• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.388-393
• /
• 1999

In this study, the $CaSO_4:Eu$ TLDs are fabricated and their trap parameters are determined. The optimum concentration of Eu for fabrication of the $CaSO_4:Eu$ TLD is 0.5 mol% and optimum temperature is $600^{\circ}C$ for 2 hours sintering in air. The glow curve of $CaSO_4:Eu$ consists of two glow peaks and these peaks are isolated by thermal bleaching method. Trap parameters of two glow peaks are measured using the initial rise, the peak shape, the heating rate and the least square curve fitting methods. The activation energies of the glow peak I and II are 1.00 eV and 1.09 eV, and the frequency factors are $7.04{\times}10^{11}\;s^{-1}$ and $5.12{\times}10^{11}\;s^{-1}$ and the kinetic orders are 1.11 and 1.33, respectively.

• Korean Journal of Food Science and Technology
• /
• v.14 no.2
• /
• pp.151-155
• /
• 1982

Effects of vitamins, metabolic intermediates and several inorganic mineral salts on the biomass and lipid accumulation of Mucor plumbeus were investigated after 15 days of incubation at $37^{\circ}C$ under static culture condition. The optimum concentrations of various vitamins were ${\gamma}/l$ for biotin, and 0.01 g/l for nicotinic acid, pyridoxine, thiamine and riboflavin. Among them pyridoxine was the most stimulatory. The maximum felt weight and lipid content per 50ml medium were $2.82{\pm}0.14\;g$ and 62.8%. Triglyceride content of neutral lipid produced under this condition was 64.9%. The major fatty acids were oleic acid (50.0%), linoleic (23.8%) and palmitic acid (13.9%). Malonic acid was considered not to be desirable even though it stimulated the biomass and lipid accumulation because triglyceride content was lowered considerably comparing with control. $MgSO_4{\cdot}7H_2O$ was the most stimulatory among the various magnesium salts and its optimum concentration was 5 g/l. Mucor plumbeus did not require $NaH_2PO_4$ for the stimulation of felt and lipid production. However, the addition of $MnCl_2$ at the concentration of 2 g/l was stimulatory to show $2.76{\pm}0.28\;g$ of felt/50 ml and 56.4% lipid content, and 73.9% triglyceride in the neutral lipid.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.608-615
• /
• 2000

A determination method of trace nickel and cobalt in water samples was studied and developed by adsorbing their complexes on ion exchange resin suspension. The analytical ions were formed as complexes with a ligand of APDC (ammonium pyrrolidinedithiocarbamate) and adsorbed on anion exchange resin of Dowex 2-X8. After the suspension was filtered out with membrane filter, the complexes were dissolved in HCl solution by an ultrasonic vibrator for ET-AAS determination. Several conditions were optimized as followings. pH of sample solution: 5.0, amount of ligand APDC: more than 430 times in mole ratio, the type and concentration of acid: 0.1 M HCl, and vibration time: 7 minutes. The addition of palladium in the HCl solution could improve the reproducibility and sensitivity by a matrix modification in the absorbance measurement. This procedure was applied for the analysis of three kinds of real water samples. The detection limits equivalent to 3 times standard deviation of blank were Co 0.36 ng/mL and Ni 0.27 ng/mL and recoveries in spiked samples were 99-102% for cobalt and 100-105% for nickel.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.320-328
• /
• 2012

The purpose of this study was to evaluate the tooth whitening and properties of an enamel surface after treatments with tooth bleaching agents that contained dicalcium phosphate dihydrate (DCPD) and hydrogen peroxide (HP). Thirty specimens were obtained from fifteen premolar and were randomly divided into three groups (n=10): 1, 3.5% HP + 0 g DCPD; 2, 3.5% HP + 0.1 g DCPD; 3. 3.5% HP + 1 g DCPD. All groups were bleached 8 hours per day for 14 days. With increasing DCPD concentration, the pH values in the agents increased, making it less acidic. However, there was no statistically significant difference (p>.05). As the concentration of DCPD was increased, the concentration of Ca and P was also increased. In all groups, after the tooth whitening, the tooth color was found to have a value of $L^*$ (p<.05). All groups showed significantly decreased enamel microhardness compared to their baseline (p<.05). The percentage microhardness loss (PML) of the group A1 and A2 were significantly lower than that of group A3. The obvious variation of morphology was observed on enamel surfaces in group A1. Following an analysis of the constituents of enamel surface after bleaching, as DCPD content was increased, the amount of Ca and P was increased. In this study, the experimental results suggest that DCPD/HP agent less demineralization changes such as the erosion morphology and hardness loss without compromising whitening efficiency.

• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.685-691
• /
• 1992

The $d^8$-transition metal complexes containing diphosphine, $MCl_2PP$ were prepared by using $K_nMCl_m$ as starting materials, wherein M were Ni(II), Pd(II), Pt(II) and Au(III) and PP were bis(diphenylphosphino)methane(dppm), bis(diphenylphosphino)ethane(dppe), bis(diphenylphosphino)propane (dppp) and bis(diphenylphosphino)ethylene(dppety). The complexes were characterized by the spectral property $(^H-NMR$, $^{31}P-NMR$ and UV-Visible spectra) together with elemental analysis. The complexes were tested for the catalytic activity on the formation reactions of 3(2H)-furanone and cyclic carbonate. The only Ni(II)- and Pd(II)-diphosphine complexes displayed a good catalytic effects in the production of 3(2H)-furanone from 2-methyl-3-butyn-2-ol [reaction (1)]. But all the diphosphine complexes as catalyst were almost inactive towards cyclic carbonate production preaction [reaction (2)].

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.359-369
• /
• 2011

The study was carried out to investigate the quality characteristics of pellets manufactured with adding soybean oil, waste soybean oil, ozonized soybean oil and ozonized waste soybean oil to Larix kaemferi Carr sawdust. The characteristics of pellet included moisture contents, heating value, ash contents, apparent densities, durabilities, absorption ratio and elementary analysis. Moisture contents were shown 7.66~9.48% which satisfied the first grade (less than 10%) of quality standard of wood pellets announced by Korea Forest Research Institute. The heating value of the manufactured wood pellets in this study exceeded the first grade of quality standard (more than 4,300 kcal/kg) and it appeared that the pellets manufactured with adding oils and ozonized oils had more heating value than the control pellets. Ash contents 0.34~0.42% also passed the first grade (less than 0.7%) of quality standard and apparent densities were adequate for the first grade (640 kg/$m^3$) on the quality standard. Durabilities of the pellets manufactured with adding soybean oil and ozonized waste soybean oil were shown over the first grade (97.5 kg/$m^3$) of quality standard. In the general results of durabilities, the pellets manufactured with additives had better values than the control pellets. After 24 hours absorption ratio experiment, absorption ratio of pellets manufactured with additives also appeared much lower moisture absorption than the control pellets and they still had the same results after 5days absorption ratio experiment. Elementary analysis of the sulfur content was satisfied the first grade (less than 0.05%) of quality standard of wood pellets and the nitrogen content was also adequate for the first grade (less than 0.3%) of quality standard of wood pellets.

• The Journal of Natural Sciences
• /
• v.7
• /
• pp.37-46
• /
• 1995

Electrochemical behavior of $Ln^{3+},$-ALC complexes($Gd^{3+},$ $Tb^{3+},$ $Dy^{3+},$ $Ho^{3+},$ $Er^{3+},$ $Yb^{3+}$ and $Lu^{3+}$-alizarin complex-one) has been investgated by d.c polarography, differential pulse polarography and cyclic voltammetry. The reduction mechanism of ALC comes to the conclusion that the two electron make one step of reversible processes, and that there is few adsorption in the electrode reaction. The new complex is made from one lanthanide ion and one ALC. This complex is proven to make an adsorptive complex wave, by the experiments of differential pulse polarography and cyclic voltammetry. The reduction potential of complex wave($P_2$)turns up more negatively than ligand wave($P_1$) does. Linear calibration curves of the decreasing P1 and increasing $P_2$ is obtained when the lanthanide concentration varys from $2.5X10^5$M to $1X10^4M$.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.336-344
• /
• 1996

The extraction of trace cobalt, copper, nickel, cadmium, lead and zinc in urine samples of organic and alkali metal matrix into chloroform by the complex with a dithizone was studied for graphite furnace AAS determination. Various experimental conditions such as the pretreatment of urine, the pH of sample solution, and dithizone concentration in a solvent were optimized for the effective extraction, and some essential conditions were also studied for the back-extraction and digestion as well. All organic materials in 100 mL urine were destructed by the digestion with conc. $HNO_3$ 30 mL and 30% $H_2O_2$ 50 mL. Here, $H_2O_2$ was added dropwise with each 5.0 mL, serially. Analytes were extracted into 15.0 mL chloroform of 0.1% dithizone from the digested urine at pH 8.0 by shaking for 90 minutes. The pH was adjusted with a commercial buffer solution. Among analytes, cadmium, lead and zinc were back-extracted to 10.00 mL of 0.2 M $HNO_3$ from the solvent for the determination, and after the organic solvent was evaporated, others were dissolved with $HNO_3-H_2O_2$ and diluted to 10.00 mL with a deionized water. Synthetic digested urines were used to obtain optimum conditions and to plot calibration-eurves. Average recoveries of 77 to 109% for each element were obtained in sample solutions in which given amounts of analytes were added, and detection limits were Cd 0.09, Pb 0.59, Zn 0.18, Co 0.24, Cu 1.3 and Ni 1.7 ng/mL, respectively. It was concluded that this method could be applied for the determination of heavy elements in urine samples without any interferences of organic materials and major alkaline elements.

• Investigative Magnetic Resonance Imaging
• /
• v.8 no.1
• /
• pp.32-41
• /
• 2004

Purpose : To measure the NMR relaxation properties of MnPC, to observe the characteristics of liver enhancement patterns on MR images in experimentally implanted rabbit VX2 tumor model, and to estimate the possibility of tissue specific contrast agent for MnPC in comparison with the hepatobiliary agent. Materials and Methods : Phthalocyanine (PC) was chelated with paramagnetic ions, manganese (Mn). 2.01 g (5.2 mmol) of phthalocyanine was mixed with 0.37 g (1.4 nlmol) of Mn chloride at $310^{\circ}C$ for 36 hours and then purified by chromatography ($CHCl_3:\;CH_3OH=98:2$, volume ratio) to obtain 1.04 g $(46\%)$ of MnPC (molecular weight = 2000 daltons). The T1/T2 relaxivity (R1/R2) for MnPC were determined at a 1.5 T (64 MHz) MR spectrometer. VX2 tumor model was experimentally implanted in the liver parenchyma of rabbits. All MR studies were performed on 1.5 T. The human extremity radio frequency coil of a bird cage type was employed. MR images were acquired at 17 to 24 days after VX2 carcinoma implantation.4 mmol/kg MnPC and 0.01 mmol/kg Mn-DPDP were injected via the ear vein of rabbits. T1-weighted images were obtained with spin-echo (TR/TE=516/14 msec) and fast multiplanar spoiled gradient recalled (TR/TE : 80/4 msec, $60^{\circ}$ flip angle) pulse sequence. Fast spin-echo (TR/TE=1200/85 msec) was used to obtain the T2-weighted images. Results : The value of T1/T2 relaxivity (R1/R2) of MnPC was $7.28\;mM^{-1}S^{-1}$ and $55.56\;mM^{-1}S^{-1}$ respectively at 1.5 T (64 MHz). Because the T2 relaxivity of MnPC that bonded strongly, covalently manganese with phthalocyanine was very high, the signal intensity of liver parenchyma was decreased on postcontrast T2-weighted images and we could easily distinguish the VX2 carcinoma within the liver parenchyma. When MnPC was administrated intravenously, the tumor margin delineation was more remarkable than Mn-DPDP-enhanced images. The enhancement of liver parenchyma with MnPC persisted at relatively high levels over at least one hour after injection of the contrast agents. Conclusion : The hepatic uptake and biliary excretion of MnPC, which are similar to Mn-DPDP, suggest that this agent is a new liver-specific agent. Also, MnPC seems to be used as a dual contrast agent (T1 and T2) with high T2 relaxivity. However, it is warranted that MnPC needs further investigation as a potential contrast agent for MR imaging of the liver. That is, further characterizations of MnPC are needed in vivo and in vitro before clinical trials. The diagnostic potential of MnPC will also have to be examined more in the animal models of additional types.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1453-1459
• /
• 2011

This research was performed to determine the quality characteristics of cookies made from flour added with 0, 1, 3, and 5% sea mustard (Undaria pinnatifida Suringer) powder. The quality characteristics of the cookies, including pH and density of the dough, moisture content, spread factor, loss rate, leavening rate, color, mineral content, texture properties, and sensory properties, were estimated. The density of the dough, water content, spread factor, loss rate, leavening rate, a and b values of color scale, and mineral content of the cookies significantly increased while those of pH, L value, and hardness decreased with higher content of sea mustard powder. With the exception of flavor, consumer acceptability scores in terms of appearance, taste, texture, and overall preference for cookies made from 3% sea mustard powder significantly ranked the highest. Taken together, the results of this study suggest that addition of 3% sea mustard powder to flour is effective for increasing the consumer acceptability and functionality of cookies.