• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.26.2-26.2
• /
• 2010

이 연구는 Ashen light 측정을 통해 전 지구 반사율을 구하는 통합적 광선 추적 모델을 구성하고 그 수치모사 성능을 검증하는데 목적을 두고 있다. 통합적 광선 추적 모델은 태양-지구-달 시스템에 대하여 태양 복사에너지의 광경로를 추적함으로써 최종적으로 저궤도 상에 존재하는 광학계에 도달하는 Ashen light과 moonshine의 조도를 수치 모사하는 기법이다. Ashen light은 구형의 태양에서 출발한 $1.626\times10^{26}W$의 에너지를 가지는 400nm에서 700nm 파장대역의 빛이 램버시안 특성을 지니는 구형의 지구에서 반사된 후 램버시안 특성을 가지는 구형의 달에서 재 반사되어 저궤도상의 광학계로 입사하는 빛이고, moonshine은 달에서 직접 반사되어 저궤도상의 광학계로 입사하는 빛이다. 통합적 광선 추적 수치 모사를 이용하여 구한 Ashen light과 moonshine의 조도는 1차 근사 해석적 방법을 이용한 계산 결과와 측정 오차 범위 이내의 오차를 보였다. 최종 연구 결과 Ashen light과 moonshine의 조도를 이용하여 구한 지구 반사율과 1차 근사 해석적 방법을 이용한 지구 반사율 계산의 결과가 유사함을 증명하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.771-778
• /
• 2019

The traditional illuminance intensity detection method using a single sensor has a problem that uniformity of illuminance detection is deteriorated depending on the measurement position due to the narrow FOV characteristic. In order to overcome this problem, a method of detecting an average illuminance value through a plurality of illuminance sensors is used, but the complexity and detection error are increased. In this paper, we propose a illuminance intensity detection method based on a single image sensor with wide FOV. The proposed method can solve the problems such as system complexity and error increase of existing illuminance sensor. The test results show that the difference of average value is 12% using a illuminance sensor, 10.7% using five illuminance sensors, and 6.2% using an image sensor compared with the reference value using the color difference illuminometer. It is confirmed that the proposed method can easily and accurately detect the space illuminance with improved uniformity.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.2
• /
• pp.176-183
• /
• 2007

In order to analyze the experimental results obtained from the model riverbed filtration performed by Ahn et al. a mathematical model was developed to simulate the flow through the lateral. The discharge rates at each section of the lateral measured by Ahn et al. were compared with the model predictions, and they matched favorably. The Manning's roughness coefficients of all the laterals employed in the study of Ahn et al. were determined using the model. Results show that the roughness coefficient becomes larger with the increase in the entrance velocity to the collector well, and that the coefficient ranges from 0.012 to 0.015 under the normal operational conditions of the riverbed filtration. Results also show that the coefficient becomes smaller as the lateral diameter increases.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.524-524
• /
• 2023

하천 내 식생의 분포는 흐름저항의 증가와 수위상승에 큰 영향을 미치는 요소 중 하나이다. 동일한 단면정보를 가졌더라도 식생이 분포하는 하도는 식생이 없는 하도에 비해 흐름저항으로 인해 유속이 현저히 느려져 홍수위 상승을 유발하기 때문이다. 따라서 식생의 종류, 크기, 분포 형태, 잎의 밀도 등에 따라 흐름저항계수를 정량화하며 흐름을 정확히 예측하는 것이 필요하다. 본 연구에서는 2019년 한국건설기술연구원 하천실험센터에서 진행된 식생하도에 대한 실규모 실험의 조건과 지형정보를 HEC-RAS(Hydrologic Engineering Center's River Analysis System) 1차원 수치모형에 입력하고, 식생 패치의 분포를 고려한 Manning's n의 공간적 분포 및 적용방식에 따른 수면 경사 재현 정확도에 대한 민감도 분석을 수행하였다. 실험은 상단 폭 11 m, 경사 1:2(V:H)의 사다리꼴 단면을 가진 실규모 수로에서 70 m 길이의 구간을 대상으로 진행되었다. 실험 구간 내 6개의 압력식 수위계를 설치해 수위 측정 및 수면 경사 산정을 실행하였다. 실험 조건으로 적용된 인공 식생패치의 분포 및 밀도 조건은 3가지로 큰 패치와 작은 패치로 구성된 조밀한 조건, 단일 패치로 구성된 조밀한 조건, 단일 패치로 구성된 성긴 조건이었으며, 모두 정수(emergent)상태로 진행되었다. 적용된 패치의 형상은 내성천에서 조사된 자연 형태의 식생패치 형태를 참고하였으며, 버드나무 종을 모사하였다. 실험 조건에 따라 유량은 각각 평균 1.5 cms와 2.7 cms로 공급하였으며, 평균 수심은 약 1 m로 측정되었다. 위 실험 내용을 바탕으로 수치모의를 위한 경계조건과 지형정보를 수립하였으며 모의 케이스는 크게 두 가지로, 수로 내 식생의 분포를 종방향으로 고려한 케이스와 횡방향으로 고려하여 조도계수를 적용한 케이스로 분류하였다. 모의에 적용된 조도계수는 실험에서 획득한 데이터와 베르누이 방정식을 활용하여 산정되었으며, 두 케이스에 대한 모의 결과는 실험에서 관측된 수위와 비교하였다. 본 연구에 따르면 여러 개의 식생패치가 정수상태로 존재하는 하천에 대한 1차원 수치모의 시 식생의 분포를 종방향으로 고려하여 하나의 구간조도계수를 적용하는 방식이 종횡단면의 식생패치 위치를 고려한 조도계수를 세분화하여 적용하는 방식에 비해 수위 계산 정확도가 상대적으로 높은 것으로 나타났다.

• Journal of Korea Water Resources Association
• /
• v.41 no.5
• /
• pp.503-515
• /
• 2008

In this study we calculate discharge by slope-area method using continuously observed water level data and analyse the results. This study is performed in the Dalcheon river reach of 960 m length including riffles and a pool, which is located downstream of the Goesan Dam. Three values of roughness coefficient are applied to discharge calculation, which are established using bed material size analysis. Another roughness coefficient value obtained from the river improvement plan is also used. Calculated discharges by slope-area method are compared with dam discharges. Relative difference from dam discharges appears to be largely affected by roughness values and a value of 0.042 or more seems most suitable for the entire study reach. Smaller roughness value is suitable to the reach which has gentler water surface slope than mean channel slope of the entire study reach, while a larger value to steeper reach. In case roughness value is set considering overall slope of the channel, it is desirable to select the entire calculation reach including both gentler and steeper sub-reaches. Since relative difference becomes nearly constant at over 500 cms, in case that verification of applied roughness is conducted with other directly measured discharge, accuracy of measurement by slope-area method for larger discharge may be improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.333-338
• /
• 2021

This study determined the characteristics of LED illumination and photosynthetically active radiation flux density (PPFD) for LED lighting design in an indoor plant factory. This was done based on the light wavelength and PPFD intensity required for plant growth. It has been found that the wavelength and intensity are decreased according to the measuring distance, and green light has an important role in illumination characteristics, while blue light has an important role in the PPFD characteristics. Considering only the photosynthetic properties of plants, the effective order of photosynthesis was blue>red>white>green. When the measurement distance was 30 [cm], it was found that reduction levels of 60 [cm], 90 [cm], and 120 [cm] decreased to about 36 [%], 18 [%], and 10 [%], respectively. As a result of the characteristics of mixed light (red:blue=2:1, 3:1, 4:1) and the measurement distance, when the measured value at 30 [cm] is 100%, the measured value at 120 [cm] is 10-11 [%]. From the obtained results, an optimal structure was proposed for maximizing the light efficiency of an indoor greenhouse for future research.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.136-142
• /
• 2006

This paper presents irradiance distribution model of light radiated from a step-index multimode optical fiber. The model is important in analysis of displacement response characteristics for intensity modulation type optical fiber sensors. The induced model was verified by experimental results. And the displacement response analysis result induced by using the irradiance distribution model was verified by experimental results and compared with using existing irradiance distribution models such as the constant model or the gaussian model. The experiment has better agreement with the analysis result using the induced model in this study than with the others models.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.47-52
• /
• 2018

Recently, the appearance of the library has changed dramatically more than ever, and it is true that the spatial factor of the library is a big part of this change. The purpose of this study is to establish the criteria for improvement of the illuminance standard of library by comparing analysis of related workd related to illumination, survey, and illuminance related standards of each country. In order to achieve the purpose of research, we measured the illuminance and the users' perceptions of the 14 public libraries in the D region. Finally, the comparison of domestic and international illuminance standards should be improved in the future. As a result of the analysis, it is found that the domestic illumination standard (KSA 3011) needs to be supplemented in accordance with the environment and the case of each country. Also, it is necessary to recognize the importance of differentiation and illuminance according to the age group of users. This study is expected to be a basic research that will raise the interest of the overall illumination improvement and illumination management of the library in the future. In addition, it is expected that it will be a great power for the improvement of the environment including the illumination of the public library in Korea if the interest is maintained based on the revision of the domestic illumination standard in accordance with the revised tendency of overseas recommendation and the continuous research on the future illumination of the library.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4740-4744
• /
• 2012

The purpose of this paper was to make a LED light control module using Zigbee. The module was made so that brightness of the LED light changes according to the ambient brightness. A 8-bit microcontroller was used to implement the module to enable LED dimming and wireless light intensity measurement. Using the proposed method, power consumption can be improved by up to 48% on average, with 3.4-0.4W changes in power. The measured ambient light intensity values are converted from analog to digital and outputted as a PWM waveform. According to the output waveform and changes in the current outputted from the LED driver, the brightness of the LED light is controlled. Also, Zigbee with close-range wireless communication capabilities was used to enable wireless transmission of light intensity measurements.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.129-134
• /
• 2009

The actual conditions of school illumination was investigated. The illumination state was classified by the number of installed luminaires per 1 classroom. The illuminance state was measured and analyzed. The work surface illuminance was up to the standard, but the illuminance on blackboard was below standard when there was no local illumination. As a result of conducting a simulation based on the mesurement of the reflection factors of the classroom finishing materials and lamp replacement and lamp cleaning, nine luminaires for general lighting and local lighting for the blackboard were required, and the kind of design considered illumination maintenance was called for.