of BK7 and FD4. The resolution of this system is about 25lines/mm at the 40% MTF value criterion. The eye_piece lens is adopted goods to be used commercially to save cost of production. The design technique which gets in this development will be utilized greatly in good developments of the dot, the sight and the day/night riflescope system at the hereafter.

• The Journal of the Korea Contents Association
• /
• v.9 no.10
• /
• pp.13-21
• /
• 2009

This paper describes research of image enhancement for detection of face area. Typical face recognition algorithms used fixed parameter filtering algorithms to optimize face images for the recognition process. A fixed filtering scheme introduces errors when applied to face images captured in various different environmental conditions. For acquiring face image of good quality from the image including complex background and illumination, we propose a method for image enhancement using the categories based on the image intensity values. When an image is acquired average values of image from sub-window are computed and then compared to training values that were computed during preprocessing. The category is selected and the most suitable image filter method is applied to the image. We used histogram equalization, and gamma correction filters with two different parameters, and then used the most suitable filter among those three. An increase in enrollment of filtered images was observed compared to enrollment rates of the original images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1207-1212
• /
• 2015

In this paper, we propose three-dimensional (3D) visualization and recognition techniques of micro-objects under photon-starved conditions using photon counting integral imaging microscopy. To capture high resolution 2D images with different perspectives in the proposed method, we use Synthetic Aperture Integral Imaging (SAII). Poisson distribution which is mathematical model of photon counting imaging system is used to extract photons from the images. To estimate 3D images with 2D photon counting images, the statistical estimation is used. Therefore, 3D images can be obtained and visualized without any damage under photon-starved conditions. In addition, 3D object recognition can be implemented using nonlinear correlation filters. To prove the usefulness of our technique, we implemented the optical experiment.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.4
• /
• pp.251-257
• /
• 2014

This research is focused on coagulation and sand filtration process as a pretreatment of RO seawater desalination. RO systems require sufficient and reliable pretreatment process to produce superior quality of RO feedwater that can mitigate RO membrane fouling. This experiment was conducted to investigate the effectiveness of coagulation and filtration process under various experimental conditions including different coagulant dose, flocculation mixing intensity and time, turbidity, and filtration rate. The experimental results showed that the optimum pretreatment conditions resulting in lower SDI value suitable for RO feedwater were coagulation pH 6.5, raw water turbidity greater than 4 NTU, and media bed depth greater than 550 mm. However, flocculation mixing intensity, coagulant dose, and filtration rate relatively affected little on the filtration efficiency.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.12
• /
• pp.671-676
• /
• 2016

Recently, according to the limelight of Fintech, simple payment using biometric at smartphone is widely used. In this paper, we propose a new contactless biometric method using thumb image without additional sensors unlike previous biometrics such as fingerprint, iris, and vein recognition. In our method, length, width, and skin texture information are used as features. For that, illumination normalization, skin region segmentation, size normalization and alignment procedures are sequentially performed from the captured thumb image. Then, correlation coefficient is calculated for similarity measurement. To analyze recognition accuracy, genuine and imposter matchings are performed. At result, we confirmed the FAR of 1.68% at the FRR of 1.55%. In here, because the distribution of imposter matching is almost normal distribution, our method has the advantage of low FAR. That is, because 0% FAR can be achieved at the FRR of 15%, the proposed method is enough to 1:1 matching for payment verification.

• Korean Journal of Optics and Photonics
• /
• v.23 no.2
• /
• pp.55-63
• /
• 2012

We present results of optical design and fabrication of a light guiding plate (LGP) to be used as an illumination system for photobioreactors. Modeling of a light-emitting diode (LED) light source, a reflection film, and LGP patterns was performed. Especially, the LGP patterns were modeled as Lambertian scatterers. The modeling parameters (reflectance, scatterer width) were determined through matching simulations with the experimentally measured illuminance distribution for a test LGP. An LGP for an LED light source was designed with the extracted model parameters, and fabricated using a computerized numerical control machine. Optical characteristics including average illuminance and uniformity of illuminance distribution were measured for the fabricated LGP.