• 소음진동
• /
• 제9권3호
• /
• pp.613-620
• /
• 1999

디스크 두께 변화(DTV)에 의해 야기되는 져더현상은 일반적으로 차체진동, 브레이크 페달 떨림, 그리고 스티어링 휠의 떨림에 의해 감지된다. 이번 연구에서는, 차수분석 및 Operational Vibration Analysis(OVA)를 통해 차체진동이 DTV profile에 의해 어떻게 영향을 받는지를 중점적으로 조사하였다. 진동 측정위치는 knuckle, lower arm, lower arm 연결 차체부위이고, 져더 발생 DTV profile도 실측하였다. 시험 분석 결과, DTV는 져더현상에 차수별 상대적인 방향 기여도를 나타내며 특히 디스크 회전 2차 성분은 차량진행 방향으로의 lower arm 진동을 현저하게 야기시키는 것으로 나타났다. 이러한 시험 및 분석 기술은 져더 현상을 진단하고 문제를 개선하는데 유효하리라고 예측된다.

• 한국소음진동공학회논문집
• /
• 제12권5호
• /
• pp.338-345
• /
• 2002

The study presents a new testing and analysis method for brake judder on vehicle. For the identification of the excitation mechanism of a brake judder, it is necessary to measure the dynamic brake disc geometry during braking on vehicle. The non-contact sensor system was used to monitor the brake disc geometry. Brake torque variation (BTV) caused by disc thickness variation (DTV) is the primary excitation for brake judder. The mechanical effects generating BTV are linked not only to initial manufacturing tolerances but also to uneven wear. Therefore, the brake disc geometry should be strictly managed to initial condition. The aim of this study has been to measure the dynamic DTV and runout on vehicle and analyze the influence of test parameters on brake judder and compare the disc component with vehicle matching about the DTV Profile. As a result of this study, The amplitude of brake judder is proportional to vehicle speed and fluid pressure fluctuation on braking. The major sources of brake judder are directly related to disc thickness variation and side runout variation of corner assembly (disc, hub. bearing).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.764-769
• /
• 2001

Brake-induced vibrations of a vehicle such as brake judder are determined by the excitation of brake torque variations and by their transfer to the driver's contact points via suspension, body and steering system. The formation of brake torque variation is mainly determined by static and dynamic disk thickness variations. The vibration transfer from the excitation by brake torque variation to the perception by the driver depends on the kinematic and dynamic behaviour of the components in the transfer path. Optimization of the judder performance can be achieved either by minimizing the excitation or by reduction of the judder sensitivity of the vehicle. In this paper, the optimization process of a front rotor is suggested to reduce brake judder considering the cooling performance of the rotor, the judder sensitivity of the vehicle and durability of the rotor.